User manual

ManualsBrandsDension ManualsComputer equipmentLite BT

Tips and Tricks:

You can easily define how the CD selection buttons

are assigned by naming the Folders as: 1-Rock, 2-

Blues, 3-Pop, etc. as shown below:

Depending on the capacity of the USB drive building

the database may take some time. During this pro-

cess you may not have access to your music, so you

might find our Gateway Indexer Software helpful in

speeding up the indexing procedure. It can be down-

loaded from

http://www.dension.com/sites/default/files/

windows-utility/gatewayindexer.zip

When changing the music content on your USB

drive, it is highly recommended to delete the index

files (GW_DBx.BIN) from the root folder.

NABLING

EXT

ISPLAY

Gateway Lite BT is designed for cars without text

display – except for compatible BMW and Toyota

models.

When installing the device in a BMW, the text (song

info) can be displayed on several screens (Radio, MID

or Navigation) and it has to be set after the Gateway

installation. In order to activate text display mode

you need to enter the Text selector mode:

• Turn the Radio ON and select the Gateway (CD-

Changer)

• Disconnect all devices from the Gateway and

wait until ‘Disc 1/Track99’ appears

• Keep the FF (Fast Forward) button pressed for

at least 10 seconds, then release. The display

turns to ‘Disc 1/Track 01’ within 3 seconds (Text

selector mode)

• Press the Next track button ( ) to toggle Tracks

02 through 04 to set the screen mode

• Please note: Track 01 is the non-Text Mode

• After setting the appropriate mode, press FF

( – Fast Forward) to confirm. Pressing the

REW ( – Rewind) button will exit the Text se-

lector cancelling all changes

• If the text selection procedure was correct AUX

GW will appear on the display

Please note: Text display is possible on some Toyota

radios as well. Press “DISP”, “TXT” or “TEXT” button

on the radio to activate it.

ANDSFREE FUNCTIONS

Connecting a phone

Pair the phone to the Gateway from your phone’s

Bluetooth menu. Enter the Bluetooth menu on your

phone (in ‘tools’, ‘connections’ or ‘settings’, etc.)

search for available devices, select Gateway Lite BT

and enter the code 8888 to connect. Check the

connection status on the phone’s screen. Your device

is now paired and will automatically connect each

time the Gateway is switched on and is near (Phone

dependent). If the reconnection procedure is not

successful (or the BT was turned off on the phone)

the Gateway tries to reconnect automatically. If the

connection cannot be established or the Gateway

Lite BT is not visible, please turn the radio and the

ignition off, remove the car key, wait for a minute

and retry the pairing procedure.

Receiving, Making Phone calls and dialing

When you receive an incoming call in Gateway mode

(CD-Changer mode), the music gets muted and the

ringtone is directed to the speakers (phone depend-

ent). Please wait for 4 seconds (needed to activate

the Handsfree profile) then press the Next track

button ( ) to accept the call. You can terminate an

ongoing call or reject an incoming call by pressing the

Previous track ( ) button. After finishing the call, the

Gateway will return to the original Gateway source.

If you have an incoming call when the Radio or Single

CD source is playing, the actual audible content will

be muted periodically (the mute wire must be con-

nected to the radio). Press or select the CD-changer

source (Gateway mode) on the radio to answer the

call (the call will be accepted automatically after

switching source). After finishing the call, you can

switch back to the previous source manually.

Making a phone call is possible using the mobile

phone only. The Bluetooth hands free mode works in

Gateway (CD-Changer) mode only. It has to be se-

lected, or the conversation will not be heard through

the car speakers.

You can reject an incoming call by pressing the Previ-

ous track button ( ) if the Gateway source is select-

ed.

Changing the hands free quality and microphone

sensitivity

If the factory default settings is not optimal for the

hands free operations, press the Next track button

during the phone call ( ) to go through the 10 differ-

ent volume values consequentially (a beep will be

audible when changing). If you find the optimal

sound level, cease from pushing the Next track

button to save settings automatically after the con-

versation.

Music Playback via Bluetooth (A2DP streaming)

Gateway Lite BT supports audio playback via Blue-

tooth from a mobile phone using A2DP/AVRCP and

HSP profiles. During the playback Previous/Next

buttons ( / ) are functioning (phone dependent)

from the car radio or the steering wheel.

For music playback via Bluetooth please disconnect

all other devices (USB or iPod) that are connected to

the Gateway Lite BT.

Please note that with certain Bluetooth devices:

Remote controlling may not be available

The media player on the phone may have to be

started / stopped manually

ROUBLESHOOTING

Symptom

Cause

Solution

USB is not

recognized

1. Wrong file system

2. The content is

write protected

3. Not supported

media

4. Problem with

indexing

1. Check the file

system (FAT32 is

supported only)

2. Check the file

settings

3. Use compatible

file formats

4. Delete index

files from the

root and index it

again using the

Gateway indexer

No text display

- although it

was working

earlier (only on

BMW or Toyo-

ta)

iPod UI selected

Change the iPod

mode to iPod GW

mode

Radio is not

muted

Mute wire is not

connected to the

radio

Please connect the

mute wire according

to the installation

guide

Remote co

trol is not

working in BT

audio mode

BT settings of the

phone might be

incorrect

Close all running

application, delete

pairing history,

reboot the phone

and pair again

ISCLAIMER AND

ARRANTY

Disclaimer

If your car’s electrical system begins to behave errati-

cally, please disconnect the Gateway Lite BT device

physically immediately and have it checked by your

installer or an automotive electronics professional.

Dension and its authorized distributors and retailers

are not liable for any incidental consequential or

indirect damages or loss and do not assume liability

for any diagnostic fees.

The use of handheld devices while driving may be

subject to government legislation. Please ensure that

your use of the Dension device complies with appli-

cable traffic laws. Dension does not assume liability

for any events resulting from the illegal or irresponsi-

ble use of handheld devices while driving.

Dension reserves the right to modify its products or

specifications without prior notice.

Warranty

Dension devices carry a one-year limited warranty

that protects you from defects in material and work-

manship of products sold by Dension or its author-

ized distributors and retailers. Dension does not

warrant any installation work or assume liability for

any damage caused due to negligence, improper

installation or operation. For warranty claims, proof

of purchase is required

Update and Support

If you need further assistance in using your Dension

Smartlink, please contact your local supplier or visit

www.dension.com and click on ‘Support’.

Please check the download section for the latest

firmware version and product documentation of your

Gateway device, as these may provide additional

features or easier use of the product.