Specifications
[Issue No.] GOT-A-0010-S [Page] 21/28
[Title] List of Valid Devices Applicable for GOT1000 Series
[Date of Issue] Ver.S: December 2010 (First Edition: September 2005)
[Relevant Models] GOT1000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
(e) Cable connection diagram for an RFID controller (V620) manufactured by OMRON Corporation
RFID controller GOT
Signal name Pin No.
Cable connection and signal direction
Pin No. Signal name
FG 1 1 CD *1
SD 2 2 RD(RXD)
RD 3 3 SD(TXD)
RS 4 4 DTR(ER)
CS 5 5 SG
－
6 6 DSR(DR)
SG 7 7 RS(RTS)
－
8 8 CS(CTS)
ER 20
9
－
*1: NC for GT11
*For the cables between
and , refer to the manual created by OMRON Corporation
(f) Cable connection diagram for an RFID controller manufactured by PONGEE INDUSTRIES CO., LTD
RFID controller GOT
Signal name Color
Cable connection and signal direction
Pin No. Signal name
+12VDC Red 1 CD *1
Ground Black 2 RD(RXD)
TX+ White 3 SD(TXD)
Shield/Ground Yellow 4 DTR(ER)
－
－
5 SG
－
－
6 DSR(DR)
－
－
7 RS(RTS)
－
－
8 CS(CTS)
－
－
9
－
*1: NC for GT11
*For the cables between
and , refer to the manual created by PONGEE INDUSTRIES CO., LTD
(3) How to read data by an RFID controller
Please refer to the followings for the data transfer format (header/terminator settings and others) that can be
used in the GOT or the setting method to read data by an RFID controller.
(a) Data transfer format (header/terminator settings and others) that can be used in the GOT.
(b) Setting to connect an RFID controller to the GOT. ([Peripheral Setting] on GT Designer3 or
[Communication Settings] on GT Designer2)
(c) Setting to write the data, read by an RFID controller, to the PLC CPU. ([Detail Setting] in the [Bar Code]
dialog box on GT Designer3 or [Detail Setting] in the [Bar Code] dialog box on GT Designer2)
Refer to the following.
- GT Designer3 Version□ Screen Design Manual (Fundamentals) (SH-080866ENG)
- GT Designer2 Version
□
Screen Design Manual (SH-080530ENG)
(d) Setting procedure from connecting an RFID controller to the GOT until reading IC tag data.
Refer to the following.
- GOT1000 Series Connection Manual (Microcomputer, MODBUS Products, Peripherals) for GT
Works3 (SH-080871ENG)
- GOT1000 Series Connection Manual (SH-080532ENG)