Specifications

2. DEVICE CONNECTIONS AND INDICATORS
3. CHARGING
The battery of the Trip Stick can be charged using
a standard USB cable via
• AC Power Adapter (5V DC out)
• PC / Notebook
• Cigar lighter charger (5V DC out)
While the Trip Stick is charged the blue LED next
to the DC connector will be constantly ON. The
LED turns off immediately when the battery is fully
charged (approx. 4hrs).
4. POWER BANK
The Dension Trip Stick works as a portable
charger that lets you enjoy more time with your
portable devices (like phone, digital camera,
handheld consoles or portable player) which use
standard USB cable for charging.
How to charge connected device(s)
1. Connect the USB cable of the device to the
Trip Stick.
2. Turn the Mode Selector switch of the Trip
Stick either to ‘C’ (Charge) mode.
Please note: Charging function is available also
in ‘R’ (Router) mode, if the Router function is also
necessary.
5. WIRELESS ROUTER OPTIONS
Computer settings
Before connecting to the Dension Trip Stick please
make sure that the wireless network settings on
your computer are set to ‘automatically obtain IP
address’ and ‘automatically obtain DNS’.
Turn the mode selector switch of the Trip Stick to
‘R’ (Router) mode.
Turn the Wireless LAN (WiFi) of the computer
ON, search for available networks and connect to
‘3Grouter_...’. The name of the WiFi connection
can be changed later in the Trip Stick’s settings
menu.
Open a web browser on your computer and
enter the address ‘192.168.169.1’ to get to the
configuration page of the device.
Enter the default password ‘admin’ and click on
the Login button.
You are now on the settings page of your Trip
Stick device, where you can set up your internet
connection and WiFi preferences.
Please note: If you changed the WiFi preferences
(e.g. Network name, Password), you may need to
reconnect your computer to the Trip Stick. If the
Trip Stick does not work as it is expected, press
and hold the reset button on the device for 5
seconds in order to set all settings back to the
factory default.
INTERNET SHARING FROM 3G USB MODEM
Dension Trip Stick is capable of creating WiFi
hotspot using a 3G USB dongle. Follow the steps
below in order to set up this function:
1. Connect the 3G USB modem to the USB
port of the Trip Stick
2. Turn the mode selector switch of the Trip
Stick to ‘R’ (Router) mode.
3. Turn ON your Wireless LAN option on your
device and connect it to the Trip Stick (WiFi
name: 3GRouter…)
4. Open a web browser on your computer and
enter the address ’192.168.169.1’
5. Enter the password (default ‘admin’) and
click on the Login button.
6. Select the internet icon and then ‘WAN
Network’ option
7. Select “3G” option as a WAN Connection
type from the drop down list
8. Add the PIN code of the SIM card
(if necessary) and press ‘Apply’. The
connection will be established (status LED
will be solid) within 1 minute (depending on
your signal strength & speed).
If the connection cannot be established, please
go back to the ’WAN Network’ settings, select
‘Manual APN’ option and fill in manually the APN
settings from your provider. When it’s done, press
the ‘Apply’ button and test the connection again.