Owner`s manual
ENGLISH
\".
'1--
.~
?~
;;;
~~
~:-,
o
:::!
1
Press
RC
SETUP
for 3 seconds.
The "PROGRAM DEVICE" menu
is
displayed.
2Press
NEXT
twice, then press
[USER
PREF].
3
Press
[VERSION
INFO].
The
LCD
button
version information
is
displayed.
*
PressNEXT
twice
to
return to the settings menu.
the
ROM
page display position.
This
setting
is
made for conducting two-way
communications between the
RC-7001
RCI
(sold
separately) and compatible DENON products. The status
information of the compatible DENON product
can
be
displayed
on
the
set's
screen.
Use
this
procedure
to
set
Setting the receiver display mode
(ROM)
[FIRSn:
The
ROM
page
is
displayed at the beginning of the normal
button screen.
[LASn:
The
ROM
page
is
displayed at the end.
3Press
[ROM].
2Press
NEXT
twice, then press
[USER
PREF].
6Use
[FIRSn
and
[LAST]
to set the position
at which you want the RDM page to be
displayed.
1
Press
RC
SETUP
for 3 seconds.
The
"PROGRAM DEVICE" menu
is
displayed.
4 Press
NEXT.
5Press
[YES].
Changing node labels
Use this procedure to add labels to
RC-7001
RCls
(sold
separately) for easier distinction.
7Select the character to be input with the
second column
of
LCD
buttons,
then press
[SELECn.
*Lower
case
letters
are
input when
[CAPS)
is
displayed,
capital letters when
[lower)
is
displayed.
1
Press
RC
SETUP
for 3 seconds.
The
"PROGRAM DEVICE" menu
is
displayed.
3Press
[EDIT
LABEL].
4
Press
NEXT
twice.
The
RC-7001
RCI's
(sold separately) node number
is
displayed.
6At the "Edit
Text"
screen, use the first
column of
LCD
buttons
to
select the position
of
the character to be edited.
2Press
NEXT
twice, then press
[NETWORK].
5Select the node number to be changed, then
press
NEXT.
The
edit screen for the selected node appears.
8Press
[SAVE].
9Press
NEXT.
* When
[NO)
is
pressed, the setting menu reappears.
To
continue, press
[YES]
*
Press
NEXT
to return to the settings menu.
25