Troubleshooting guide

Troubleshooting Guide for Installing Dension Products
6
On some BMW radios, there is an ‘M’ button between the Next Track and Previous Track buttons to
change the function to FF (Fast Forward) and REW (Rewind).
On these radios, use the ‘M’ button for the text activation procedure:
1. Turn the Radio ON and select the Gateway (CD-Changer)
2. Disconnect all devices from the Gateway and wait until CD5 / Track99 is displayed on the radio
3. Press the ‘M’ button on the radio, an ‘M’ should appear on the radio display
4. Keep the FF (Fast Forward) button pressed for at least 10 seconds, then release.
5. The display will show ‘Disc 1 / track 01’ within 3 seconds (indicating that you are in text
selection mode)
6. Press the ‘M’ button on the radio to select Next/Back function
7. By pressing the Next track button, you can choose Tracks 02 through 04 which represent
different screen modes (e.g. MID, Radio). Please note: Track 01 is non-Text Mode
8. After choosing the mode you prefer, press ‘M’ then press FF (Fast Forward) to confirm and
save the selection. Or, by pressing the REW (Rewind) you can exit Text selector and discard
changes.
9. If the text mode selection is correct ‘AUX GW’ will appear on the display
10. If the text selection was not successful, try again from step #3 and chose another option. Some
radios will work only with a specific track setting.
B. How to set text display on Toyota
Some Toyota radios are capable of displaying basic text information. To show these press “DISP”, “TXT”
or “TEXT” button on the radio. If you have any of these buttons on the radio and the text information
does not appear on the display, your radio is not capable of displaying such information.