Operation Manual
12
Basic operation
1
Press the power operation switch.
The unit is powered ON, and DECK 1/3 and the track select
knob light up.
2
Select the input source for each channel using
channel input source select knob.
For LINE3 and LINE4 input terminals, you can switch between
“PHONO” and “LINE”. For information about setting up
these terminals, see “Connecting external devices and MIC”
(vpage4).
3
Use LEVEL to adjust the input level.
•Use the level meter display select switch (CH1/2, CH3/4, or
MASTER) to set the channel at which you want to adjust the input
level, and adjust to the appropriate level while referring to the
channel/master level meter.
4
Use HI/MID/LOW to adjust the audio quality.
5
Use the channel fader knob and cross fader knob to
adjust the volume.
6
Use MASTER LEVEL to adjust the output level.
Basic operation
n Adjust the cross fader curve
Adjusts the startup response of the cross fader.
Beforehand, use the cross fader assignment switch on the front
panel to set each channel to the cross fader L and R.
Turn X FADER to adjust the curve response of the cross
fader.
: Slow startup curve characteristics (nine steps).
: Sharp startup characteristics, with cut-in/cut-out.
クロスフェーダー
アサインスイッチ
クロスフェーダー
つまみ
チャンネルフェーダー
つまみ
X FADER
LEVEL
HI/MID/LOW
チャンネル入力ソース
切り替えつまみ
MASTER LEVEL
電源スイッチ
DECK 1/3
トラック選択つまみ
チャンネル/マスター
レベルメーター
レベルメーター表示
切り替えスイッチ
Top panel
Front panel
Rear panel
This section describes operations of the unit without using the DJ software.
•For information about how to operate the DJ software, see the instruction manual for the DJ software or the help menu.
•For information about the buttons on the unit for operating the DJ software and their functions, see “Top panel” (vpage20).
Channel input source
select knob
Power operation switch
Cross fader knob
Channel fader knob
Level meter display
select switch
Track select knob
Cross fader assignment switch
Channel/master
level meter
Before use
Connections
Installing and setting up
supplied software
Basic
operations
USB settings
Other
functions
Part names and
functions
Troubleshooting
Specifications
Index
System
diagram
Basic
operations