User Guide

23
4. KEY LOCK mode
4.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
4.2. procedure
(1) While pressing
2
and
1
/
3
buttons simultaneously, plug the AC cord into a power outlet.
(2) "KEY_LOCK_MODE" is displayed on the FL tube. This sets the KEY LOCK mode.
K E Y L O C K M O D E
p r e s s a n y k e y
4.3. KEY LOCK mode(with Master Volume)
(1) While the indication of section 4.2 is displayed on the FL tube, press the
9
button.
(2) "Key_Lock_w/_VR" is displayed on the FL tube. This sets the KEY LOCK mode (with Master Volume).
K e y L o c k w / V R
4.4. KEY LOCK mode (without Master Volume)
(1) While the indication of section 4.2 is displayed on the FL tube, press the
8
button.
(2) "Key_Lock_w/o_VR" is displayed on the FL tube. This sets the KEY LOCK mode (without Master Volume).
K e y L o c k w / o V R
4.5. REMOTE LOCK mode
(1) While the indication of section 4.2 is displayed on the FL tube, press the
1
/
3
button.
(2) "Remote_Lock" is displayed on the FL tube. This sets the REMOTE LOCK mode.
R e m o t e L o c k
4.6. TRAY LOCK mode
(1) While the indication of section 4.2 is displayed on the FL tube, press the SOURCE button.
(2) "Tray_Lock" is displayed on the FL tube. This sets the REMOTE LOCK mode.
T r a y L o c k
4.7. KEY LOCK mode cansel
(1) Plug the AC cord into a power outlet.
(2) While pressing
2
and
1
/
3
buttons simultaneously, plug the AC cord into a power outlet. This sets the KEY LOCK
mode.
(3) While the indication of section 4.2 is displayed on the FL tube, press the
2
button.
(4) "CLEAR" is displayed on the FL tube, each mode in sections 4.3., 4.4., 4.5., and 4.6. is cancelled.
C L E A R