User's Manual

vii
Operating Environments
• Never leave the product in places where there are excessively high temperatures, radiant heat, or
in places exposed to direct sunlight.
Failure to comply could affect the parts, and cause a fire.
• Do not use the product in places where there are drastic temperature changes.
Failure to comply could cause a malfunction, a fire or electrical shock.
• Do not install the product near a motor, an inverter, or a switching power supply.
Noise from these devices could interfere with the wireless communication between the product and the
tag.
Examine these noises carefully before the product is installed.
• Keep the product or the connection cable away from high voltage and high current wiring.
Failure to comply could cause a wireless communication error between the transceiver and tag, or
between the transceiver and the upper device.
• Keep the appropriate distance specified in this manual between the transceiver and tag to avoid any
interference.
Failure to comply could cause a wireless communication error between the transceiver and tag.
Precautions when Handling
• Never touch the connector terminals.
Failure to comply could damage the product by ESD.
• Do not apply static electricity to the connector terminals and product itself when installing or wiring
the product.
Failure to comply could cause a fire or electrical shock.
• Do not pull the connector cable.
Failure to comply could disconnect the cable, damage the product inner part, burn the product, or
cause a fire, or electrical shock.
• Do not use chemicals or oil which may affect the material of the product.
Failure to comply could damage the product.
• Never disassemble or modify the product.
Failure to comply could cause a fire or electrical shock.
• When pluging/unplugomg the connector, always turn the product off.
Failure to comply could cause malfunction, electrical shock or breakdown.
• Do not touch the product with bear hands when operating or right after operation.
Failure to comply could cause a burn.
• Install the product making sure it is not loose by tightening the screw within the torque specified in
this manual.
Failure to comply could cause a damage or malfunction.
• If you are not using the product for a long time, be sure to unplug the connection cable for safety.
Failure to comply could cause a fire.
• When maintaining the product, unplug the connection cable for safety.
Failure to comply could cause electrical shock.
if used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.