User Guide

61
S-302
M30627FHPGP (IC301: 1U-3808)
Pin No Port name Function I/O Explanation
1 VREF VREF - AD standard +3.3V
2 AVCC AVCC - AD +3.3V
3 P97/SIN4 DSP_MISO I Data input from DSP
4 P96/SOUT4 DSP_MOSI O Data output to DSP
5 P95/CLK4 DSP_CK O Clock output to DSP
6 P94 I2CSEL O I2C switching control terminal ( ESS / Sub-uCom )
7 P93 N.C. O OPEN
8 P92/SOUT3 N.C. O OPEN
9 P91/SIN3 N.C. O OPEN
10 P90/CLK3 N.C. O OPEN
11 P141 N.C. O OPEN
12 P140 _FLI_RST O FLI2310 reset
13 BYTE BYTE - GND(Ext. data bus bit width switching, 16bit="L")
14 CNVCS CNVSS - Singlechip/Microprocessor mode switching (Normal single-chip:L, Rewrite boot pro-
gram start:H input set)
15 P87 N.C. O OPEN
16 P86 _HDMIT_RST O Reset for HDMI TRANSMITTER (Si I9030)
17 RESET SUB_RST I Reset signal input from main uCom
18 XOUT X1 O Connect to Oscillator
19 VSS VSS - GND
20 XIN X2 I Connect to Oscillator
21 VCC1 VCC1 - +3.3V
22 P85/NMI _NMI I Not used(Fixed:"H")