Specifications
[Issue No.] GOT-A-0010-S [Page] 23/28
[Title] List of Valid Devices Applicable for GOT1000 Series
[Date of Issue] Ver.S: December 2010 (First Edition: September 2005)
[Relevant Models] GOT1000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
12. Modem
To use a modem, GT Designer3 Version1.01B
or later is required.
(Compatible Product)
Manufacturer Model
I-O DATA DEVICE, INC. *1 DFML-560ER
Yokogawa Electric Corporation *1 TN30
MITSUBISHI ELECTRIC *2 MIM-A01
MITSUBISHI ELECTRIC *2 MIM-G01
SIXNET *3 VT-MODEM
*1: For Japan
*2: For overseas (Europe)
*3: For overseas (North America)
(1) AT command list
Set AT commands according to a modem to be used.
AT commands to be used differ depending on whether the modem is connected to the GOT or the modem is
connected to a personal computer.
For details of the AT commands, refer to the manual for each modem.
Initialization command
Model
Personal computer side *1 GOT side *2
DFML-560ER AT&F0V1E0Q0%C0&K0&D0W2 AT&F0V1E0Q0%C0&K0&D0W2S0=1
TN30 AT&FV1E0Q0%C0&K0&D0W2 AT&FV1E0Q0%C0&K0&D0W2S0=1
MIM-A01 *3
AT&FV1E0Q0%C0&K0&D0W2+TFORMAT=
"8N1";+TBAUD="9600"
AT&FV1E0Q0%C0&K0&D0W2S0=1+TFOR
MAT="8N1";+TBAUD="9600"
MIM-G01 *4
AT&FE0%C0&K0&D0+CICB=0;+IPR=9600;
+ICF=3,4;+IFC=0,0
AT&FE0%C0&K0&D0S0=1+CICB=0;+IPR=9
600;+ICF=3,4;+IFC=0,0
VT-MODEM AT&FQ0E0V1%C0&K0&D0W2 AT&FQ0E0V1%C0&K0&D0W2S0=1
*1: Enter a command in the initialization command field for GOT Modem Connection Tool.
*2: Enter a command in the initialization command field of [Detail Setting] in the [I/F Communication Setting] dialog box
on GT Designer3.
*3: Configure a communication setting of the MIM-A01 by using AT commands. To configure the setting, use AT
commands (+TBAUD and +TFORMAT). The example shows the case when the baud rate is 9600bps, the data
length is 8 bits, the parity is none, and the stop bit is 1 bit.
*4: Configure a communication setting of the MIM-G01 by using AT commands. To configure the setting, use AT
commands (+IPR and +ICF). The example shows the case when the baud rate is 9600bps, the data length is 8 bits,
the parity is none, and the stop bit is 1 bit.
Personal
computer
RS-232
cable
Modem
Modem
RS-232
cable
Telephone
circuit
GOT1000
series