Quick Start Guide

ManualsBrandsDenon ManualsAmplifiersDenon 110-Year Anniversary Edition Silver Graphite Integrated Amplifier

Quick start guide

PMA-A110

Read

first

1.PMA-A110E3_QSG_ENG_00A_200623.indd 11.PMA-A110E3_QSG_ENG_00A_200623.indd 1 2020/06/29 19:37:262020/06/29 19:37:26

PrintingColor:表1

Read

me firstのみPANTONE 10394C、その他

Black

Summary of content (14 pages)

PAGE 1
Read me first PMA-A110 Quick start guide Printing Color:表1 Read me firstのみPANTONE 10394C、その他Black 1.PMA-A110E3_QSG_ENG_00A_200623.
PAGE 2
Welcome Before You Begin Thank you for choosing a Denon amplifier. This guide provides step-by-step instructions for setting up your amplifier. What’s In the Box Quick Start Guide Safety Instructions Warranty (for North America model only) Power cord Remote control unit (RC-1237) R03/AAA batteries Integrated Amplifier 1 Printing Color : Black 1.PMA-A110E3_QSG_ENG_00A_200623.
PAGE 3
EN FR Required for Setup ES CD player Speaker systems Speaker cables Optional Computer USB cable These drawings are for illustrative purposes only and may not represent the actual product(s). 2 Printing Color : Black 1.PMA-A110E3_QSG_ENG_00A_200623.
PAGE 4
Setup There are six steps to the setup process. 1 Install batteries in the remote control unit 2 Connect the speakers to PMA-A110 3 Connect the CD player to PMA-A110 4 Plug the power cord into a power outlet 1 Install batteries in the remote control unit Batteries 5 Begin CD playback 6 Listen to computer audio via USB-DAC 1) Install the Windows driver software 2) Connect to PC or Mac 3) Listen to audio from PC or Mac 3 Printing Color : Black 1.PMA-A110E3_QSG_ENG_00A_200623.
PAGE 5
EN FR 2 Connect the speakers to PMA-A110 ES (R) w (L) q w q Connecting the speaker cables q eel off about 3/8 inch (10 mm) of sheathing P from the tip of the speaker cable, then either twist the core wire tightly or apply solder to it. w Turn the speaker terminal counterclockwise to loosen it. e I nsert the speaker cable’s core wire to all the way into the speaker terminal. r Turn the speaker terminal clockwise to tighten it. 4 Printing Color : Black 1.PMA-A110E3_QSG_ENG_00A_200623.
PAGE 6
3 Connect the CD player to PMA-A110 Your CD player AUDIO OUT R L R L R L 5 Printing Color : Black 1.PMA-A110E3_QSG_ENG_00A_200623.
PAGE 7
EN FR 4 Plug the power cord into a power outlet Connect to household power outlet (AC 120 V, 60 Hz) ES Power cord (supplied) 6 Printing Color : Black 1.PMA-A110E3_QSG_ENG_00A_200623.
PAGE 8
5 Begin CD playback 1 2 Press the power operation button. Turn VOLUME on the main unit to adjust the volume to the lowest level before turning on the power. Set the input source to “CD”. “CD” is displayed on the display of this unit. 3 Play the CD player. 4 Adjust the volume. 7 Printing Color : Black 1.PMA-A110E3_QSG_ENG_00A_200623.
PAGE 9
EN FR 6 1 Listen to computer audio via USB-DAC 3 Install the driver. q Select the language to use for the installation. w Click “OK”. ES Install the Windows driver software q NOTE The installation of the driver software is not necessary in the following cases. • When you do not play back the music from a PC using USB-DAC of this unit. • When using a macOS. The driver software cannot be installed correctly if your PC is connected to the unit by a USB cable.
PAGE 10
2 3 Connect to PC or Mac 1 Type A Computer on which the driver software and audio player software are installed USB 2.0 cable (Sold separately) Type B 2 3 Listen to audio from PC or Mac Power on. Press INPUT SELECT to switch the input source to “USB-DAC”. Set the audio signal destination to this unit on the computer. Windows OS q Click the “Start” button and click “Control Panel” on the PC. • The control panel setting list is displayed. w Click the “Sound” icon.
PAGE 11
EN Check that there is a checkmark next to “Default Device” under in “PMA-A110” of the “Playback” tab. • When there is a checkmark for a different device, click “PMAA110” and “Set Default”. r Select “PMA-A110” and click “Properties”. • The PMA-A110 Properties window is displayed. e FR Click the “Advanced” tab. Select the sampling rate and bit rate to be applied to the D/A converter. • It is recommended that “2 channel, 32 bit, 192000 Hz (Studio Quality)” is selected. u Click “Apply”. i Click “Test”.
PAGE 12
r macOS System requirements: macOS 10.13, 10.14 and 10.15 Move the cursor to “Go” on the computer screen, and then click “Utilities”. • The utility list is displayed. w Double-click “Audio MIDI Setup”. • The “Audio Devices” window is displayed. e Check that “Use this device for sound output” is checked in “PMA-A110”. • If a different device is checked, select and “Secondary click” on “PMA-A110”, and then select “Use this device for sound output”. Select the “PMA-A110” format.
PAGE 13
Owner’s Manual 4 Use your favorite music applications on your PC/Mac to play audio through the PMA-A110. • For high resolution audio playback you will need to obtain an advanced audio player software such as JRiver Media Center or Audirvana. EN FR • Refer to the Online Manual for other functions information and operation procedure details. manuals.denon.