Owner`s manual
ENGLISH
LCD
button
~~
,Oi
~;
LCD
button
~:
:
....
:
, \ '
..
,,'
...... I
~NEXT
RC
SETUP
SiI
About the button names
in
these explanations
[ I :
LCD
buttons for selection items
Button
name
only:
Indicates a button
on
the remote control unit
14
Setting the device display mode
Use this procedure to select the way
in
which the devices
(equipment)
are
displayed.
1
Press
RC
SETUP
for 3 seconds.
The
"PROGRAM DEVICE" menu
is
displayed.
2 Press
NEXT,
then press
[EDIT
DEVICE].
3 Press
[DISPLAY
MODE].
4 Press
NEXT.
5 At the "Select Device" screen, press the
LCD
button
for the device whose display mode
you want to change.
6 Press
[COLUMN
MODE]
or
[ROW
MODE].
[COLUMN
MODE]
:
The devices are displayed
two
per row.
[ROWMODEI:
The devices are displayed one per row.
7
Press
[YES].
The display mode
is
set.
* When
[NO]
is
pressed, the setting menu reappears.
To
continue, press
[YES).
am.
The display mode
is
not set
in
the device. Set with respect to
the
LCD
button
position.
Setting the remote control code transmission
mode
(In
the
case
of IR)
1
Press
RC
SETUP
for 3 seconds.
The
"PROGRAM DEVICE" menu
is
displayed.
2 Press
NEXT,
then press
[EDIT
DEVICE].
3 Press
NEXT.
4 Press
[IRIRFl.
5Press
NEXT.
6
At the "Select Device" screen, press the
LCD
button
for the device whose transmission
mode you want to change.
7Press
NEXT.
8Press
[I
R].
[lRI:
The codes
are
sent
as
infrared signals.
9
Press
[YES].
The transmission mode
is
set.
* When
[NO]
is
pressed, the setting menu reappears.
To
continue, press
[YES).