Specifications

[Issue No.] GOT-A-0010-S [Page] 12/28
[Title] List of Valid Devices Applicable for GOT1000 Series
[Date of Issue] Ver.S: December 2010 (First Edition: September 2005)
[Relevant Models] GOT1000 Series
HEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
TECHNICAL BULLETIN
(2) Connection cable
The following shows connection cables that must be produced by the user.
(Maximum cable length: confirm with a 2D code reader manufacturer.)
(a) Cable connection diagram for a 2D code reader manufactured by TOHKEN CO.,LTD
2D code reader GOT
Signal name Pin No.
Cable connection and signal direction
Pin No. Signal name
── ── 1 CD *1
RXD /RD- 2 2 RD(RXD)
TXD /TD+ 3 3 SD(TXD)
── ── 4 DTR(ER)
GND 5 5 SG
── ── 6 DSR(DR)
── ── 7 RS(RTS)
RTS 11 8 CS(CTS)
CTS 12 9 ──
*1: NC for GT11
(b) Cable connection diagram for a 2D code reader manufactured by OPTOELECTRONICS CO.,LTD.
2D code reader GOT
Signal name Pin No.
Cable connection and signal direction
Pin No. Signal name
Trigger Green 1 CD
OK- Yellow 2 RD(RXD)
NG Blue 3 SD(TXD)
SD Purple 4 DTR(ER)
RD Orange 5 SG
RS Brown 6 DSR(DR)
CS Gray 7 RS(RTS)
+5V Red 8 CS(CTS)
GND White 9 5V
(c) Cable connection diagram for a 2D code reader manufactured by KEYENCE CORPORATION
2D code reader GOT
Signal name Pin No.
Cable connection and signal direction
Pin No. Signal name
N.C 1 1 CD
SD(TXD) 2 2 RD(RXD)
RD(RXD) 3 3 SD(TXD)
N.C 4 4 DTR(ER)
SG 5 5 SG
N.C 6 6 DSR(DR)
CS(CTS) 7 7 RS(RTS)
RS(RTS) 8 8 CS(CTS)
N.C 9 9 ──