Owner`s manual

<Gateway>
<Primary DNS>
<Second DNS>
<Proxy>
NE'IWORK SETUP of POA-3012CI
>Procedure of Network Setup mode.
(1) Press MENU button and select "system set up" with rotary encoder, then System Setup Menu appears on FL-display.
(2)Select "Network Setup> Detail" .
(3)Set parameters described below.
<DHCP> "ON"---Use this setting when DHCP server is on the local network.
"OFF"---Use this setting when DHCP server is not on the local network.
<IP Address> When <DHCP> sets "OFF", please set IP address.
When <DHCP> sets "ON", you can confirm the IP address that is set by server.
<Subnet Mask> When <DHCP> sets "OFF", please set Subnet Mask.
When <DHCP> sets "ON", you can confirm the Subnet Mask that is set by server.
Set the address of Gateway when Gateway is on the local network.
Do not set this parameter when Gateway is not on the local network.
Do not set this parameter.
Do not set this parameter.
Set this parameter "OFF".
<Network
Option: Standby Mode Power Saving>
(1) Press MENU button and select "power configuration", then Menu appears on FL-display.
(2)Set parameters described below.
"ON LINE"---Use this setting when using the POA-3012CI connected in a network.
"MASTER TRIGGER" or "POWER BUTTON"--- Use this setting when not using the POA-3012CI connected in a network.
This setting is reducing the power consumption in the standby mode.
- 3 -