Super Audio CD Receiver Owner's Manual


ENGLISH
Getting Started Connections Setup Playback Setting the Timer Other Functions Troubleshooting Specifi cations
[2/u]
[MENU/SET]
ON/STANDBY
[2]
13
[8/i]
[5/ENTER]
[LINE1/LINE2]
[TUNER]
[PHONO]
[SLEEP/TIMER]
[iPod 13]
ON/STANDBY
<SOURCE>
<
2
/
5
>
1
/
3
<+/
9
>
Button located on both the main unit and the remote control
unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
Setting the Timer
n To clear the timer settings
q Press [MENU/SET].
The “TIMER” is displayed.
w Press [2/u, 8/i].
The “EVERYDAY” or ONCE” is displayed.
e While “EVERYDAY” or ”ONCE” is displayed, press <2/5> or [2]
for at least 2 seconds.
n If there is a power failure
The current time setting is canceled. Turn the power on and reset
the current time (vpage 11).
The timer settings are cleared. Set the timer again.
The tuner’s presettings may be cleared. If so, perform the
presetting procedure again.
n To check the timer settings
q Press [MENU/SET].
The “TIMER” is displayed.
w Press [2/u, 8/i].
The “EVERYDAY” or ONCE” is displayed.
e Press [MENU/SET].
The display switches as follows each time the button is pressed:
Function selection
Timer ON/OFF
n To change the timer settings
Repeat the procedure under “Setting the Timer” (vpage 20).
n To change the setting while setting the timer
Press <2/5> or [2].
Return to step 2 under “Setting the Timer” (vpage 20). Repeat
the procedure.
NOTE
During setting, you can change with <2/5> or [2] up to step 14.
Timer On time
Timer Off time
n When performing a timer setting with DENON
control dock for iPod (ASD-3N or ASD-3W)
Pause the track you want to play, and keep the power on for DENON
control dock for iPod.
Set the Timer ON/OFF
After setting with “Setting the Timer” (vpage 20), you can set
timer on/off for timer operations you want to perform.
1
Press [MENU/SET] twice or press and hold
[SLEEP/TIMER].
The current settings are displayed.
2
Press [2/u, 8/i] and select the timer for the timer
operation you want.
1_ _ /E_ _
1_ _ /Eon1on /E_ _
1on /Eon
b In “Setting the Timer” (vpage 20), in the case of reserving
Everyday Timer only, the change is as follows when you press
[2/u, 8/i].
1_ _ /E_ _ 1_ _ /Eon
b In “Setting the Timer” (vpage 20), in the case of reserving
Once Timer only, the change is as follows when you press
[2/u, 8/i].
1_ _ /E_ _
1on /E_ _
3
Press [MENU/SET] or [5/ENTER].
The timer setting is set.
4
Press ON/STANDBY to set the RCD-CX1 to Standby
mode.
The power indicator lights orange.
1.RCD-CX1E3_ENG.indd 21 2008/06/30 11:12:55