User Guide

9
DVM-4800
Item
Player mode and
Function Display
Cancellation
button combination method
CD laser drive In STOP mode, press CD laser drive current measurement LDC_028_026
current PAUSE and FWD-SKIP CD laser drive current is measured
Measured current
measurement buttons on the player, and and the result is displayed together Initial current stored in EEPROM
DISPLAY button on the with the initial value stored in CD laser current measurement mode
remote control unit. EEPROM.
After the measurement, CD laser The value denotes the current in
emission is kept on. It is turned off decimal notation
when POWER key is switched off. (It The above example shows the
is also turned off when the primary initial current is 28mA and the
power is switched off.) measured value is 26mA.
Version In STOP mode, press Version display srrr_xyzzz Cancelled
display PAUSE and OPEN buttons System controller release number automatically
on the player, and "7"
System controller model number 5 seconds later.
button on the remote
System controller generation
control unit. Panel controller release number
Panel controller model number
Lighting of In ** mode, press Lighting of display tube Press STOP
display tube PAUSE and OPEN buttons or OPEN button.
on the player, and "9"
button on the remote
control unit.
Dealer's lock In STOP mode, press Dealer's lock "LOCKED" sign appears when Repeat the
STOP button on the The lock is switched ON or OFF. dealer's lock is switched on, or same operation.
player, and POWER button When dealer's lock is ON, it prohibits when secondary power key or tray
on the remote control unit. switching off of the secondary power opening key is pressed while the
and tray opening. lock is on.
When the lock is switched, its ON/OFF "UNLOCKED" sign appears when
status is stored in EEPROM. dealer's lock is switched off.
Initializaition In STOP mode, press Initialization "INITIALIZED"
PAUSE, BWD-SKIP and User settings are cancelled and player
OPEN buttons on the is initialized to factory setting.
player for 3 seconds or
longer.
Region display In STOP mode, press Region display x_yy_zzz Cancelled
PAUSE and OPEN buttons N: NTSC/6: PAL60 automatically
on the player, and "6" N: noPAL/P: PAL 5 seconds later.
button on the remote Region No.
control unit.
Item
Player mode and
Function Display
Cancellation
button combination method
Timer 1 check In STOP mode, press Timer 1 check T1_1234_5678 Cancelled
PAUSE and FWD-SKIP Laser operation timer Operation time is Shown to the left is DVD laser time, automatically
buttons on the player, and measured separately for DVD laser and to the right CD laser time. 5 seconds later.
"5" button on the remote and CD laser. Time is shown in 4 digits of decimal
control unit. notation in a unit of 10 hours.
"0000" will follow "9999".
Timer 1 reset While displaying Timer 1 Timer 1 reset T1_0000_0000 Cancelled
data, press STOP and Laser operation timer Operation time automatically
FWD-SKIP buttons on the of both DVD laser and CD laser is 5 seconds later.
player, and "5" button on reset all at once.
the remote control unit.
Timer 2 check In STOP mode, press Timer 2 check T2_1234 Cancelled
PAUSE and FWD-SKIP Spindle motor operation timer automatically
buttons on the player, and Time is shown in 4 digits of decimal 5 seconds later.
"6" button on the remote notation in a unit of 10 hours.
control unit. "0000" will follow "9999".
Timer 2 reset While displaying Timer 2 Timer 2 reset T2_0000 Cancelled
data, press STOP and Spindle motor operation timer automatically
FWD-SKIP buttons on the 5 seconds later.
player, and "6" button on
the remote control unit.