User Manual

22
Preparation
Holding the BHT
Insert your hand into the hand belt and hold the BHT as shown below.
Step 3 Turning ON the Power
It is necessary to perform touch screen calibration and set the date and time when
turning ON the BHT power for the first time. Press the power key to turn ON the BHT
power. The calibration screen should then display.
If the calibration screen does not display, first perform a “full reset”. Refer to
“Resetting and Full Resetting” (page 46) for details of the full reset method.
1
Press the power key to turn ON the
BHT power.
Power key
Step 2 Attaching the Stylus