Owner`s manual

ManualsBrandsDenon ManualsUniversal RemoteRC-7000CI - Remote Control - Infrared/radio

DENON

REMOTE CONTROL

UNIT

RC-7000CI

OWNER'S MANUAL

~milBJJe

•

d)~llL

(fll

t::.

t::.'~,

ets

tilc

.:s

~'2l1

*go

•

~'1~fflO)M(;:

o)If9.t&~BJ3~7t

d)~7C<ffo).:s;Z,

~'1~ffl

t':'C5l

•

d)~7C<ffl=t6

t::'1~(d:1~8

d)1~l::=j1:J~

tJets

*gO)-C\

£\g1~1¥

GT <

t':C5l

• 8

*~g

9:f§gl)'9l-0)~~o)£!lIID&$I.8jj~(cl:5~110)CD

ROMCJj)(uG

)*cj

• Instructions

languages other than English and

Japanese

are

included

the CD-ROM.

• Die Bedienungsanleitung

anderen Sprachen

als

Englisch und Japanisch finden

Sie

auf der CD-ROM.

• Les instructions

langues autres que

japonais et

I'anglais sont inclus dans

CD-ROM.

• Istruzioni

lingue diverse dall'inglese e

dal

giapponese

sono incluse nel CD-ROM.

•

Las

instrucciones

idiomas diferentes a Ingles y

Japones

incluyen

CD-ROM.

• Instructies

andere talen

dan

het Engels

Japans

ziJn

terug

vinden

de CD-ROM

• Anvisningar

andra sprak

engelska

och

japanska

flnns

den medfblJande CD-ROM-skivan.

Summary of content (38 pages)

PAGE 1
DENON REMOTE CONTROL UNIT RC-7000CI OWNER'S MANUAL ~milBJJe • 8 *~g C. 9:f§gl)'9l-0)~~o)£!lIID&$I.8jj~(cl:5~110)CD * • d)~llL (fll t::. t::.'~, ets l) til c .:s ~'2l1 go • ~'1~fflO)M(;: ~ o)If9.t&~BJ3~7t J:
PAGE 2
IC Information (For Canadian customers) FCC Information (For US customers) 1. DEVICE RC-7000CIIC: 6963A-RC7000 This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. APPAREIL RC-7000CIIC: 6963A-RC7000 Cet appareil est conforme ala norme CNR-210 du Canada.
PAGE 3
A NOTE ABOUT RECYCLING: ACERCA DEL RECICLAJE: This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning battery disposal.
PAGE 4
• DECLARATION OF CONFORMITY Hereby, D&M Holdings Inc., Denon Brand Company declares that this product RC-7000CI is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, in conformity with the following standards; EN300328, EN301489-01 and EN301489-17 The declaration of conformity may be consulted to our European representative, DENON EUROPE. • OSEREINSTIMMUNGSERKLARUNG Hiermit erklart D&M Holdings Inc.
PAGE 5
ENGLISH Deleting signals registered with the learning function·· ·18 Deleting signals registered with the macro function 19 Deleting favorites · 19 Deleting the registered punch-thru function · ·.. ·19 Operational reset···· .. ·.. ····· .. ··· .. ······· .. ·· .. ·········· ·· .. ··· .. ·· 20 User reset········ .. ·.. ·· .. ···· .. ·· .. ·.. ·· .. ····· .. ······ .. ···· .. ·· .. ·· ·.. ·· 20 Lock function 21 Getting Started Thank you for purchasing this DENON product. To ensure proper operation.
PAGE 6
ENGLISH Operating range of the remote control unit Part names and functions For buttons not explained here, see the page indicated in parentheses ( ). Point the remote control unit at the remote sensor when operating it. 0SETUP/MENUbutton «D Cursor buttons (.t,. \7
PAGE 7
ENGLISH Operation When batteries are loaded for the first time Initial display screen Make the setting described below. The initial display settings are shown on the display below. 1 [Screen 1] To use to operate an AV amplifier (AV receiver), press [Denon1]. * [Denon2] is a function for system expansion in the future. Introduction Normally select [Denon1].
PAGE 8
ENGLISH Settings menu map o BASIC SETUP (B2Fpage 7, 9) o • BRAND SET • CODE SEARCH • ADD / REDO • DELETE • CONFIGURE · FAV DEVICE · FAV IR DELAY · TOTAL DIGITS · CHANNEL KEY • ADD / REDO • DELETE • EDIT DELAY • ADD PAGE • DELETE PAGE o EDIT DEVICE (B2Fpage 11, 13) • MOVE/SWAP • MOVEIINSERT • COpy • ERASE • DISPLAY MODE ·IR/RF o EDIT TEXT (B2Fpage 15,18) • DEVICE NAME • KEY NAME (B2Fpage 11,19) • ADD · CHANNEL TUNE · TRANSPORTS · VOLUME CONT. · MENU NAVIG.
PAGE 9
ENGLISH LCD button iD! .~= _ I , Operation the LCD button =:- LCD button I 1_ ...... J :~......- -: I I : : BACK --+-El@G---+- NEXT DEVICE I ..2j 1 2 * 3 * RC SETUP Settings Press DEVICE. Setting.the screen display time The "DEVICE SELECT" menu is displayed. Use this procedure to set the time until the screen display turnSQff. . , Initialsttting: 5 seconds Press the LCD button for the device (equipment) you want to operate.
PAGE 10
ENGLISH Seltir'f91;l)e b'~light on time Adjusting the contrast turns off; . ", Set this if the characters on the screen are hard to see. Initia' setting: Level 5 Use t~isp'rocedureto set the time. until the backlight LCD button 'nitia'lllItint~ 5 secQnds 1 Press RC SETUP for 3 seconds. ~~~ ~~~ RC SETUP 1 Press RC SETUP for 3 seconds. The "PROGRAM DEVICE" menu is displayed. 2 PREF]. NEXT 3 [LIGHT T/O]. Press 2 PREF]. NEXT 3 [CONTRAST]. 4 Press NEXT. 4 Press NEXT.
PAGE 11
ENGLISH Various settings 8 Use ~, -, II, ~, ~, ~, ~, VOL+ - to check whether the device to be added operates. [YES] Operates Using the preset memory function The remote control unit can be preset to operate devices of various brands. 1 2 3 4 5 • The IR/RF selection screen appears. Does not operate Press RC SETUP for 3 seconds. • The screen switches to the next code. Find the code that operates and set it by pressing [YES]. The "PROGRAM DEVICE" menu is displayed. Press [BASIC SETUP].
PAGE 12
ENGLISH 7 LCD button LCD button 8 Place the remote control units with their signal transmitters facing each other, press NEXT, then immediately press the button on the remote control unit you want to register. "Success!" is displayed if the code was learned successfully. To register other buttons, press NEXT. * Repeat steps 6 to 8. 9 RC SETUP 5iI Press [EXITI to exit the learning mode. * Press [EDIn if you want to change the button name.
PAGE 13
ENGLISH 8 9 Press RC SETUP. The registration menu is displayed. Press [SAVE] to register the set macro. [TEST] : Press this to send the registered macro to check it. [-DELAY +]: Use these to set the transmission interval. This can be set to between "0.05(MINj" and "60(MAX)': (Initial setting: 0.25 seconds) [CANCEL ENTRY] : Press this to cancel the last code registered and return to the registration mode. [START OVER] : Press this to start over from the beginning. 1 {)press [EXln to end the setting.
PAGE 14
ENGLISH Registering favorites Favorites settings Use this function to register your favorite channel numbers so they can be operated with a single button. LCD button ~ RC SETUP I NEXT ENTER ---:_~ 1 Press RC SETUP for 3 seconds. The "PROGRAM DEVICE" menu is displayed. 2 Press [FAVORITES]. 3 Press [CONFIGURE]. 4 Press NEXT twice. 5 At the "CONFIGURE About the button names in these explanations FAV" screen, press [FAV DEVICE] : Press this to select the device to be stored in the favorites.
PAGE 15
ENGLISH 8 Input the number (channel) you want to 4 Press NEXT. register. 5 Atbutton the "Punch Thru" screen, press the LCD 9 Press NEXT. for the group you want to set. The functions for which punch thru can be assigned in units of groups are as shown on the table below. 1(}press [SAVE] to register the favorite. s' ,.E CHANNEL TUNE * Press [EDIT] if you want to change the button name. 11 Press Press [EXIT] to end the registration. [ADD] to continue registering.
PAGE 16
ENGLISH Deleting pages ;~101 ~ LCD button ~! ;....... I BACK~" LCD button :, : , .. ... 1 2 Press NEXT, then press [EDIT PAGE]. Moving or swapping devices ' I s---;- NEXT 3 4 5 RC SETUP Press HC SETUP for 3 seconds. The "PROGRAM DEVICE" menu is displayed, Editing device$ . Devices registered in the rembte control unit can be moved, copied ana inserted. ---.:_~ Press [DELETE PAGE]. Press NEXT.
PAGE 17
ENGLISH Inserting devices Copying devices Deleting devices 1 1 1 2 3 4 5 6 The "PROGRAM DEVICE" menu is displayed. Press NEXT, then press [EDIT DEVICE]. Press [MOVE/lNSERn. Press NEXT. At the "Source Device" screen, press the LCD button for the device you want to move. Press NEXT. 7 8 Press RC SETUP for 3 seconds. At the "Target Device" screen, press the LCD button in the place you want to insert. 2 '* When [NO) is pressed, the setting menu reappears. To continue, press [YES).
PAGE 18
ENGLISH LCD button ,Oi~; ~~ Setting the device display mode Use this procedure to select the way in which the devices (equipment) are displayed. LCD button :.... :' ~:, \ .. ,,' ...... I ~NEXT 1 2 3 Press RC SETUP for 3 seconds. The "PROGRAM DEVICE" menu is displayed. Press NEXT, then press [EDIT DEVICE]. Press [DISPLAY MODE]. 4 Press NEXT. 5 button RC SETUP SiI At the "Select Device" screen, press the LCD for the device whose display mode you want to change.
PAGE 19
ENGLISH Setting the remote control code transmission mode (In the case of RF) 1 Press HC SETUP for 3 seconds. Editing buttons mode is set. * When [NO) is pressed, the setting menu reappears. To The "PROGRAM DEVICE" menu is displayed. 2 Press NEXT, then press [EDIT DEVICE]. 3 Press NEXT•. 4 5 1~~~~~~n continue, press (YES]. Press lIRjHF]. Press NEXT, then press [EDIT TEXT]. Press NEXT. 3 Press [DEVICE NAME].
PAGE 20
ENGLISH LCD button ~D ~ ~) -- - E3--+- LCD button NEXT Inserting buttons Copying buttons 1 1 Press RC SETUP for 3 seconds. 2 Press NEXT, then press [EDIT FUNC]. Press RC SETUP for 3 seconds. The "PROGRAM DEVICE" menu is displayed. 2 Press NEXT, then press [EDIT FUNC]. 3 Press [COPY]. 3 Press [MOVE/INSERTI. 4 Press NEXT. 4 Press NEXT.
PAGE 21
ENGLISH Deleting buttons Setting the button display mode Adding buttons 1 Use this procedure to select the way in which the buttons are displayed. When new buttons are added, it is possible to select and add new functions. 1 1 2 3 4 2 3 Press RC SETUP for 3 seconds. The "PROGRAM DEVICE" menu is displayed. Press NEXT, then press [EDIT FUNC]. Press [ERASE]. 4 NEXT. 5 LCD button Press At the "Source Device" screen, press the for the device of the button you want to delete.
PAGE 22
ENGLISH Changing the button name 1 LCD button Press RC SETUP for 3 seconds. The "PROGRAM DEVICE" menu is displayed, 2 Press NEXT, then press [EDIT TEm. 3 [KEY NAME]. 4 button Press At the "Select Device" screen, press the LCD for the device whose button name you want to change. RC SETUP ~ ~ -', '" r :~ About the button names in these explanations 8 Button name only: Indica18s a button on the remote control unit [SELECn.
PAGE 23
ENGLISH Deleting signals registered with the macro function lib D....el....et....in~g....fa....v....o....rit__es 1 .... 4 Press NEXT twice. 1 2 3 4 5 At the "Source Device" screen, press the LCD button for the device (equipment) whose macro you want to delete. 5 LCD button 6 7 At the "Select Key" screen, press the LCD button for the macro you want to delete. 1 2 3 Press RC SETUP for 3 seconds. The "PROGRAM DEVICE" menu is displayed. Press [MACROS]. Press [DELETE]. To delete, press [yES].
PAGE 24
ENGLISH , LCD button =iDi= l -,, I -: -) " Operational:. .et '. Th~ se~ings are' returned purchase. -LCD button !-...... :: 1_ I \ NEXT RC SETUP ::> ~~ v 2f ;2, ~ ~ About the button names in these explanations [ I : LCD buttons for selection items Button name onlv: Indicates a button on the remote control unit 20 User reset to as they were. upon .. ,, G-+- ::..} . 1 Press RC SETUP for 3 seconds. The "PROGRAM DEVICE" menu is displayed. 1 Press HC SETUP for 3 seconds.
PAGE 25
ENGLISH Lock function When loded, possible. Unlock function device 1 RC SETUP 2 NEXT, 3 [LOCK]. 4 NEXT 5 button Press {equipment} editing is not for 3 seconds. The "PROGRAM DEVICE" menu is displayed. Press then press [RESET/LOCK]. Press Press 6 twice. At the "Select Device" screen, press the LCD for the device (equipment) you want to lock. Press [YES]. * When [NO) is pressed, the setting menu reappears. To continue, press [YES].
PAGE 26
ENGLISH ~ Network function This functions uses the RC-7001RCI (sold separately). When a wireless (RF) network is established using the RC-7001 RCI (sold separately), the RC-7001 RCI is called a node. An individual node number is registered for each RC-7001 RCI unit. When registering devices with the RC-7001 RCI.
PAGE 27
, ENGLISH Operations using nodes Adding nodes (1) LCD button Use this procedure to register a node number and add an RC-7001 RCI (sold separatelyl to the network. 12 3 4 RC SETUP ----;---~ 5 6 Press RC SETUP for 3 seconds. The "PROGRAM DEVICE" menu is displayed. Press NEXT twice, then press [NETWORK]. Press [ADD NODES]. Press NEXT. To add the remote control unit to the network, press [REMOTE]. Press RESET/CONFIG on the RC-7001RCI (sold separately) for about 1 second. The indicator flashes green.
PAGE 28
ENGLISH 'D'~ I_ l,: , LCD button -: I I - I I _I ~.! , :, , LCD button ., Viewing nodes Use this procedure to delete RC-7001 Rei (sold separately) units by specifying the node number from the current netWork, Use this procedure to search for and display a list of RC7001 RCls (sold separately) registered in the network, 1 _ i G---i- RC SETUP Deleting nodes NEXT ----;.---J~ 1 2 3 4 5 6 > "0 '1:, ;' :.:::: :;';' ... ,.. c' ,. Press RC SETUP for 3 seconds.
PAGE 29
ENGLISH Changing node labels Setting the receiver display mode Use this procedure to add labels to RC-7001 RCls (sold separately) for easier distinction. (ROM) 1 2 3 Press RC SETUP for 3 seconds. The "PROGRAM DEVICE" menu is displayed. Press NEXT twice, then press [NETWORK]. This setting is made for conducting two-way communications between the RC-7001 RCI (sold separately) and compatible DENON products. The status information of the compatible DENON product can be displayed on the set's screen.
PAGE 30
ENGLISH RC-7000CI Editor installation PC Application RC-7000CI Editor function o You can use RC-7000CI Editor for the following operations. • Editing RC-7000CI setting data. • Backing up RC-7000CI setting data on the PC. • Remote control code database downloading. o Recommended devices and environment required for using RC-7000CI Editor. • Personal computer running Windows® XP Service Pack 2 operating system. • HOD with sufficient free disk space. • USB 2.0 connection terminal.
PAGE 31
ENGLISH Troubleshooting 1. If a problem should arise, first check the following: 2. Is the set being operated as described in the operating instructions? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase. Symptom Set does not work properly when remote control unit operated. -... Specifications Cause • Batteries are worn.
PAGE 32
DENON~' LIMITED WARRANTY (USA) PAGE USA (ENGLISH) CANADA (ENGLISH) CANADA (FRENCH) 2 3 4 USA DENON ELECTRONICS (USA), LLC (a D&M Holdings Company) 100 Corporate Drive Mahwah, NJ 07430-2041 18001 497-8921 18881 544-8434 Fax DENON REGIONAL SUPER SERVICE CENTERS (Repair only-No parts orders please) PYRAMID AUDIO UNITED RADIO SERVICE AUDIO SERVICES 305 E. Braker Lane Austin, TX 78753-2746 (512) 458-8292 (512) 453-4542 Fax 5717 Enterprise Parkway E.
PAGE 33
.... ·'I'~·"" ·'11"·.....'11'· .....,"'........'"'.......,"'........"...... ·,""·....·.1"··....·.11'··.... ·'1"· ....'11'··... ·,11" ...··,,,'··...·.111'··.... ·,II~·"" .,"h..... ·."~.·....·.'"'.·.... ·'11'··.....,11'··.....1I"·.... ·.jU··... '0l1'·· .... ·.11~·.....'11'·'....·.11'··.....11I...... ,or~.........II'........""....... ~ , ; This warranty win be honored only in the U.S.A : ~ • ~ U'.
PAGE 34
r- I' II "'"" ~I' ,III' IIII IIII ·.. I~·, ,·11I"· ··II'··. .·.IIl"· ·.I."· ·~ · ·~rl ..· ·.I,I"· ,1'·· 'II'·· ·ofI'·· ·.."'··. .·..'I·· · ·~· ..U..·. .·.,II..·. .·" , , ,. 11, 111 11'. , This warranty will be honored only in Canada. , ;• i ;• ; • • • ·t LIMITED WARRANTY ~ ~ Length of Non-Transferable Warranty ¥ This warr..mty on your DEN ON produci which is distribuled and warranted by D&M CANADA INC.
PAGE 35
Cette garantie ne sera honoree qu':.; Canada. i - d CETTE Vous devez inc lure egalement vos nom, adresse. numero de telephone de jour, numeros de modele et de serie du produit et une descriplion GARA~~;:I:~~::~~~::'E:~n~;~e;~~DC::Av:/Oindre un disque que I'appareil n'a pu lire pour lest 11 vous sera retoume avec I'article ason fonctionncmcnt.
PAGE 36
DENON SERVICE NETWORK • • • • • • • • Please consult the outlet where the equipment was purchased. Bitte wenden Sie sich an den Handler, bei dem Sie das Produkt gekaufthaben. SVP veuillez consulter votre revendeur. Neemt u alstublieft contact op met het verkooppuntwaar u de apparatuur heeft gekocht. Por favor con suite en el establecimiento donde compr6 el equipo. Vanligen ta kontakt med butiken dar du ktipt utrustningen. Rivolgetevi al rivenditore che vi ha venduto "apparecchio.
PAGE 37
T 104-0033 ~5l:3BqJ~~iiJ 111-21-2 ¥fill!Jll?- 14F TEL: 045-670-5555 [.~.~IUSlllllljlO)t.Wj; ~1-g8~rsJ 9. 30 ~ ?1::as1.l'l1 L)T(ct ~j(0) URL T·:t'::£i§;2T'~*~o http://denon.jp/info/info02.html ~8 a:>t.:/lt.> 1:~2A L., T c!'3L) T < to::. ~ L'0 .~~( F.I ) B DENON TOKYO, JAPAN www.denon.com Denon Brand Company, D&M Holdings Inc.