User Manual

17
Preparation
Charging with the communication unit
(CU-733, CU-714) or battery charger (CH-751)
* The battery cartridge shown in the drawing is the BT-700L.
Disconnect the hand belt.
Insert the battery cartridge cover (1)
tabs into the BHT and load the
cartridge in the direction shown by
the arrow (2).
3
Slide the battery cartridge cover
release buttons (1)/(2) in the
direction shown by the arrows and
return the hand belt (3) to its original
position.
4
Connect the dedicated AC adapter
to the DC input connector on the
charger and plug the adapter into
the wall socket.
The charger Power LED (green)
turns ON.
1
2
Step 1 Charging