Owner`s manual

ENGLISH
Editing device$
. Devices registered in the rembte control unit can be
moved, copied ana inserted.
7At the "Target Device" screen, press the
LCD button for the target destination or the
device (equipment) to be substituted.
Moving or swapping devices
4 Press NEXT.
1
Press HC SETUP for 3 seconds.
The "PROGRAM DEVICE" menu is displayed,
2 Press NEXT, then press [EDIT DEVICE].
3 Press [MOVE/SWAP].
6 Press NEXT.
5 At the "Source Device" screen, press the
LCD button for the device (equipment) you
want to move.
8
Press [YES].
The device is moved,
* Press NEXT to return to the setting menu,
Deleting pages
7
Press [YES].
The page is delete,
2 Press NEXT, then press [EDIT PAGE].
1
Press HC SETUP for 3 seconds.
The "PROGRAM DEVICE" menu is displayed,
4 Press NEXT.
3 Press [DELETE PAGE].
5
Press [MAIN] to delete a page from the
device select menu,
[DEVICE] to delete a
device (equipment) page.
6
Select the page to be deleted using NEXT
and BACK, then press [SELECT PAGE].
BACK~" s---;- NEXT
LCD button ;~ 10
1
~ LCD button
~! :, :
I , '
;....... .. ... I
RC SETUP ---.:_~
About the button names in these explanations
: LCD buttons for selection items
Button name only:
Indicates a button on the remote control unit
;t)
: .. /'
* When [NO] is pressed, the setting menu reappears, To
continue, press [YES],
12