User Guide

17
SERVICE MODE
s
Special mode setting button
No. Mode contents
Button
A
Button
B
Entering the mode
1 Initialization mode
Backup data initialization is carried out.
(Remove settings for Network Setup.)
SOURCE
9
ON/STANDBY button
2 Heatrun & Version display mode
Opration Heat run mode
SOURCE
8
AC cord
Serial No. and rmware versions such as Main, Sub, DSP
are displayed in the FL manager.
3 Displaying the protection history mode Displaying the protection history
5 8
ON/STANDBY button
4 KEY LOCK mode
Operations using main unit panel buttons or master volume
are rejected.
2 1
/
3
AC cord
Operations using main unit panel buttons are rejected
Panel lock mode is cancelled.
Operations using remote control are rejected.
Operations using Tray open are rejected.
5 Test mode Pickup & Dirve Test.
2 9
AC cord
1. Initial setting mode
1.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
1.2. procedure
b
Initialize the BD player when µcom, peripheral parts of µcom, or MAIN P.W.B. unit has been replaced in servicing.
b
All user setting will be lost and its factory setting will be restored when this initialization is made. Be sure to memorize
your setting for restoring again after the initialization.
(1) Plug the AC cord into a power outlet.
(2) While pressing SOURCE and
9
buttons simultaneously, press the ON/STANDBY button. FL tube all lit.
(3) Release your ngers from the SOURCE and
9
buttons.
(4) The display on the FL tube switches to "INITIALIZING" / "Please_Wait" → "BD/SD" / "INITIALIZING" →
"BD/SD" / "INITIALIZED" and initialization is completed.
z
Afterwards, it enters the FIRST SETUP mode.
ON/STANDBY