Owner`s manual

ENGLISH
,
Setting.the screen display time .•.•..•
Use this procedure to set the time until the screen
display turnSQff. .
Initialsttting: 5 seconds
Settings
7Press NEXT.
2
Press NEXT twice, then press [USER
PREF).
6Press [SAVE].
3Press [DISPLAY T/O].
4 Press NEXT.
5Press [-DISPLAY T/O+] to set the time until
the light turns
otT.
• LCD button on right side +
• LCD button on left side -
* The time can be set between 1 (MIN) and 30 (MAX).
1
Press RC SETUP for 3 seconds.
The "PROGRAM DEVICE" menu is displayed.
Operation the LCD button
2Press the LCD button for the device
(equipment) you want to operate.
* Ifthere are multiple pages, use the NEXT and BACK
button to switch screens.
1
Press DEVICE.
The "DEVICE SELECT" menu is displayed.
3Press the LCD button for the item you want
to operate.
* Ithere are multiple pages, use NEXT and BACK to switch
screens.
RC SETUP
LCD button .~= iD! =:- LCD button
I , I
_ I 1_ I
-: :- :
...... J ~...... :
BACK --+-El@G---+- NEXT
DEVICE I .. 2j
About the button names in these explanations
[ I : LCD buttons for selection items
Button name onlv:
Indicates a button on the remote control unit
5