User Manual

23
Preparation
2
Tap the “+” that displays at the calibration
screen in the center with the stylus for
approximately 1 second. Next touch the
center of the “+” each time it moves. (The
“+” mark moves from the center of the
screen to the upper left, lower left, lower
right and upper right, making a total of 5
positions.)
Point
The power cannot be turned OFF by pressing
the power key during touch screen calibration.
Press the power key when calibration is
complete.
3
Press the ENT key or tap the screen to
complete touch screen calibration and
display the data and time setting screen.
4
Set the date, time and time zone and then
tap the OK button.
Step 3 Turning ON the Power