Specifications

Parameter name Type R/W Control code Parameter value Default Validating timing
Display related
Screen rotation DW R/W BHT_DISP
_ROTATION
DISP_ROTATION_0
: 0°
DISP_ROTATION_90
: 90°
DISP_ROTATION_180
: 180°
DISP_ROTATION_270
: 270°
DISP
_ROTATION_0
Immediately
after setting
Screen rotation control
key
DW R/W BHT_DISP
_ROTATION_KEY
Key no. None Immediately
after setting
Touch screen related
Touch screen disabling DW R/W BHT_TOUCH
_DEVICE
TOUCH_ENABLE
: Enable
TOUCH_DISABLE
: Disable
TOUCH_ENABLE Immediately
after setting
Bluetooth related
Bluetooth device initial
power status
DW R/W BHT_BT_INITIAL_
POWER_STATUS
BHT_BT_POWER_OFF
: Power OFF
BHT_BT_POWER_ON
: Power ON
BHT_BT
_POWER_OFF
Immediately
after setting
Audio related
Voice output from
receiver
DW R/W BHT_AUDIO_OUT
_RCV
BHT_AUDIO_OUT_RCV
_DISABLE
: Disable
BHT_AUDIO_OUT_RCV
_ENABLE
: Enable
BHT_AUDIO_OUT_
RCV_DISABLE
Immediately
after setting
(*1) The RAM or ROM size obtained indicates the capacity of the memory mounted on the BHT. To obtain t
he size of the memory area allowed for the user to use, use GetDiskFreeSpaceEx.
(*2) If the CPU clock is set to high speed, the processing speed becomes higher but the power
consumption Increases.
(*3) This parameter controls the on/off of the click sound of the magic key which the trigger switch is
assigned to. If it is set to ON, pressing the magic key clicks at the volume specified by the "Key clock
volume."
(*4) If this parameter is set to "0," the BHT no longer reads the same barcode in succession.
(*5) Only for BHT-700B
(*6) Only for BHT-700Q
56