Specifications

[Issue No.] GOT-A-0010-S [Page] 16/28
[Title] List of Valid Devices Applicable for GOT1000 Series
[Date of Issue] Ver.S: December 2010 (First Edition: September 2005)
[Relevant Models] GOT1000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
(4) Others
For some printers, the print enable/disable status notification signal (GS258.b3) may turn on before the
preparations for printing are not completed.
Check the preparations for printing and then execute the printing process.
6.2 Serial printer
By connecting the GT15-RS2-9P to the GT16 or GT15 built-in interface, or by mounting the GT15-RS2-9P on
the GT16 or the GT15, a serial printer is available.
To use a serial printer,
GT Designer3 Version1.17T
or later is required.
(Compatible Product)
Manufacturer Model Available hard copy size
TP-642EG QVGA, VGA *1
NADA ELECTRONICS, LTD.
TP-1728G QVGA, VGA, SVGA, XGA
SEIKO EPSON CORPORATION VP-700U QVGA, VGA, SVGA
*1: Since the printing width of the data is larger than the paper width, set the printer to “Do not print unprintable area.” or “Reduce and print
data.”
(1) Connection cable
The following shows connection cables that must be produced by the user.
(Maximum cable length: confirm with a printer manufacturer.)
(a) Cable connection diagram for a printer manufactured by NADA ELECTRONICS, LTD.
Printer GOT
Signal name Pin No.
Cable connection and signal direction
Pin No. Signal name
── ── 1 CD
RXD 2 2 RD(RXD)
TXD 3 3 SD(TXD)
── ── 4 DTR(ER)
GND 5 5 SG
── ── 6 DSR(DR)
RTS 7 7 RS(RTS)
CTS 8 8 CS(CTS)
── ── 9 ──
(b) Cable connection diagram for a printer manufactured by SEIKO EPSON CORPORATION
Printer GOT
Signal name Pin No.
Cable connection and signal direction
Pin No. Signal name
── ── 1 CD
TXD 2 2 RD(RXD)
RXD 3 3 SD(TXD)
── ── 4 DTR(ER)
SIGNAL GND 7 5 SG
── ── 6 DSR(DR)
── ── 7 RS(RTS)
DTR 20 8 CS(CTS)
── ── 9 ──