User`s manual

67
(3) Communications parameters for RS-232C interface
The following settings take effect when the RS-232C interface is set up.
Items Parameters Defaults Refer to:
Non-acknowledge mode √
Communications protocol
ACK/NAK mode
Section 9.1 (1)
4800 bps
9600 bps
19200 bps
38400 bps √
57600 bps
Transmission speed
115200 bps
Section 9.1 (3)
7 bits
Data bit
8 bits √
Odd
Even
Parity
None √
1 bit √
Stop bit
2 bits
Section 9.1 (4)
Enable
CTS signal monitoring
Disable √
Section 9.1 (1)
CTS signal monitoring time 0.1 to 9.9 seconds 2 s
ACK/NAK response confirmation time 0.1 to 9.9 seconds 1 s
Section 9.1 (1)
Scanner ready mode √
RTS signal control protocol
Data ready mode
Section 9.1 (2)
(4) Communications parameters for USB-COM interface
The following settings take effect only when the USB-COM interface is set up.
Items Parameters Defaults Refer to:
Non-acknowledge mode √
Communications protocol
ACK/NAK mode
Section 9.2
Enable
CTS signal monitor
Disable √
Section 9.2
CTS signal timeout 0.1 to 9.9 seconds 2 s
ACK/NAK response time 0.1 to 9.9 seconds 1 s
Section 9.2
Enable √
Remote wake-up
Disable
: Can be changed only with the configuration software.