User Manual
Table Of Contents
- I. Preparation
- II. Upgrade procedure
- II-1. Remove the external parts
- II-2. Remove the HDMI PCB
- II-3. Attach the HDMI 8K label and A label to the rear panel
- II-4. Install the HDMI 8K PCB of the upgrade kit
- II-5. Tidy up the wires
- II-6. Update the firmware
- II-7. Attach the external parts
- II-8. Attach the label and door cushion
- II-9. Pack the product
- III. Upgrade information
20 / 25
III. Upgrade information
III-1. Information customers should know prior to the upgrade
Once the upgrade is performed, the following settings will reset to factory default settings. The backup
memory such as volume level will be erased as well. It is necessary to setup the product once again when the
product is returned.
・Audyssey® Setup
・Speaker Config.
・Changing the “Quick Select Name”
・Network connection
・Last function memory
・Various settings using the custom installer
・All the other settings in the backup memory
Notes:
The "Save & Load" function does not work. The saved settings can not be restored once the upgrade is
performed on the product.