Contents Setup Use Troubleshooting . NETWORK MULTI-ROOM PRE-AMPLIFIER Owner’s Manual .
Contents Setup Introduction Before your begin System requirements Network requirements Controller requirements Getting to know your HEOS Super Link Front panel Back panel Placing your HEOS Super Link Attaching the rack mount brackets Zone connection Connecting external devices Connecting to an external amplifier or AV receiver Connecting a subwoofer Connecting a USB storage device Trigger control Connecting an audio playback device Connecting to network Powering your HEOS Super Link Getting the HEOS app
Contents Setup Listening to the same music in multiple rooms Grouping rooms Ungrouping rooms Grouping all rooms (party mode) Ungrouping all rooms Selecting the music track or station from music sources Rearranging the now playing queue Deleting songs from the play queue Deleting all songs from the play queue Saving playlists Performing repeat and shuffle playback Using the favorite Adding to HEOS favorite Deleting station from the HEOS favorite Use Troubleshooting 31 31 32 33 34 35 37 37 38 38 38 39 39
Contents Setup Use Updating your system Power management Power modes Quick Start Mode Deep Standby Off BASIC TROUBLESHOOTING My HEOS device turns off and the power LED flashes in red Music cuts out or delays sometimes I hear a delay when using the external input with my TV I hear noise from the OPTICAL OUT audio Resetting your HEOS device Restoring the HEOS device to factory defaults Contact Denon Troubleshooting 48 49 49 49 49 49 50 50 50 51 51 52 52 53 Status LED Appendix Status LED table Supported
Contents Setup Use Troubleshooting Status LED Appendix Thank you for purchasing this HEOS product. To ensure proper operation, please read this owner’s manual carefully before using the product. NOTE 0 THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE. For latest information, please visit http://www.HEOSbyDenon.
Contents Setup Use Troubleshooting Status LED Appendix Before your begin NOTE 0 If you have already installed at least one HEOS device, please skip to the section “Adding more HEOS devices”. System requirements Before you begin installing your first HEOS device, please make sure you understand and meet a few basic requirements. o Network requirements Wireless Router - In order to use your HEOS music system, you should have a working wireless (Wi-Fi) network in your home.
Contents Setup Use Troubleshooting Status LED Appendix o Controller requirements . . You can control your HEOS wireless multi-room sound system using the free HEOS app on any iOS or Android mobile device that meets these minimum requirements: iOS Minimum Requirements 0 iOS version 7.0 or later 0 iPhone® 4 or newer 0 iPad® 2 or newer 0 iPod touch® (5th generation) or newer Android Minimum Requirements 0 Android OS version 4.
Contents Setup Use Troubleshooting Status LED Appendix Getting to know your HEOS Super Link Unpack your HEOS Super Link from the box and verify that the following items are included: HEOS Super Link QUICK Ethernet cable Rack mount brackets Thank you note STR T GU IDE Quick Start Guide (for North America) Safety Instructions Warranty (North America user only) (for Europe) (for UK) . Power cords NOTE 0 Please use the power cord included in the box for your device.
Contents Setup Use Troubleshooting Status LED Appendix o Front panel w e r . q C Network indicators Flashes green to indicate network activity. (v p. 55) A Power operation button (X) Used to enter Quick Start Mode or Deep Standby and return from them. D Zone indicators Please refer to the “Status indicator Table”. (v p. 56) B Power indicator This is lit as follows according to the power status: (v p.
Contents Setup Use Troubleshooting Status LED Appendix o Back panel y u i o Q0 . q w e rt A PRE OUT connectors Used to connect external amplifiers. (v p. 14) F Digital Input (OPTICAL IN/COAXIAL IN) connectors Used to connect devices equipped with digital audio outputs. (v p. 16) B LINE IN connectors Used to connect devices equipped with analog audio outputs. (v p. 16) G NETWORK connectors Used to connect this unit to a wired Ethernet network. (v p.
Contents Setup Use Troubleshooting Placing your HEOS Super Link . The HEOS Super Link is designed to add HEOS multi-room audio functionality to an external device which offers audio amplification. You should place your HEOS Super Link in a convenient location near the amplification device you are connecting it to.
Contents Setup Use Troubleshooting . o Attaching the rack mount brackets Attach the included rack mounting brackets to the sides of the HEOS Super Link if you want to mount the HEOS Super Link in a standard EIA equipment rack. 1 2 Status LED Remove the two screws on each side of the HEOS Super Link. Align the brackets with the screw holes and reattach the screws making sure they are secure.
Contents Setup Use Troubleshooting Status LED Appendix Zone connection You can simultaneously play the same source in all four HEOS Super Link Zones if desired. You can also play different sources in different zones. Connection and function of page 14 to 18 are ZONE1. ZONE2, ZONE3 and ZONE4 are same as ZONE1. ZONE2 ZONE3 ZONE4 . ZONE1 ZONE3 ZONE2 .
Contents Setup Use Troubleshooting Status LED Appendix Connecting external devices o Connecting to an external amplifier or AV receiver o Connecting a subwoofer Connect the PRE OUT “L” output to an input on your powered subwoofer or your subwoofer amplifier. (v p. 42) Connect the PRE OUT output to an available input on your amplifier or AV receiver using the appropriate cables.
Contents Setup Use Troubleshooting Status LED Appendix o Trigger control o Connecting a USB storage device If the power amplifier connected to this unit has a trigger input connector, connect it to the TRIGGER OUT jack of this unit using a 3.5mm cable (not included). A signal up to 12 V/150 mA is output from the TRIGGER OUT jack. Connect a FAT32 formatted USB storage device containing digital music files to any available USB port. USB memory device . .
Contents Setup Use Troubleshooting Status LED Appendix o Connecting an audio playback device Connect the LINE IN, COAXIAL IN or OPTICAL IN input to an audio playback device (CD player, portable music player, etc...) using the appropriate cables. Digital device Analog device AUDIO AUDIO AUDIO OUT R L R OPTICAL OUT L or .
Contents Setup Use Troubleshooting Status LED Appendix n Daisy chain o Connecting to network You can use the second Ethernet connection to connect another HEOS Super Link to your network. . Router . Router NOTE 0 Each HEOS Super Link contains four HEOS modules and therefore always counts as four devices towards the maximum number of 32 HEOS devices supported on any one network. Up to 8 HEOS Super Link units are supported on a single network.
Setup Contents Use Troubleshooting Status LED Appendix Powering your HEOS Super Link Connect the appropriate power cord for your region between the back of the HEOS Super Link and a wall outlet and then switch the rear panel power switch to the ON position. for Europe (AC 220 - 240 V, 50/60 Hz) for Australia (AC 220 - 240 V, 50 Hz) for North America (AC 120 V, 60 Hz) . for UK (AC 220 - 240 V, 50 Hz) Getting the HEOS app . The HEOS app is the heart of the HEOS experience.
Contents Setup Use Troubleshooting Status LED Appendix Adding more HEOS devices The HEOS multi-room sound system is a true multi-room audio system that automatically synchronizes audio playback between multiple HEOS devices so that the audio coming from different rooms is perfectly in sync and always sounds amazing! You can easily add up to 32 devices to your HEOS system.
Contents Setup Use Troubleshooting Status LED Appendix Adding wireless HEOS devices You can add additional wireless HEOS devices to your HEOS system by selecting “Add Device” from the HEOS app’s settings menu and follow the instructions: 1 2 Music Settings . Add Device NOTE 0 HEOS Super Link can not be connected to a wireless network.
Contents Setup Use Troubleshooting Status LED Appendix Using your HEOS Super Link Once you have your HEOS Super Link connected to your network and the HEOS app installed on your mobile device, it’s easy to start enjoying your favorite music. You can listen to something different in every room or the same music perfectly synchronized in all rooms.
Contents Setup Use Troubleshooting Status LED Appendix Playing music stored on your mobile device Listening to radio The HEOS system includes access to more than 100,000 free internet radio streams from all corners of the globe via the TuneIn radio service. Just select the TuneIn logo from the main “Music” menu and browse among the 100,000 stations neatly organized into popular categories and select a station that appeals to your mood.
Contents Setup Use Troubleshooting Playing music from your networked PC or NAS 3 Appendix Audio signal PC Select “Music Servers” from the “Music” tab. Select the name of your networked PC or NAS (Network Attached Storage) server. Browse the music on your PC/NAS and select something to play. .
Contents Setup Use Troubleshooting Playing music from an external audio device 2 3 4 Connect an external audio device to the digital optical, coaxial or analog RCA stereo input on the back of the HEOS Super Link. Select “Inputs” from the Music tab. Select the name of the HEOS Super Link and which input to which you connected the audio device in step 1. Initiate playback on the audio device. .
Contents Setup Use Troubleshooting Streaming an external audio device to any HEOS device Audio signal The sound from the audio device can be played directly on the selected device or digitized and sent over your network to other HEOS devices. 2 3 4 Connect an external audio device to the digital optical, coaxial or analog RCA stereo input on the back of the HEOS Super Link. Select “Inputs” from the Music tab.
Contents Setup Use Troubleshooting Playing music from a USB device 1 2 3 4 Audio signal Insert a FAT32 formatted USB device into the USB port on the back of the HEOS Super Link. Select “USB Music” from the “Music” tab. Select the name of the HEOS Super Link and which input to which you connected the audio device in step 1. Browse the music on your USB device and select something to play. NOTE .
Contents Setup Use Troubleshooting Status LED Appendix o Changing your HEOS account HEOS account 1 2 o What is a HEOS account? A HEOS account is master account or “keychain” for managing all of your HEOS music services with one single username and password. 3 4 o Why do I need a HEOS account? With the HEOS account you just have to enter your music services login names and passwords one time. This allows you to easily and quickly use multiple controller apps on different devices.
Contents Setup Use Troubleshooting Status LED Appendix o Changing music service settings Playing from streaming music services 1 2 A music service is an online music company that provides access to vast music collections via free and/or paid subscriptions. Depending upon your geographical location, there are several options to choose from. For more information about which services are available in your area please visit http://www.HEOSbyDenon.
Contents Setup Use Troubleshooting 1 2 3 If you connected external audio source components (like CD players, portable music players, Cable Boxes, etc...) to any of your HEOS devices inputs, you can rename the default input names to describe the actual source or hide any inputs that are not being used. 2 3 4 Appendix o Changing the name of the inputs Managing inputs 1 Status LED Select the Settings a icon located in the upper left corner of the main “Music” menu to display the Settings menu.
Contents Setup Use Troubleshooting Managing your phone Your smartphone or tablet can be hidden if it does not need to be in the “Music Sources” menu. 1 2 3 4 Select the Settings a icon located in the upper left corner of the main “Music” menu to display the Settings menu. Select “Music Sources”. Select “This iPhone/iPod/iPad/Phone”. Toggle “This iPhone/iPod/iPad/Phone” to OFF to prevent the service logo from appearing on the main “Music” menu.
Contents Setup Use Troubleshooting Listening to the same music in multiple rooms Status LED Appendix Rooms Rooms Drag one room into another to group them Drag one room into another to group them Dining Dining The HEOS system is a true multiroom audio system that automatically synchronizes audio playback between multiple devices so that the audio coming from different rooms is perfectly in sync and always sounds amazing! You can easily add up to 32 devices to your HEOS system.
Contents Setup Use Troubleshooting o Ungrouping rooms 1 2 Press and hold your finger on room that you want to remove from the group. Status LED Appendix Rooms Rooms Drag one room into another to group them Drag one room into another to group them Dining Dining Song Name 1 Drag it out of the group and lift your finger. Song Name 1 Living Living Song Name 2 Music will stop playing in the room you dragged out of the group but will continue playing in any remaining rooms.
Contents Setup Use Troubleshooting o Grouping all rooms (party mode) Rooms You can easily group 16 rooms together into Party Mode by using a “pinch” gesture. Drag one room into another to group them Dining 1 Appendix Rooms Drag one room into another to group them Dining+Living+... Song Name 1 Song Name 1 Place two fingers on the screen over the list of rooms. Living Quickly pinch your two fingers together and release.
Contents Setup Use Troubleshooting o Ungrouping all rooms You can easily ungroup all of your rooms and exit Party Mode by using a “spread” gesture. 2 Appendix Rooms Rooms Drag one room into another to group them Drag one room into another to group them Dining Song Name 1 Place two fingers close together on the screen over list of rooms. 1 Dining Song Name 1 Living Dining Quickly spread your two fingers apart from each other and release.
Contents Setup Use Troubleshooting Status LED Selecting the music track or station from music sources Music Tap the “Music” tab and select a music source. This Phone Music Servers Playlists Rooms USB Music History Music Now Playing . 1 Appendix 0 All music services displayed may not be available in your location.
Contents Use Troubleshooting Status LED Appendix Browse the music to play. After selecting a music track or radio station the app will automatically change to the “Now Playing” screen. Now Plaing Album Artist Album 10 Tracks,60 Mins.,2014 0 When you select a music track to play you will be asked how you want to queue up your music. Play Now: Inserts the item into the queue after the currently playing track and plays the selected item immediately.
Contents Setup Use Troubleshooting Rearranging the now playing queue 3 4 Appendix Deleting songs from the play queue Once you have songs lined up in your queue, you might want to rearrange the order or remove some songs: 1 2 Status LED You can remove songs one at a time from the Now Playing Queue: 1 2 Tap the “Now Playing” tab. Tap the Queue d icon in the upper right corner of the screen. 3 4 5 Tap the Pencil e icon to enter Edit mode.
Contents Setup Use Troubleshooting Deleting all songs from the play queue 3 Appendix Saving playlists You can remove all of the songs from the Now Playing Queue: 1 2 Status LED You can save the Now Playing Queue as a HEOS Playlist that you can recall later. The new playlist will be available from the Playlists button on the “Music” tab on every controller app connected to your HEOS system. Tap the “Now Playing” tab. 1 2 Tap the Queue d icon in the upper right corner of the screen.
Contents Setup Use Troubleshooting Status LED Appendix o Deleting station from the HEOS favorite Using the favorite 1 2 3 4 HEOS uses a "HEOS Favorites" to line up station you want to start play quickly the favorite stations. Station can be selected from online music sources such as "Radio" or "Station" type streams. "HEOS Favorites" will display a list of the stations of various services. o Adding to HEOS favorite Select a station of an online music source.
Contents Setup Use Troubleshooting Status LED Appendix Making adjustments You can adjust specific settings for each of your HEOS Super Links in your system: 1 2 3 Changing the name of a zone 1 2 3 Select the Settings a icon located in the upper left corner of the main “Music” menu to display the Settings menu. Select “My Devices” to display a list of your devices. Select the HEOS Super Link and the Zone you want to adjust. Changing the name of a HEOS Super Link 1 2 3 Select “Name”.
Contents Setup Use Troubleshooting Adjusting the equalizer 1 2 Selects the transcoding option for rebroadcasting audio from one HEOS device to another HEOS device (or group of devices) across the network. When set to “Normal”, high bit rate audio sources originating from the first device (such as AUX input, WAV, FLAC and PCM) will be transcoded to ensure the highest level of reliability for the audio stream. Select “EQ”. Adjust the “Treble” or “Bass” up or down.
Contents Setup Use Troubleshooting Appendix Using a subwoofer Adjusting the high pass filter Set the High Pass Filter to limit the low frequency signal being sent to your speakers. 1 2 Status LED 1 2 Select “High Pass Filter”. Select the frequency cutoff point: Select “Subwoofer”. Enable the Sub Out (L) setting. 0 If you enable the IP control, “Subwoofer” will be disappeared and forced to change.
Contents Setup Use Troubleshooting Adjusting the line out 1 2 Status LED Appendix TV Sound Grouping Set when you want to play TV audio or external input audio from this unit through a different HEOS device. Select “Line Out Level”. 1 Select “Fixed” to lock the volume at the optimal level or select “Variable” to control the volume from the Now Playing screen. Select “TV Sound Grouping”. o Enable Enables grouping.
Contents Setup Use Troubleshooting 1 2 Caution 0 Adjusting these settings may disconnect your device from your network and possibly render your device unusable. Do not use these features unless you are comfortable making advanced adjustments. Select “Advanced”. Select “FIRMWARE UPDATE” tab. n Update status o Network settings 3 Appendix o Firmware upgrade Advanced settings 1 2 Status LED Manually check for a firmware upgrade. n Allow updates Select “Advanced”. Select “NETWORK SETTINGS” tab.
Contents Setup Use Troubleshooting o About Viewing technical details about the HEOS device. 1 2 3 Select “Advanced”. Select “ABOUT” tab. Scroll down to see information about the device’s a. Hardware b. Software c.
Contents Setup Use Troubleshooting Status LED Appendix External device control The HEOS Super Link can tightly integrate with most Denon AV receiver to allow them to operate as if they were one device. You can configure your HEOS Super Link to tell the connected device when to turn on, turn off, select the correct input and adjust volume and mute.
Contents Setup Use Troubleshooting o Trigger out Select Trigger Control when you are connecting your HEOS to a power amp that supports +12 V trigger input. The HEOS app can control the power on and off for the amp. 1 2 Select Trigger. Select Done. NOTE 0 You can test the connection to the amp by pressing the power on, off in setting screen for the amp.
Contents Setup Use Troubleshooting Status LED Appendix Updating your system HEOS has the ability to add enhancements and updated functionality via your high speed Internet connection. Follow the instructions on the screen to update the HEOS device and/or your controller App. 1 2 Select the Settings a icon located in the upper left corner of the main “Music” menu to display the Settings menu. Select “Software Update”.
Contents Setup Use Troubleshooting Status LED Appendix Power management Power modes o Quick Start Mode o Deep Standby To save power, the device will automatically enter “Quick Start Mode” whenever there is no network access or playback for 20 minutes and will automatically resume to full power whenever the device is selected and playing music. The each Zone indicator will be dimmed during Quick Start Mode as it is a fully automatic function. Also push Power button, the device enter Quick Start Mode.
Contents Setup Use Troubleshooting Status LED Appendix BASIC TROUBLESHOOTING My HEOS device turns off and the power LED flashes in red Solution Refer to Page 0 The protection circuit has been activated due to a rise in temperature within your HEOS device. Turn the power off, wait about an hour until this device cools down sufficiently, and then turn the power on again. – Music cuts out or delays sometimes Solution Refer to Page 0 Make sure your Internet connection is operating correctly.
Contents Setup Use Troubleshooting Status LED Appendix I hear a delay when using the external input with my TV Solution Refer to Page 0 If you are connecting the External input with your cable or satellite box for enjoying TV audio through multiple HEOS devices, 24 0 You can avoid this delay by listening only to the device which is directly connected to the set top box. － you may hear a delay between when you see someone speak and when you hear the audio.
Contents Setup Use Troubleshooting Status LED Appendix Resetting your HEOS device Solution Refer to Page Resetting your HEOS device will clear out EQ, and name but retain it’s current software. To reset your HEOS Super Link, press the Reset button on the back and hold it in until the Zone LED begins to flash amber.
Contents Setup Use Troubleshooting Status LED Appendix Contact Denon For U.S. & Canada only: If you need further assistance with your HEOS product, please contact HEOS by Denon Customer Support Services below: Website: www.HEOSbyDenon.com/Support Email: Support@HEOSbyDenon.com Live Chat: www.HEOSbyDenon.
Contents Setup Use Troubleshooting Status LED Appendix Status LED table o Power indicator Device Operation Description Front LED Action No AC power, Master Power Switch OFF, Deep Standby ON Power ON Power Management Quick Start Mode-When all Zone enter Quick Start Mode . OFF . (off) . (solid) (solid) Hardware protection - Refer to “BASIC TROUBLESHOOTING” (v p. 50) .
Contents Setup Use Troubleshooting Status LED Appendix o Network indicators Device Operation Description Not Connected to your network Connect Connected to your network . OFF Front LED Action .
Contents Setup Use Troubleshooting Status LED Appendix o Zone indicators OFF Description Front LED Action No AC Power, Master Power Switch OFF, Deep Standby (off) . Master Power Switch Booting ON . Device Operation (blink) . Ready-Configured and connected to your network (solid) ON .
Contents Setup Device Operation Use Troubleshooting Description Appendix Front LED Action . Updating (blink) . Rebooting (blink) Ready-Configured and connected to your network .
Contents Setup Device Operation Use Troubleshooting Status LED Description Appendix Front LED Action . Soft reset - Clear user settings (fast blink) . Hard reset - Factory restore (blink) Reset . Rebooting (blink) .
Contents Setup Device Operation Use Troubleshooting Description Appendix Front LED Action . Firmware Error (slow blink (NOT fade)) Hardware Error . Errors Status LED (fast blink) . Network Error (solid) . Volume Change (quick blink) .
Setup Device Operation Use Troubleshooting Status LED Description Appendix Front LED Action Quick Start mode-When all Zone enter Quick Start Mode . Contents (solid) Power Management .
Setup Contents Use Troubleshooting Status LED Appendix Supported file types and codecs Frequency Sample Rate File Extension Codec Bit Rates 32/44.1/48 88.2/96/176.4 192 kHz 16/24 bit wav PCM 32 kHz 44.1 kHz 48 kHz 16 bit mp3 MPEG-1 Audio Layer 3 CBR/VBR 32 - 320 kbps 32 kHz 44.1 kHz 48 kHz 16 bit m4a aac AAC-LC 48 - 320 kbps 32 kHz 44.1 kHz 48 kHz 16 bit wma wma9 CBR CBR:48 - 192 kbps 44.1/48 88.2/96/176.4 192 kHz 16/24 bit flac flac --- 44.1/48 88.2/96/176.
Contents Setup Use Troubleshooting Status LED Specifications o Audio section 0 PRE OUT (LINE IN) THD+N: 0.003 % S/N ratio: 105 dB Frequency response: 10 Hz to 40 kHz: +1, -3dB 0 PRE OUT (Optical IN/Coaxial IN) THD+N: 0.003 % S/N ratio: 110 dB Frequency response: 10 Hz to 80 kHz: +1, -3dB (Sampling frequency 192kHz) 0 Digital OUT Coaxial: 0.5 Vp-p Optical: -15 – -21dBm 0 Digital IN Coaxial: Optical: 0.
Contents Setup Use Troubleshooting Status LED o General Operating temperature: 41 °F - 95 °F (5 °C - 35 °C) Power supply: AC 120 V, 60 Hz (for North America) AC 220 - 240 V, 50/60 Hz (for Europe, UK and Australia) Power consumption: 60 W Power consumption in Deep Standby Mode: 0.
Contents Setup Use Troubleshooting Status LED 1/8 (3) 2 1/8 (53) 10 3/4 (272) 14 7/8 (375) 15 1/8 (384) 2 3/8 (59) 1/4 (6) o Dimensions (Unit : in. (mm)) 1 1/4 (30) . 1 1/4 (30) 1 3/4 (43) 13 5/8 (344) 1 3/4 (43) 1/4 (6) 2 (50) 1 3/4 (44) 19 1/8 (484) 17 (430) o Weight : 10 lbs 9 oz (4.8 kg) (with brackets) 10 lbs 2 oz (4.6 kg) (w/o brackets) For the purpose of improvement, the specifications and design are subject to change without notice.
Contents Setup Use Troubleshooting Status LED Appendix Information . Trademarks . Amazon, Kindle, Echo, Alexa, Dash, Fire and all related logos are trademarks of Amazon.com, Inc. or its affiliates. . Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. . Google Play and the Google Play logo are trademarks of Google Inc. Apple, the Apple logo, iPad, iPhone, and iPod touch are trademarks of Apple Inc.
Contents Setup Use Troubleshooting Status LED Appendix License n LGPL o License information for the software used in the unit Open Source Used ffmpeg glibc libmms About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies. After you purchase this product, you may procure, modify or distribute the source code of the GPL/LGPL software that is used in the product.
Contents Setup Use Troubleshooting n e2fsprogs-libs-1.40.8/lib/uuid Status LED Appendix n expat-2.0.1 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers. 1.
Contents Setup Use Troubleshooting n getopt Status LED Appendix n jQuery http://cvsweb.netbsd.org/bsdweb.cgi/src/lib/libc/stdlib/ Copyright (c) 1987, 1993, 1994 The Regents of the University of California. All rights reserved. Copyright 2014 jQuery Foundation and other contributors http://jquery.
Contents Setup Use Troubleshooting Status LED Appendix n libtar-1.2.11 n libpcap-1.4.0 Copyright (c) 1998-2003 University of Illinois Board of Trustees Copyright (c) 1998-2003 Mark D. Roth All rights reserved.
Contents Setup Use Troubleshooting n mDNS 320.10.80 Status LED Appendix n mongoose The majority of the source code in the mDNSResponder project is licensed under the terms of the Apache License, Version 2.0, available from:
Contents Setup Use Troubleshooting n openssl-1.0.0d Status LED Appendix THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Contents Setup Use Troubleshooting n portmap-6.0 Status LED Appendix n pstdint.h-0.1.12 Copyright (c) 1990 The Regents of the University of California. z All rights reserved. z Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: z BSD License: z Copyright (c) 2005-2011 Paul Hsieh z All rights reserved.
Contents Setup Use Troubleshooting n rl78flash 2000.3.1 Status LED Appendix n sqlite 2003.5.7 License ======= The MIT License (MIT) Copyright (c) 2012 Maxim Salov SQLite Copyright SQLite is in the Public Domain All of the code and documentation in SQLite has been dedicated to the public domain by the authors.
Contents Setup Use Troubleshooting n strlcpy.c , v1.11 Status LED Appendix n tinyxml 2002.4.3 z Copyright (c) 1998 Todd C. Miller www.sourceforge.net/projects/tinyxml Original file by Yves Berquin. z Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
Contents Setup Use Troubleshooting n Tremor Status LED Appendix n zlib http://wiki.xiph.org/index.php/Tremor Copyright (c) 2002, Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: http://www.zlib.net/ zlib.h -- interface of the ‘zlib’ general purpose compression library version 1.2.
Contents Setup Use Troubleshooting n The Spotify software is subject to third party licenses found here: www.spotify.
HEOSbyDenon.com 77 3520 10565 00ADA Copyright © 2017 D&M Holdings Inc. All Rights Reserved.
