Specifications

[Issue No.] GOT-A-0010-S [Page] 9/28
[Title] List of Valid Devices Applicable for GOT1000 Series
[Date of Issue] Ver.S: December 2010 (First Edition: September 2005)
[Relevant Models] GOT1000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
(1) System equipment
The following shows the equipment to configure with different types of 2D code readers.
Manufacturer 2D code
reader
Power supply unit RS-232 cable
AIMEX Corporation IT4600SR-RS Included with a 2D code reader Included with a 2D code reader
OMRON
Corporation
V400-F250 Not necessary *1*2
Purchased by the user (V400-W24)
Including a 24VDC power cable
OPD-7435 Included with a 2D code reader Included with a 2D code reader
OPTOELECTRON
ICS CO.,LTD.
NFD1267 Not necessary *3
Produced by the user
Refer to 2 (b) in Section 4.
(5VDC is required.)
TL-30 TL-U1
For GT11, included with a 2D code reader
For GT16 or GT15, refer to 1 (b) in Section 4.
TL-40 TL-U1 Included with a 2D code reader
KEYENCE
CORPORATION
SR-510 BL-U2 GT01-C30R2-9S *4
DataMan 100 DM100-RWR-000 DM100-RS232-000
DataMan 7500 Included with a 2D code reader DM42206139-04
Cognex K.K.
DataMan 7550 Included with a 2D code reader DM42203758-03S
GT10Q-SR Included with a 2D code reader Included with a 2D code reader
GT11Q-SR Included with a 2D code reader Included with a 2D code reader
QB20/20-HD 2000639 496800-0040
QB20K Included with a 2D code reader Included with a 2D code reader
DENSO WAVE
INCORPORATED
QD20 Not necessary *1*2
Produced by the user
Refer to 2 (d) in Section 4.
THIR-3000N S-8440 Included with a 2D code reader
TFIR-3102 Not necessary *1
Produced by the user
Refer to 2 (a) in Section 4.
THIR-6000 Included with a 2D code reader Included with a 2D code reader
TFIR-31 Included with a 2D code reader Included with a 2D code reader
TOHKEN CO.,LTD
THIR-6200DDM Included with a 2D code reader Included with a 2D code reader
Symbol
Technologies, Inc.
DS6608-RS-DO
S/V
Included with a 2D code reader Included with a 2D code reader
*1: It is necessary to supply 24VDC to the 2D code reader separately. For details, please refer to the manual of the 2D code
reader to be used.
*2: For adjusting settings of the 2D code reader by using the monitor, please refer to the manual of the 2D code reader to be
used.
*3: It is necessary to supply 5VDC to the 2D code reader separately. For details, please refer to the manual of the 2D code
reader to be used.
*4: This is a Mitsubishi Electric product. Please contact your local Mitsubishi Electric or representative for purchasing the
cable.