User Manual

19
Preparation
Charging with the battery charger (CH-704)
* The battery cartridge shown in the drawing is the BT-700LL.
1
Check the battery cartridge
terminals and insert the cartridge.
2
Connect the power cable to the
CH-704 and connect the plug to a
commercial AC power source (100
V AC).
The LED will turn red when charging is
commenced.
3
The red LED flashes slowly (1
second ON, 1 second OFF) when
charging is complete.
Point
 Charging takes approximately 3
hours (standard rechargeable
battery cartridge) or 6 hours
(large-capacity rechargeable
battery cartridge).
 An only slightly discharged battery
cartridge should take this time to
become fully charged.
Step 1 Charging