User`s manual

8.3 Fixed installation
If you want to have a fixed installation, with Wi-Drive possibly hidden, follow
these steps:
1. Connect the wire power wire harness to the cars electrical system.
The red wire needs to be connected to constant +12V with a supply of
1 Amps at least.
2. Connect the USB 3G modem to the lower connector of the double USB port
3. Connect the power wire harness connector to Wi-Drive
4. Follow the Setup guide in chapter 1
Hint: You can increase 3G reception quality if you place the 3G modem near to a
window, or other non-covered area. Use a good quality standard USB extension
cable.