MULTI CHANNEL POWER AMPLIFIER POA-3012CI Owner’s Manual Bedienungsanleitung 1.POA-3012CI_ENG.
ENGLISH DEUTSCH n SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DEUTSCH n NOTE ON USE / HINWEISE ZUM GEBRAUCH ENGLISH n For Europe model DECLARATION OF CONFORMITY We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. Following the provisions of 2006/95/EC and 2004/108/EC Directive. ÜBEREINSTIMMUNGSERKLÄRUNG • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack.
ENGLISH Getting Started Contents Connections Getting Started Accessories·······················································································1 Cautions on Handling······································································1 Cautions on Installation··································································1 Part Names and Functions······························································2 Front Panel·································································
ENGLISH Getting Started Part Names and Functions For buttons not explained here, see the page indicated in parentheses ( ).
ENGLISH Getting Started Rear Panel Q0 o i u y t Connections Setup Operation Troubleshooting Specifications q w q ETHERNET connector···································· (8) w RS-232C connector········································ (9) e Speaker terminals (SPEAKER SYSTEMS)···································· (5) r AC inlet (AC IN)············································ (10) t AUDIO INPUT connectors····························· (7) e r y TRIGGER IN jacks······································
ENGLISH Preparations n Input Setting Audio cables Audio input connections (Black) Pin-plug cable Businput/output connections (stereo) (Black) L L (Black) R R Stereo pin-plug cable Select the input terminal to use. Network connections Troubleshooting Each Zone input connectors or BUS input connectors. Operation • Do not plug in the power cord until all connections have been completed. • When making connections, also refer to the operating instructions of the other components.
ENGLISH Getting Started Speaker Connections Connection Method for BRIDGED Output Connection Method When Outputting 2 Channels From One ZONE Connections CH 1 CH 2 CH 3 CH 4 CH 9 CH 10 CH 11 CH 12 • In BRIDGED mode, one channel is output from one ZONE. • To set BRIDGED mode, select “BRIDGED” as the “OPERATION MODE” on the “Main Setup” menu. • When BRIDGED out putting a signal input to the AUDIO INPUT terminal, input to an even-numbered input terminal.
ENGLISH Carefully check the channel numbers and + (red) and – (black) polarities on the speakers being connected to the POA-3012CI, and be sure to interconnect the channels and polarities correctly. Insert the speaker cable’s core wire to the hilt into the speaker terminal. Turn the speaker terminal clockwise to tighten it. When using a banana plug (for North America model) Specifications Tighten the speaker terminal firmly before inserting the banana plug.
ENGLISH Getting Started Input Connections BUS INPUT Connections Connections • To play signals input to the BUS INPUT terminal, select the channel using “INPUT SELECT” on the “Main Setup” menu. • When “BUS L+R” is used, signals input to BUS INPUT L and R are mixed and output as monaural.
ENGLISH n Broadband Internet Connection A broadband line connection to the Internet is required in order to use the POA-3012CI’s firmware update. ETHERNET Connections n Modem Computer Internet n Router LAN port/ Ethernet connector n Ethernet Cable (CAT-5 or greater recommended) Specifications • The POA-3012CI does not come with an Ethernet cable. • Some flat type Ethernet cables are easily affected by noise. We recommend using a normal type cable.
ENGLISH Getting Started External Controller RS-232C connector Connections This connector is used for an external controller. Setup Operation b If you wish to control the POA-3012CI from an external controller using the RS-232C connector, perform the operation below beforehand. q Turn the POA-3012CI’s power. w Turn off the POA-3012CI’s power from the external controller. e Check that the POA-3012CI is in the standby mode.
ENGLISH Wait until all connections have been completed before connecting the power cord. n To select the item to be set Setup Turn the SELECT/ENTER knob until the item you want to set appears. n To enable lower level menu items to be displayed u/RETURN SETUP i Press the SELECT/ENTER knob or the i button. n To return to higher level menu items Press the u/RETURN button. Setup n To confirm selected item Press the SELECT/ENTER knob.
ENGLISH Getting Started Menu Map NORMAL MODE Connections Main Setup (vpage 13) CH 1 CH 2 CH 3 a VOLUME CONTROL (vpage 13) 0.0dB –90.0dB – – –.–dB CH 12 BRIDGED MODE CH 2 BTL CH 4 BTL CH 6 BTL BTL 0.0dB BTL –90.0dB BTL – – –.–dB CH 12 BTL Setup CH 1 CH 2 CH 3 Operation s INPUT SELECT (vpage 13) AUX.
ENGLISH Getting Started Main Setup Network Setup aN etwork Information (vpage 15) DHCP Connections (vpage 15) IP Address Mac Address Setup Operation DHCP OFF ON IP Address Subnet Mask Default Gateway Primary DNS Secondary DNS Address Name Option Setup (vpage 16) Specifications Proxy ON OFF Troubleshooting s Network Setup (vpage 15) Proxy Address Port Proxy Name Port a Maintenance (vpage 16) s Firmware Update (vpage 16) 12 1.POA-3012CI_ENG.
ENGLISH Getting Started Main Setup F Menu tree F Main Setup a VOLUME CONTROL Connections s INPUT SELECT d LOW CUT FILTER s INPUT SELECT f OPERATION MODE Sets the input terminal for each channel. Sets the output method for channels in each ZONE. [Selectable Channels] [Selectable Channels] For details of the channels which can be set in each mode, see GSelectable ChannelsH in “ a VOLUME CONTROL”. Sets each of the following channel pairs.
ENGLISH h DIMMER MODE Sets the operating specifications for the power amplifiers of each ZONE. Adjust display brightness of the POA-3012CI. Getting Started g ZONE TRIGGER ON MODE [Selectable items] For details of the channels which can be set in each mode, see GSelectable ChannelsH in “ f OPERATION MODE” (vpage 13). [Selectable items] : Normal display brightness. Dim : Reduced display brightness. Dark : Very low display brightness. OFF : Display is off unless controls are operated.
ENGLISH Getting Started Network Setup Make network settings. s Network Setup Make settings for wired LAN. Wired LAN settings F Menu tree F Connections Main Setup Use this procedure to configure the Wired LAN settings.
ENGLISH Make this setting when connecting to the Internet via a proxy server. w Set “ON”. *Proxy ON *Proxy Proxy Address t Turn the SELECT/ENTER knob to select the “Port” and press SELECT/ENTER knob. Execute the update process. When updating starts, the power indicator lights red. “Updating zzz” is shown on the display during updating. Once updating is completed, “Updatingcomplete” is displayed. “Latest firmware” is displayed when the firmware is the latest version.
ENGLISH Getting Started Check the Status of Each Channel 1 Operation Connections ZONE operation mode indicators SELECT/ENTER Press the DISPLAY button. b Zone status is indicated on the bottom line of the display. b Turn the SELECT/ENTER knob to change the display as follows. Channel No. & INPUT Line ZONE T.ON MODE Setup 2 VOLUME CONTROL level LOW CUT FILTER Press the DISPLAY button again. Operation b System status is indicated on the bottom line of the display.
ENGLISH Operate. GExample: 3H Warning and Protection Data Screen To use the web control function, set the menu “Main Setup”– “POWER CONFIGURATION” – “ON LINE” (vpage 14). GExample: 1H Channel Setup Screen Click when you update to the latest information (z) NOTE GExample: 4H Audio Signal and Trigger Input Screen Displays On/Off of Audio signal and Trigger In. No setting item. Enter figures or click “< ” or “>” to make the setting, and then click “Set”.
ENGLISH Getting Started Troubleshooting Specifications Connections Setup Check the following before assuming there is a problem with the set: 1. Are all connections proper? 2. Is the set being operated as described in the owner’s manual? 3. Are the speakers and input components being operated properly? If the set does not seem to be operating properly, check the points listed below. If these points do not apply, the set may be damaged. Turn off the power immediately and contact your store of purchase.
20 1.POA-3012CI_ENG.
www.denon.com Denon Brand Company, D&M Holdings Inc. Printed in Japan 00D 511 4719 004 3.POA-3012CI_Backpage.
