Owner`s manual

ENGLISH
PC Application
RC-7000CI Editor function
o You can use RC-7000CI Editor for the following
operations.
• Editing RC-7000CI setting data.
• Backing up RC-7000CI setting data on the PC.
• Remote control code database downloading.
o Recommended devices and environment
required for using RC-7000CI Editor.
• Personal computer running Windows® XP Service Pack 2
operating system.
• HOD with sufficient free disk space.
• USB 2.0 connection terminal.
• Internet connection environment
26
RC-7000CI Editor installation
First connect the RC-7000CI to the personal computer using
the USB cable provided.
Use a computer connected to the Internet.
1Load the CD-ROM (RC-7000CI Editor) in
the CD-ROM drive.
2Run "RC-7000CI Editor.exe"
*Follow the installation instructions on the installation
wizard screen.
*After installation, the "Installation complete" dialog
message is displayed.
3Press "Finish" to finish installation, and
start the application.
Using RC-700OCIEditor
1
When using the application for the first
time, check the New User box, enter e-mail
address, password, etc., and press OK.
2
Run RC-7000CI Editor.exe from the CD-
ROM drive in My Computer.
RC-7000CI Editor starts up.
3Follow the wizard instructions.
Gmt
• During data upload or download using RC-7000CI Editor do
not carry out the following operations. Failure of the main
unit and personal computer may result.
• Remove the USB cable.
• Switch off the personal computer power.
• Remove batteries from main unit.