Owner`s manual

ENGLISH
LCD button
RC SETUP
::>
~~
v
2f ;2,
::..} ~ ~
l
=iDi= -LCD button
-, ,
, ,
I 1_ I
-: !- :
-) \ ...... :
"
G-+- NEXT
,
Operational: .. et '.
Th~ se~ings are' returned to as they were. upon
purchase.
..
1
Press RC SETUP for 3 seconds.
The "PROGRAM DEVICE" menu is displayed.
2 Press NEXT, then press [RESET/LOCK].
3 Press [OP RESET].
4 Press NEXT.
5 Press [YES].
6
Press NEXT.
"PLEASE WAIT" is displayed.
7
Press NEXT.
The settings are returned to as they were upon purchase
((j"page 3).
.
User reset .
This procedure deletes the macro settings added by
the user and the remote .control codes that
have been
learned..It
dOes not delete added devices.
1
Press HC SETUP for 3 seconds.
The "PROGRAM DEVICE" menu is displayed.
2 Press NEXT, then press [RESET/lOCK].
3 Press [USER RES En.
4 Press NEXT.
5 Press [YES].
6
Press NEXT.
"PLEASE WAIT" is displayed and the setting is reset.
7
Press NEXT.
The settings menu reappears.
About the button names in these explanations
[ I : LCD buttons for selection items
Button name onlv:
Indicates a button on the remote control unit
20