User's Manual

The 2D Code Handy Terminal uses a laser light for indicating the scanning range. The
intensity of the laser light is too low to inflict bodily injury. However, do not stare into
beam.
You must observe the following precautions when handling the BHT equipped with laser
light.
1) Never stare into the reading window.
2) Never point the reading window at someone’s eye.
The 2D Code Handy Terminal complies with IEC 60825-1 Ed. 2: 2007.
In accordance with Clause 5 and 6, IEC 60825-1, the following information is provided to
the user:
Reading Window
(Laser Light emission window)
BHT-1281QULWB-CE
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Caution – Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
CAUTION
Handling the BHT
 Incorrect handling of the BHT could cause generation of heat and smoke from the BHT, and
malfunction. Be sure to observe the following to use the device correctly.
 When using the hand strap or neck strap, exercise due care to avoid getting them caught in
other objects or entangled in rotating machinery.
Failure to do so could result in accident or injury.
 Do not use the BHT in the vicinity of wireless devices such as personal radios and ham radios.
This could cause malfunction of the BHT.
 Do not place magnetic cards or the like near the BHT speaker.
Doing so may result in the loss of magnetic data from cash cards, credit cards, etc.
 Do not place your ear near the speaker/beeper when tones are being emitted.
Doing so may result in hearing loss.
 Do not apply excessive force when inserting or removing the battery.
Doing so will result in damage.
 In environments where static electricity can build into significant charges (e.g., if you wipe off the
plastic plate with a dry cloth), do not operate the BHT.
Doing so will result in malfunction or machine failure.
 Do not drop the BHT on the floor or apply strong shock to it.
Doing so could cause malfunction of the BHT.
 Do not use batteries other than the specified ones.
 Make sure that the BHT and the battery are dry before putting it in the Cradle.
Failure to do so could result in fire or electrical shock.