Operation Manual

21
Before use Connections
Basic
operations
Installing and setting up
supplied software
USB settings
Troubleshooting Index
Specifications
Signal system chart
Part names and
functions
u Shift button (SHIFT)
i Hot cue switch button and display
(CUE 5 – 8)
ThebuttonswitchesCUE1–4/CUE5–8.
•When CUE 5 – 8 is selected, the display lights
up.
o Deck switch button (DECK CHG.)
Selects the deck.
Q0 Key lock button (KEY LOCK)
With this ON, the key does not change even if
you adjust the tempo during playback.
Q1 Jog wheel
Performs the search operation or bend operation.
•Hold down u SHIFT and turn to scroll through
the list.
Q2 Pitch fader slider
Adjusts the playback pitch.
•Move the knob toward the “–” direction to
slow down the pitch and the “+” direction to
speed up the pitch.
Q3 Beat sync button (SYNC)
Performs auto beat matching.
•Hold u SHIFT and press this button to set
the currently selected deck to the beat sync
master deck.
Q4 Hot cue button (CUE)
Sets the hot cue point and stutters the hot cue
point when pushed repeatedly.
•Hold down u SHIFT and press this button to
jump to the start of the deck.
Q5 Play/pause button (1/3)
Hold down e SAMP. and press this button to
batch playback the sample slot.
Also, The operations differ as follows
depending on whether deck A (B) or C (D) are
selected using o DECK CHG.
DECK A (B): Plays back when pressed while
playback is stopped. Pauses playback when
pressed during playback.
DECK C (D): Plays back the sample slots
in a batch. Pauses all when pressed during
playback.
Q6 Pitch bend adjustment buttons
(PITCH BEND –/+)
Adjust the pitch temporarily.
•Hold down u SHIFT and press this button to
fastforward/rewind.
Q7 VINYL switching button
(VINYL MODE)
ON:SwitchestoVINYLmode.
•The touch sensor is enabled when in VINYL
mode.
OFF: Switches to BEND mode.
•The touch sensor is disabled when in BEND
mode.
•Hold down u SHIFT and press this button to
disable the jog wheel operation (jog wheel lock
function).
Q8 Channel fader knob
Adjusts the mixing level for each deck.
Q9 Crossfader knob
Adjusts the output balance of the channel level.
W0 Channel input level adjustment knob
(LEVEL)
Top panel
Q3 Q6 Q9Q4 Q5 Q7
E4
E0
E3
E1
E2
W9
Q8
W7
W5
W6
W4
W0
W1
W2
W3
W8
q
w
r
e
t
i
o
Q0
Q2
Q1
y
u