User Guide

28
5.4. Stopping the mode
When the
2
button is pressed, the layer above the current layer is displayed. The relationship between the different
modes and the display of the different layers is shown on the table below.
Mode 1 layer 2 layer 3 layer
Laser on/off (CD/DVD/BD) mode T2 LaserOnOff T2X mmmm nnnn Non
Servo adjustment value display mode T3 Servo Adj. TXXX TXXXmmmmmm nn
Error rate (skew) measurement mode T7 Error Rate TYYFFFFFFFFFF TYYmmmmmmllll
Accumulated laser on time display mode TC LaserOnTim TCY mmmmmmh
TCY* mmmmmmh
TC4*
Track buffer output mode TE Track Buf TEYTrack Buff Non
Picking up No. display mode TG OPU Number TGX YYYYYYY Non
Error log display mode TH Error Log
nTHX
nTH1 No Error
nTHX dddddd
nTHAyyy dddd
Test mode cancel TI Test Exit TI1 Really? Non
5.5. About the OPEN/CLOSE (
5
)button
Even during the test mode, the tray is opened and closed when the
5
button is pressed.
5.6. Test mode detailed table
Table 1: Servo adjustment value display mode details
No XXX Name Address range Meaning
0 T30 BUF_ID_SDRAM 0x000000
～
0x3FFFFF SDRAM
1 T31 BUF_ID_MPU_ALL 0x000000
～
0xBEFF3F MPU(Abs Access)
2 T32 BUF_ID_MPU_RMCR 0x000000
～
0x00FFFF ROMCOR
3 T33 BUF_ID_MPU_SYSCFG 0x000000
～
0x000FFF SystemCongration
4 T34 BUF_ID_MPU_DMAC 0x000000
～
0x0004FF DMAC
5 T35A BUF_ID_MPU_ITIM0 0x000000
～
0x0000FF ITIM 0
6 T35B BUF_ID_MPU_ITIM1 0x000000
～
0x0000FF ITIM 1
7 T35C BUF_ID_MPU_ITIM2 0x000000
～
0x0000FF ITIM 2
8 T35D BUF_ID_MPU_ITIM3 0x000000
～
0x0000FF ITIM 3
9 T35E BUF_ID_MPU_ITIM4 0x000000
～
0x0000FF ITIM 4
10 T35F BUF_ID_MPU_ITIM5 0x000000
～
0x0000FF ITIM 5
11 T36 BUF_ID_MPU_RSV2 0x000000
～
0x0079FF Reserved
12 T37 BUF_ID_MPU_WDT 0x000000
～
0x000FFF WDT
13 T38 BUF_ID_MPU_UART0 0x000000
～
0x0000FF UART 0
14 T39 BUF_ID_MPU_UART1 0x000000
～
0x0000FF UART 1
15 T40 BUF_ID_MPU_CSIO0 0x000000
～
0x0000FF CSIO 0
16 T41 BUF_ID_MPU_CSIO1 0x000000
～
0x0000FF CSIO 1
17 T42 BUF_ID_MPU_GPIO0 0x000000
～
0x0000FF GPIO 0
18 T43 BUF_ID_MPU_GPIO1
0x000000
～
0x0000FF GPIO 1
19 T44 BUF_ID_MPU_GPIO2 0x000000
～
0x0000FF GPIO 2
20 T45 BUF_ID_MPU_RSV5 0x000000
～
0x00BCFF Reserved
21 T46 BUF_ID_MPU_HEXBIU 0x000000
～
0x000FFF HEXBIU
22 T47 BUF_ID_MPU_HCSC 0x000000
～
0x000FFF HCSC
23 T48 BUF_ID_MPU_RSV6 0x000000
～
0x7DDFFF Reserved
24 T49 BUF_ID_MPU_RSV7 0x000000
～
0x3DFEFF Reserved
25 T50 BUF_ID_MPU_INT 0x000000
～
0x00003F INT
26 T51 BUF_ID_IRAM 0x000000
～
0x003FFF IRAM(internal SRAM))
27 T52 BUF_ID_DSP 0x000000
～
0x001FFF DSP Register
28 T53 BUF_ID_AFE 0x000000
～
0x0000FF AFE Register
29 T54 BUF_ID_SVO_ALL 0x000000
～
0x001FFF SVO REG ABS ACCESS
30 T55 BUF_ID_SVO_REG 0x000000
～
0x0007FF SVERVO REG