DENON AVR/AVC control protocol Ver. 6.
Protocol specification The following three data forms are defined. COMMAND : The message sent to a system(AVR/AVC) from a controller(Touch Panel etc.) A command to a system is given from a controller. EVENT : The message sent to a controller(Touch Panel etc.) from a system(AVR/AVC) The result is sent, when a system is operated directly and a state changes. *The form of EVENT presupposes that it is the same as that of COMMAND. **Refer to the following table for the contents of COMMAND and EVENT.
The example of a command * is the meaning of 0x0D.
Others A) COMMAND is receivable also during transmission of EVENT. B) Since CHANNEL VOLUME changes simultaneously when the SURROUND MODE changes, the value of the channel volume of all channels returns as EVENT. C) CHANNEL VOLUME returns the data of ALL channels by the present SURROUND MODE also including an intact channel. In this case, the data of an intact channel is set to "50".
COMMAND and PARAMETER list (AMP) COMMAND PARAMETER function example ON POWER ON/STANDBY change PWON STANDBY PWSTANDBY ? Request PW Status PW? MV UP MASTER VOLUME UP/DOWN, direct change to ***dB MVUP DOWN MVDOWN ** **:00 to 99 by ASCII, 80=0dB, 99=---(MIN) MV80 ? Request MV Status MV? CV FL UP CHANNEL VOLUME UP/DOWN, direct change to ***dB CVFL UP FL DOWN ---FRONT Lch CVFL DOWN FL ** **:38 to 62 by ASCII, 50=0dB CVFL 50 FR UP CVFR UP FR DOWN ---FRONT Rch CVFR DOWN
COMMAND SI SD MS PARAMETER DVD TUNER VCR-1 VCR-2 CDR/TAPE1 V.AUX NET/USB IPOD OPTICAL COAXIAL ? AUTO PCM DTS ANALOG STEREO ROCK ARENA JAZZ CLUB DOLBY H/P DVS REF. DVS WIDE ? function Select INPUT source (AUX1) (AUX2) (AUX3) (FRONT IN) Request SI Status set DIGITAL INPUT AUTO mode set DIGITAL INPUT PCM mode set DIGITAL INPUT DTS mode set force ANALOG INPUT mode SURROUND mode set Return MS Status -6- example SIDVD SITUNER SIVCR-1 SIVCR-2 SICDR/TAPE1 SIV.
EVENT(or RESPONSE) and PARAMETER list (AMP) EVENT MV PARAMETER ON STANDBY ** CV FL ** PW MU SI SD MS function POWER ON/STANDBY change MASTER VOLUME change, **:00 to 99 by ASCII 98 = +18dB(MAX) 80 = 0dB 10 = -70dB 00 = -80dB 99 = ---(MIN) CHANNEL VOLUME change, **:00 to 62 by ASCII FR ** 62 = +12dB(MAX), 38 = -12dB(MIN) SW ** 50 = 0dB ON OFF DVD TUNER VCR-1 VCR-2 CDR/TAPE1 NET/USB IPOD V.
ROCK ARENA JAZZ CLUB DOLBY H/P DVS REF.+PL2 C DVS WIDE+PL2 C The PARAMETER of MV , CV EVENT : Uses two ASCII characters. (see page 6 J) section) ※1：SD COMMAND is no RESPONSE. -8- MSROCK ARENA MSJAZZ CLUB MSDOLBY H/P MSDVS REF.
COMMAND and PARAMETER list (TUNER) COMMAND TF TP PARAMETER UP DOWN ****** (6 digits) ? UP DOWN **(PRESET No.) function TUNER Frequency UP/DOWN --- ****.** kHz at AM band (>050000 is AM.) ****.** MHz at FM band (<050000 is FM.) Return TF Status TUNER PRESET CH UP/DOWN , direct change to No.
EVENT(or RESPONSE) and PARAMETER list (TUNER) EVENT TF TP PARAMETER AN****** (6 digits) function TUNER Frequency change AN**(PRESET No.) --- ****.** kHz at AM band ****.** MHz at FM band TUNER PRESET change to No.** ANAM ANFM ANAUTO ANMANUAL TUNER BAND , MODE change ---Band set to AM ---Band set to FM ---Tuning mode set to AUTO mode ---Tuning mode set to MANUAL mode TM - 10 - example TFAN105000 (1050.00kHz at AM) TPANA1 (PRESET No.
COMMAND and PARAMETER list (timer) COMMAND TS TO TI PARAMETER Function example TSONCE A0730-A0830 DV00 ONCE @**##-@$$%% [F][N] ONCE TIMER TIME SET TSONCE P0630-P1130 TU01 @:A or P or 2(A:AM,P:PM,2:24hour by ASCII) **## :start time(**=00~23hours,##=00~59minutes by ASCII) TSONCE 21930-22030 IP00 $$%% :stop time($$=00~23hours,%%=00~59minutes by ASCII) [F]:Function (2bytes by ASCII) DV DVD PLAY TU TUNER PLAY IP iPod PLAY [N]:preset No.
EVENT(or RESPONSE) and PARAMETER list (timer) EVENT TS TO TI PARAMETER function example TSONCE A0730-A0830 DV00 ONCE @**##-@$$%% [F][N] ONCE TIMER TIME SET TSONCE P0630-P1130 TU01 @:A or P or 2(A:AM,P:PM,2:24hour by ASCII) **## :start time(**=00~23hours,##=00~59minutes by ASCII) TSONCE 21930-22030 IP00 $$%% :stop time($$=00~23hours,%%=00~59minutes by ASCII) [F]:Function (2bytes by ASCII) DV DVD PLAY TU TUNER PLAY IP iPod PLAY [N]:preset No.
COMMAND and PARAMETER list （DVD） COMMAND D@ DA DB DC DD DE DF DG DH DI DJ DK DL PARAMETER + + ? + ? + ? + ? 1 *** 2 *** DM DN ? 1 2 3 4 function start disk playback (PLAY) stop disk playback (STOP) pause to play disc (PAUSE) skip to the next track or chapter(SKIP >>|) skip to the previous track or chapter (SKIP |<<) change the playback speed (slow/search >>) change the playback speed (slow/search <<) get the playback speed information change the default settings(SETUP) display the top menu stored
DP DQ D0 D1 D2 1 2 3 4 5 ? 1 2 ? ? ? ? select the HDMI/DVI format of 480/576P select the HDMI/DVI format of 720P select the HDMI/DVI format of 1080I select the HDMI/DVI format of 1080P select the HDMI/DVI format of AUTO get the HDMI/DVI format information select the HDMI/DVI Video Setup of Y Cb Cr select the HDMI/DVI Video Setup of RGB get the HDMI/DVI Video Setup information Acquire system status Acquire software Version Acquire DVD error status - 14 - DP1 DP2 DP3 DP4 DP5 DP?
EVENT(or RESPONSE) and PARAMETER (DVD) EVENT D@ DA DB DC DD PARAMETER ** ### 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G function disk playback starts (PLAY) disk playback stops (STOP) pause to play disc (PAUSE) Change the playback track or chapter **:current group or title number(01-99 by ASCII) ###:current track or chapter number(001-999 by ASCII) change the playback speed [1] slow FWD x 1/8 [2] slow FWD x 1/6 [3] slow FWD x 1/4 [4] slow FWD x 1/2 [5] slow RVS x 1/8 [6] slow RVS x 1/6 [7] slow RVS
EVENT DE DF DG DH DI PARAMETER [1][2][3][4][5] (5 characters) function enter the setup menu (SETUP) display the top menu stored on the disc (TOP MENU) display the DVD menu stored on the disc (MENU) return to the previous menu screen (RETURN) change the audio stream channel (AUDIO) [1] current audio stream channel(1-8 by ASCII) [2] total audio stream channel (1-8 by ASCII) [3] audio format 1 Dolby Digital 2 DTS 3 MPEG 4 LPCM 5 PPCM 6 OTHER 7 DSD [4] audio channel 1 1ch 2 2ch 3 2.1ch 4 3ch 5 3.
DJ EVENT PARAMETER ** ## @ function change the subtitle language (SUBTITLE) **:current subtitle stream channel(01-32 by ASCII) ##:total subtitle stream channel(01-32 by ASCII) @:LANGUAGE CODE(by ASCCI) 1 JPN 2 ENG 3 FRA 4 DEU 5 ITA 6 ESP 7 NLD 8 CHI 9 RUS : KOR ; UNKNOWN example DJ01 03 1 DK * # DK1 3 DL ** ### change forward the angle (ANGLE) *:current angle stream channel(1-9 by ASCII) #:total angle stream channel(1-9 by ASCII) select directly group or title number **:current group or ti
EVENT D0 PARAMETER function [1]~[22] DVD player’s status information (22 characters) [1] Disc type code 1 DVD VIDEO 2 3 VCD 4 5 MP3 6 7 SACD [2] Audio format code 1 DOLBY DIGITAL 2 3 MPEG 5 PPCM 7 DSD [3] Audio Channel code 1 1ch 3 2.1ch 5 3.1ch 7 4.1ch 9 5.
EVENT PARAMETER function [6] Angle code 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 [7] Status code 0 Stand-by 1 Disc Loading 2 Disc Loading Complete 3 Tray Open 4 Tray Close A No Disc B Stop C Play D Pause E Scan Play F Slow Scan Play G Setup H Play Back Control I DVD Resume Stop J DVD Menu [8] Play mode code 1 NORMAL 2 PROGRAM 3 RANDOM 0 その他 [9][10] Group or Title number (01-99 by ASCII) [11][12][13] Track or Chapter number (001-999 by ASCII) - 19 - example
EVENT PARAMETER function example [14] Time mode 1 SINGLE ELAPSED 2 SINGLE REMAIN 3 TOTAL ELAPSED 4 TOTAL REMAIN 5 CHAPTER ELAPSED 6 CHAPTER REMAIN 7 TITLE ELAPSED 8 TITLE REMAIN 9 TRACK ELAPSED : TRACK REMAIN ; GROUP ELAPSED < GROUP REMAIN [15][16] Elapsed Time(hours,00-99 by ASCII) [17][18] Elapsed Time(minutes,00-59 by ASCII) [19][20] Elapsed Time(seconds,00-59 by ASCII) [21] HDMI Format 1 480/576P 2 720P 3 1080I 4 1080P 5 AUTO [22] DVI/HDMI Video Setup 1 HDMI Y Cb Cr 2 HDMI R G B 3 DVI 4 OFF D1 [1]~
EVENT D2 PARAMETER [1][2] [1] 1st error code [2] 2nd error code Error code No.
COMMAND and PARAMETER list (EX) COMMAND EX PARAMETER PLAYPAUSE PLAY PAUSE STOP AUTOFWD AUTORVS MANUFWD MANURVS UP DOWN LEFT RIGHT ENTER MENU RANDOM REPEAT RETURN DISPLAY NSE0 function For iPod, USB function For iPod, USB function For iPod, USB function For USB function For iPod, USB function For iPod, USB function For iPod function For iPod function For iPod, USB function For iPod, USB function For iPod, USB function For iPod, USB function For iPod, USB function For iPod function For iPod, USB function Fo
EVENT(or RESPONSE) and PARAMETER (EX) EVENT EX PARAMETER function RCV NSE0 NSE1 NSE2 NSE3 NSE4 NSE5 NSE6 NSE7 EXRCV Onscreen Display Information(mserver/iRadio) is Answered By the NSE Command.
