Owner`s manual
Getting Started Connections Operation
Troubleshooting
ENGLISH
Specifications
n Proxy settings
Make this setting when connecting to the Internet via a proxy server.
*Network Setup
Proxy
*Proxy
ON
*Proxy
Address
*Proxy
Proxy Ad dress
*Proxy A ddress
000.000. 000.000
*Proxy
Port
*Proxy P ort
00000
q Select menu “Network Setup” – “Network Setup” – “Proxy” and
press the SELECT/ENTER knob.
w
Turn the SELECT/ENTER knob to set “Proxy” to “ON” and press
the SELECT/ENTER knob.
The proxy server is enabled.
e
Turn the SELECT/ENTER knob to select the proxy server input
method, and then press the i button.
[Selectable items]
Address
: Select when inputting by address.
Name
: Select when inputting by domain name.
[Characters that can be input]
A ~ Z
a ~ z
0 ~ 9
! # % & ’ ( )
*
+ , - . / : ; = ˉ ? @ [ \ ] (space)
w Set “ON”.
q Select “Proxy”.
r Input the
address
or domain
name.
e Selecting the
input method
Example) Address
y Input the port
number.
t Select “Port”.
r Use the following buttons to input the proxy server address or
domain name and press the SELECT/ENTER knob.
b Button functions when entering address
SELECT/ENTER knob : Turn ············Select
Press ··········Confirm
u button : Cursor to right
i button : Cursor to left
ZONE 6 button : Setting during address entry
ZONE 5 button : Cancel entry
DISPLAY button : Character insert/delete/overwrite
Cursor 1 : Character insert
Cursor0 : delete
Cursor2 : overwrite
When “Address” is selected in step e : Input the address
When “Name” is selected in step e : Input the domain name
t Turn the SELECT/ENTER knob to select the “Port” and press
SELECT/ENTER knob.
y
Use the above buttons to input the proxy server port number and
press the SELECT/ENTER knob.
u
Press the SELECT/ENTER knob.
Setup is complete.
Option Setup
Make various other settings.
F Menu tree F
Main Setup
Option Setup
a Maintenance
s Firmware Update
a
Maintenance
This sets the function for maintenance by a DENON
serviceperson or installer. (For professional use only.)
This function allows a DENON serviceperson or installer to check the
POA-3012CI’s status and make settings via the Internet.
NOTE
Only use this function if so instructed by a DENON serviceperson or
installer.
NOTE
• Connection to the network and specific settings are required to
update the firmware. For details, see page 8, 15.
• Do not turn off the power until updating is completed.
• Normally there is no need to use this function, aside from the cases
described below.
⋅ The Firmware Update function is only used for updating the
firmware (free or for a charge) via the Internet, for example for the
purpose of adding functions to the POA-3012CI in the future.
⋅ Information regarding the Firmware Update function will be
announced on the DENON web site each time related plans are
defined.
⋅ A broadband connection to the Internet is required to use this
function (v page 8).
⋅ Even with a broadband connection to the Internet, approximately
13 min is required for the updating procedure to be completed.
Once updating starts, normal operations on the POA-3012CI cannot
be performed until updating is completed.
Furthermore, updating the firmware may reset the backup data for
the parameters, etc., set for the POA-3012CI.
s
Firmware Update
Update the firmware of the multi channel power amplifier.
b If the display reads as shown below, check the settings and network
environment, then update again.
Update Check
You can check for firmware updates. You can also check approximately
how long it will take to complete an update.
Update Start
Execute the update process.
When updating starts, the power indicator lights red. “Updating
zzz” is shown on the display during updating. Once updating is
completed, “Updatingcomplete” is displayed.
“Latest firmware” is displayed when the firmware is the latest
version.
Setup
Display Description
Updating failed Updating failed.
Login failed Failure to log into server.
Server is busy Server is busy. Wait a while then try again.
Connection fail Failure connecting to server.
1.POA-3012CI_ENG.indd 19 2008/04/08 9:25:50