User Guide

- 9 -
COMMAND and PARAMETER list (TUNER)
COMMAND PARAMETER
function example
TF UP TUNER Frequency UP/DOWN TFUP<CR>
DOWN TFDOWN<CR>
******
(6 digits)
--- ****.** kHz at AM band (>050000 is AM.)
****.** MHz at FM band (<050000 is FM.)
TF105000<CR>
(1050.00kHz at AM)
? Return TF Status TF?<CR>
TP UP TUNER PRESET CH UP/DOWN , direct change to No.** TPUP<CR>
DOWN TPDOWN<CR>
**(PRESET No.) TP10<CR>
(PRESET No.”10”)
? Return TP Status TP?<CR>
TM TUNER BAND , MODE Select
AM ---Band set to AM TMAM<CR>
FM ---Band set to FM TMFM<CR>
? Return TM Status TM?<CR>
AUTO ---Tuning mode set to AUTO mode TMAUTO<CR>
MANUAL ---Tuning mode set to MANUAL mode TMMANUAL<CR>
TF COMMAND : '*' parameters can NOT operate when INPUT source isn’t TUNER.