Specifications

15.3. System Parameter Values That Can be Set/Obtained
Parameter name Type R/W Control code Parameter value Default
Validating
timing
System information related
System version
(4 characters)
WCS R BHT_SYS_OS
_VERSION
- - -
Total RAM size
(bytes)(*1)
DW R BHT_SYS
_RAMSIZE
- - -
Total ROM size
(bytes) (*1)
DW R BHT_SYS
_ROMSIZE
- - -
Model name
(8 characters)
WCS R BHT_SYS
_MACHINE_NAME
- - -
Product number
(16 characters)
WCS R BHT_SYS
_MACHINE_NUMBER
- - -
Serial number
(6 characters)
WCS R/W BHT_SYS
_SERIAL_NUMBER
6-digit number Lower 6 characters in
the code printed on the
back of the BHT
Immediately
after setting
Power management related
Waiting time to switch to
standby mode (in units
of 100 ms)
DW R/W BHT_PM_STBYTIME 0: Disable
1 to 255
10 (1 sec) Immediately
after setting
Waiting time to auto
power OFF when
powered by battery
(sec.)
DW R/W BHT_PM
_BATTPOWEROFF
0: Disable
1 to 0xFFFFFFFF
180 (3 min) Immediately
after setting
Waiting time to auto
power OFF when placed
on CU (sec.)
DW R/W BHT_PM
_EXTPOWEROFF
0: Disable
1 to 0xFFFFFFFF
0 Immediately
after setting
CPU clock (*2) DW R/W BHT_PM
_CPU_CLOCK
CPU_CLK_NORMAL
: Regular speed
CPU_CLK_FAST
: High speed
CPU_CLK_NORMAL When warm-
booting after
setting
Auto Power OFF
permitted when wireless
connection open
DW R/W BHT_PM_SUSPEND
_RF
SUSPEND_DISABLE
: Suspend prohibeted
SUSPEND_ENABLE
: Suspend permitted
SUSPEND_ENABLE Immediately
after setting
Beeper and vibrator related
Rumble device DW R/W BHT_BEEP_VIB
_SELECT
BEEP_SELECT
: Beeper
VIB_SELECT
: Vibrator
(BEEP_SELECT
| VIB_SELECT)
: Beeper and vibrator
BEEP_SELECT first sound
after setting
Beeper volume DW R/W BHT_BEEP_VIB
_VOLUME
0:OFF
1 (lowest)
to 5 (highest)
5 first sound
after setting
Key click volume DW R/W BHT_BEEP_VIB_KEY 0: OFF
1: Soft
2: Loud
2 first sound
after setting
Screen tap volume DW R/W BHT_BEEP_VIB_TAP 0: OFF
1: Soft
2: Loud
2 first sound
after setting
Trigger switch clicks(*3) DW R/W BHT_BEEP_VIB
_TRGKEY
CLICK_SOUND_OFF
: Prohibit
CLICK_SOUND_ON
: Allow
CLICK_SOUND_OFF first sound
after setting
51