User Guide

46
CHECK LIST FOR AFTER-REPAIR-CHECK
1-1 BD and DVD
(1)
Prepare for playback.
q Turn on the TV and subwoofer power.
w Change the TV input to the input of this unit.
(2)
Press ON to turn on power to
the unit.
Front
Rear
(3)
Insert a disc.
• Press 5 on the main unit to open/
close the disc tray.
• When the disc tray opens, the input
source automatically switches to
“BD/SD” and the unit enters “Disc
Mode”.
• If a disc is already inserted in the
disc tray, switch to “Disc Mode” by
selecting BD/SD.
(4)
Make the various settings for
playback on the disc menu.
uio p····················································
Select
ENTER·························································
Confirm
• You can make the following settings
on the disc menu. (Settable items vary
depending on the disc.)
• Subtitle language
• Audio language
• Audio format etc.
• During DVD-Video playback, press TOP
MENU
or POPUP/MENU to display the
menu.
If the menu continues, press uio p
to get to the next part.
(5)
Press uio p in the Top Menu screen to select
the title or chapter.
• If you use 1 – 9, +10 to select the chapter or title, you can start
playback.
With Blu-ray Disc, depending on the disc, you can select title and
chapter from the popup menu.
(6)
Press ENTER.
Playback starts.
n Adjusting the Master Volume
Press VOL df.
n Stop Playback (Resume Function)
Press 2.
n Pause Playback
Press 3.
n Step-by-Step Playback
During pause, press 3.
n Fast Forward/Fast Reverse Playback
During playback, press 6 7.
n Slow Forward/Slow Reverse Playback
During pause, press 6 7.
n Skipping to the Chapter
During playback, press 8 9 or ui.
n Repeat Playback
Press REPEAT.
n Switching Audio
During playback of a Primary Audio/Secondary Audio title,
press AUDIO/RDS.
NOTE
When playing back a high-quality signal such as Dolby TrueHD,
Dolby Digital Plus, or DTS-HD, set the “BD Audio Mode” to “HD
Audio Output”.
Check Block
VIDEO : F/E Unit → B/E Unit → DIGITAL Unit(1/2)
AUDIO : F/E Unit → B/E Unit → DIGITAL Unit
(HDMI Reciver → DIR → Selector → A.DSP
→CODEC) → Analog Audio Unit(2/2) →
D.AMP Unit