DVM-4800 OPERATING INSTRUCTIONS MENU TOP MENU AUDI O SUBTITLE E ANGL ENTER RETURN B PLAY HDCD STILL / PAUSE STOP OPEN / CLOSE AL24 PLUS POWER ¢ ON / STANDBY £ OFF AUDIO ONLY BASS ENHANCER PROGRESSIVE SCAN SKIP DISC SKIP 1 2 4 5 7 8 0 10 3 6 9 SLOW / SEARCH DISC 1 CLEAR REMOTE SENSOR DISC 2 DISC 3 5 DVD Audio/Video Automatic Disc Loading System DISC 4 DISC 5 PCM AUDIO TECHNOLOGY / DVD AUDIO-VIDEO AUTO CHANGER DVM-4800 REMOTE CONTROL UNIT RC-548 FOR ENGLISH READERS Down
FRANCAIS IMPORTANT TO SAFETY WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. ENGLISH NOTE: This DVD video player uses the semiconductor laser. To allow you to enjoy music at a stable operation, it is recommended to use this in a room of 5°C (41°F) — 35°C (95°F). CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR REFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: 1.
ENGLISH FRANCAIS FRONT PANEL w r yi q e t u o !0 !4 !6 !8 !2 !3 !5 !7 !1 B PLAY AL24 PLUS DISC BASS ENHANCER PROGRESSIVE SCAN DVD V CD VR AUDIO VIDEO PROGRESSIVE SCAN 1 £ OFF AUDIO ONLY DISC HDCD POWER ¢ ON / STANDBY DISC SKIP 2 3 4 5 GROUP TITLE TRACK CHAP PG D.MIX P.PCM MLT.CH V.S.
SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Read Instructions – All the safety and operating instructions should be read before the product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. Follow Instructions – All operating and use instructions should be followed.
FRANCAIS ENGLISH NOTE ON USE • Do not let foreign objects in the set. • Keep the set free from moisture, water, and dust. • Avoid high temperatures. Allow for sufficient heat dispersion when installed on a rack. • Unplug the power cord when not using the set for long periods of time. • Do not let insecticides, benzene, and thinner come in contact with the set. • Handle the power cord carefully. Hold the plug when unplugging the cord.
ENGLISH — TABLE OF CONTENTS — z x c v b n m , .
ENGLISH 4. Dolby Digital decoder (NOTE 1) Dolby Digital, a digital discrete system in which the different channels are completely independent, recreates “three-dimensional” sound fields (sounds with a sense of distance, movement and position) with no crosstalk between channels for greater reality. In addition, the 5 channels (excluding the 0.1 channel for low frequency effects) have a playback range extending to 20 kHz, the same as the range of CDs, thus resulting in clearer, more richly expressive sound.
ENGLISH 2 DISCS • The types of discs listed on the table below can be used on the DVM-4800. The marks are indicated on the disc labels or jackets. Disc type Logo Indication used in instructions Region number Video system . NTSC (and PAL, but audio only) DVD-A NTSC DVD-V 2 Disc terminology • Titles and chapters (DVD-V) DVDs are divided into several large sections called “titles” and smaller sections called “chapters”. Numbers are allotted to these sections.
ENGLISH 3 CAUTIONS ON HANDLING DISCS Discs Cautions on Handling Discs Only the discs including the marks shown on page 8 can be played on the DVM-4800. Note, however, that discs with special shapes (heart-shaped discs, hexagonal discs, etc.) cannot be played on the DVM-4800. Do not attempt to play such discs, as they may damage the player. • Do not get fingerprints, grease or dirt on discs. • Be especially careful not to scratch discs when removing them from their cases. • Do not bend discs.
ENGLISH 4 CONNECTIONS NOTES: • Read the manuals of all the components when making • Plug the power cord securely into the power outlet. Incomplete connection may result in noise. connections. • Keep the power cord unplugged until all connections have been • Binding the power cord together with connection cords may result in humming or noise. completed. • If the power is on when connections are made, noise may be • Plug in the power cord in the direction in which the sound is most to your liking.
ENGLISH NOTES: • Connect the DVM-4800’s video outputs to the TV either directly or • Some discs contain copy prohibit signals. If such discs are played through an AV amplifier. Do not connect it via a VCR (video via a VCR, the copy prohibit system may cause disturbance in the cassette recorder). picture.
ENGLISH (3) Connecting to a Dolby Digital (AC-3) or DTS (digital theater systems) Decoder When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD player’s digital audio output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound with the power and sense of presence of a movie theater or concert hall.
ENGLISH 2 Sound output from the DVM-4800’s digital audio output connectors Disc played Audio recording format Dolby Digital (AC-3) DVD video DTS Linear PCM 48 kHz/96 kHz 16/20/24 bit Video CD CD MPEG1 Linear PCM Sound output • Dolby Digital bitstream (1 to 5.1 channels) or PCM (48 kHz/16 bit) (2 channels). (NOTE 1, 2) Select with the “Audio” default setting. (See page 51.) • dts bitstream or no output. Select with the “Audio” default setting. (See page 51.
ENGLISH (4) Connecting a basic 5.1-channel surround system This is the basic system you will need to fully enjoy the high quality sound found on DVD-Audio and to enjoy home theater with DVD-Video. TV VIDEO IN DVM-4800 Center speaker Front speaker (right) Front speaker (left) Subwoofer Surround speaker (left) Surround speaker (right) AV amplifier with 5.1-channel input terminals 14 From Disc-Player.
ENGLISH (5) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.) TV VIDEO IN Set the “Audio” default setting as shown below. (See page 51.) • “PCM Down conversion: “NO” / “YES” • “Dolby Digital”: “Bitstream” / “PCM” • “DTS Digital Surround”: “PCM” Playing DVDs with incorrect settings may result noise that could damage your ears or speakers.
ENGLISH 5 PART NAMES AND FUNCTIONS (1) Front Panel q w e r t y u i o !0 !1 !2 !3 !4 !5 !6 !7 !8 SLOW/SEARCH button (7) !9 OPEN/CLOSE button (5) POWER button • Press once to turn the power on. • Press again to set to the “OFF” position and turn the power off. • Set the power to the standby mode by pressing the POWER OFF button on the remote control unit while the power is on. • Turn the power on from the standby mode by pressing the POWER ON button on the remote control unit.
ENGLISH (3) Display q w e r ty ui DISC DISC 1 2 3 4 5 DVD V CD VR AUDIO VIDEO PROGRESSIVE SCAN @0 q Source indicator w Tray indicator e r t y u i o !0 GROUP TITLE TRACK o !0 !1 !2 !3 !4 !5 D.MIX CHAP P.PCM MLT.CH V.S.S ANGLE ¡¡¡¡¡ ¡¡¡¡¡ REPEAT ALL CD DVD-V-A RANDOM PROGRAM !9 !8 1 DISCS TITLE • The number of the trays in which discs are loaded light. Play indicator • Lights during playback, flashes when the resume function is activated.
ENGLISH 6 REMOTE CONTROL UNIT 2 The DVM-4800 can be controlled from a distance using the included remote control unit (RC-548). (1) Inserting Batteries q Remove the remote control unit’s rear cover. w Place two batteries (“AA” (R6P)) in the battery compartment in the direction indicated by the marks. Cautions On Batteries • Use batteries (“AAA” (R03)) in this remote control unit.
ENGLISH (3) Names and Functions of Remote Control Unit Buttons POWER ON button Press this to switch the power on. TOP MENU button POWER OFF button Press this to display the top menu recorded on the disc. Press this to switch the power standby. Cursor buttons/ENTER button OPEN/CLOSE button Use the • and ª buttons to select in the vertical direction. Use the 0 and 1 buttons to select in the horizontal direction. Press the ENTER button to select the item selected with the cursor buttons.
ENGLISH IMPORTANT SETUP INFORMATION This set has the following presettings: “Disc Languages”, “Ratings”, “Menu Language”, “On-Screen Messages”, “FL Display”, “TV Aspect”, “Digital Audio Output” and “Other Settings”. These presettings have been preset upon shipment from the factory. If you wish to change them to suit your specific purposes, refer to pages 46 to 56. 7 LOADING DISCS 2 Set discs in the disc tray with the labeled (printed) side facing up.
ENGLISH (2) Loading Discs How to load a disc • Make sure the drawer is completely open. • Hold the disc by the edges and place it on the disc tray. (Do not touch the signal surface, i.e., the glossy side.) • Set the disc properly in the tray according to its size. Set 8 cm discs in the center hole. Set 12 cm discs in the outer hole. • When the drawer is opened during the stop mode, discs can be loaded in the 5 disc trays.
ENGLISH 8 PLAYBACK (1) Playback 1 3 4 2 2 1 MENU TOP MENU B PLAY HDCD AL24 PLUS GROUP PROGRESSIVE SCAN STILL / PAUSE STOP SUBTITLE OPEN / CLOSE POWER ¢ ON / STANDBY £ OFF AUDIO ONLY SKIP DISC SKIP SLOW / SEARCH 5 DISC 1 REMOTE SENSOR DISC 2 DISC 3 AUD 5 DVD Audio/Video Automatic Disc Loading System 6 DISC 4 DISC 5 LE ANG IO ENTER PCM AUDIO TECHNOLOGY / DVD AUDIO-VIDEO AUTO CHANGER DVM-4800 RETURN 4 1 2 3 POWER ¢ ON / STANDBY 1 £ OFF Turn on the power.
ENGLISH 5 6 Use the cursor buttons (•, ª, 0 and 1) to select the desired item. • For some discs there is a second menu screen. If so, press the 9 button to display the next menu screen. (See the disc’s jacket.) The cursor buttons (•, ª, 0 and 1) do not work for video CDs. Use the number buttons to select the desired item. Press the ENTER button. • The desired item is selected and playback starts.
ENGLISH (2) Selecting groups to play (for DVD-AUDIOs only) TOP MENU AUD SUBTITLE 2,3 ANG IO 2,3 LE ENTER RETURN 1 2 4 5 6 7 8 9 0 10 3 CLEAR 1 1 Press the GROUP button. • The group and track icons are displayed. G 1 T 1 (Remote control unit) ENTER 2 Use the cursor buttons (•, ª) to select the group number and press the ENTER button. (Remote control unit) (Remote control unit) ENTER 3 Use the cursor buttons (•, ª) to select the track number and press the ENTER button.
ENGLISH (3) To enjoy even higher quality sound-AUDIO ONLY 2 You can enjoy higher quality audio by stopping the video signal. 1 B PLAY HDCD AL24 PLUS GROUP PROGRESSIVE SCAN STILL / PAUSE STOP OPEN / CLOSE POWER ¢ ON / STANDBY £ OFF AUDIO ONLY SKIP DISC SKIP SLOW / SEARCH DISC 1 REMOTE SENSOR DISC 2 DISC 3 5 DVD Audio/Video Automatic Disc Loading System DISC 4 DISC 5 PCM AUDIO TECHNOLOGY / DVD AUDIO-VIDEO AUTO CHANGER DVM-4800 AUDIO ONLY 1 Press the AUDIO ONLY button.
ENGLISH MENU TOP MENU SUBTITLE SKIP buttons Cursor buttons PLAY button AUD ANG IO ENTER button STOP button LE ENTER SLOW/SEARCH buttons SKIP buttons RETURN B PLAY HDCD AL24 PLUS GROUP PROGRESSIVE SCAN STILL / PAUSE STOP OPEN / CLOSE STILL/PAUSE button RETURN button POWER ¢ ON / STANDBY £ OFF AUDIO ONLY SKIP DISC SKIP SLOW / SEARCH DISC 1 REMOTE SENSOR STOP button 1 2 3 4 5 6 7 8 0 10 PLAY button DISC 2 DISC 3 5 DVD Audio/Video Automatic Disc Loading System DISC
ENGLISH (5) Selecting the disc DISC 1 DISC 2 DISC 3 1 Press the button for the number of the desired disc (1 to 5). DISC 4 DISC 5 (Main unit) 2 Press the number of the desired chapter or track (0 to 10 and 10 button). (Remote control unit) 1 2 3 4 5 6 7 8 9 0 10 (Remote control unit) (6) Selecting DISC SKIP DISC SKIP Press the DISC SKIP button. • The carousel in the dreamer turns and the disc on the next tray is played.
ENGLISH (9) Skipping to the Beginning of Chapters or Tracks During playback, press one of the skip buttons. 8 : Reverse direction 9 : Forward direction • A number of chapters or tracks equal to the number of times the button is pressed is skipped. • When the skip back button is pressed once, the pickup returns to the beginning of the currently playing chapter or track.
ENGLISH 9 USING THE GUI SCREENS 2 Use this function to display and change information on the disc (titles, chapters, time, audio, subtitles, angles, etc.) and on the player (repeat, play mode, markers, etc.). 2,3,4 AUD ANG IO 4 LE ENTER RETURN 1 2 4 5 6 7 8 9 0 10 3 CLEAR 1 In the play or stop mode, press the DISPLAY button. • The GUI (Graphical User Interface) screen appears. • The picture on the TV screen switches each time the button is pressed.
ENGLISH 3 Use the 0 and 1 cursor buttons to select the item you wish to change. (Remote control unit) Use the • and ª cursor buttons to select the setting. • Some changes are effective immediately, while some changes are only made after the ENTER button or PLAY button is pressed. Also, some functions may not work from the stopped GUI screen. • Numbers (for titles, etc.) can be changed using the number buttons. When this is done, press the ENTER button to make the change effective.
ENGLISH 2 Description of Icons Displayed on the TV Screen (Unit Information Screen) Play menu Video menu e.g. DVD-Video AB e.g. U1 1 2 3 ✱✱ Icon Content A-B repeat ENTER button (start point) a ENTER button (finish point) To cancel ENTER button AB DVD-A DVD-V U1 Icon N Marker VCD CD DVD-A DVD-V VCD CD You can mark up to 5 positions to play again.
ENGLISH Icon Content U3 0 Audio menu High sharpness (−6 to +6) Finely adjusts the sharpness of the picture horizontally. e.g. DVD-Video V sharpness (−1 to +2) Increases the sharpness of the picture vertically. OFF OFF 0 Icon Edge (−3 to 0) Improves edges in the background to reduce fuzziness and improve the sense of depth. 0 Content DVD-V VCD ADVANCED SURROUND V.S.S. mode • SP-V.S.S.
ENGLISH 10 MARKING SCENES YOU WANT TO SEE AGAIN 2 Set marks at scenes you want to see again so that you can start playback from the marked position whenever you want. Setting Marks AUD ANG IO 2 LE ENTER RETURN 1 2 4 5 6 7 8 9 0 10 3 CLEAR 1 1 During playback, press the MARKER button. • The marker screen appears. • “*” is displayed if the mark is not set. (Remote control unit) 2 Press the MARKER button at the scene you want to mark. • A number is displayed.
ENGLISH Calling Out Marked Scenes and Clearing Marks 1 AUD ANG IO LE ENTER RETURN 1 2 4 5 6 7 8 9 0 10 3 CLEAR 1 ENTER 1 Use the 0 and 1 cursor buttons to select the marker number and press the ENTER button. • If the marker screen is not displayed during playback, press the MARKER button to display it. To clear the marker display: Press the RETURN button. To clear a marker: Use the 0 and 1 cursor buttons to select a marker number and press the CLEAR button.
ENGLISH During playback, press the REPEAT button.
ENGLISH Playing a Certain Section Repeatedly (A-B Repeat Playback) 1,2 REMOTE CONTROL UNIT RC-548 1 During playback, press the A-B REPEAT button. • The “REPEAT A-” indicator lights on the display. • This sets start point A. (Remote control unit) 2 Press the A-B REPEAT button again. • The “REPEAT A-B” indicator lights on the display. • This sets end point B and repeat playback of the A-B section starts. (Remote control unit) To return to normal playback: Press the A-B REPEAT button again.
ENGLISH 12 PLAYING TRACKS IN THE DESIRED ORDER 3 2 Use this function with DVD-A, video and music CDs to play the tracks in the desired order. (This function will not work for DVD-V.) 3 2 Up to 32 tracks can be set in a program.
ENGLISH NOTES: • The programmed track numbers on the disc of the displayed disc number appear lit on the music calendar. • Programming is not possible for DVD-V. • The PROG/DIRECT button does not function when DVD-V are loaded in all five trays. • The PROG/DIRECT button does not function during normal playback or programmed playback. • The PROG/DIRECT button does not function when the tray is open and neither the DVD-V.
ENGLISH 14 USING THE MULTIPLE AUDIO, SUBTITLE AND ANGLE FUNCTIONS Switching the Audio Language (Multiple Audio Function) 2 With DVDs containing multiple audio language signals, the audio language can be switched during playback. MENU TOP MENU 1 AUD SUBTITLE 2 ANG IO LE ENTER RETURN AUD 1 IO During playback, press the AUDIO button. • The current audio language number is displayed. • If no sound is recorded on the disc, “– –” is displayed.
ENGLISH Switching vocals ON or OFF for Karaoke discs (DVD/Video CD) MENU TOP MENU SUBTITLE 2 1 AUD ANG IO LE ENTER 2 RETURN AUD 1 IO Press the AUDIO button during play. (Remote control unit) Use the cursor buttons (•, ª, 0, 1) until the preferred setting is selected.
ENGLISH Switching the Subtitle Language (Multiple Subtitle Function) 2 With DVDs containing multiple subtitle language signals, the subtitle language can be switched during playback. MENU TOP MENU SUBTITLE 1 AUD 2 ANG IO LE ENTER RETURN SUBTITLE 1 During playback, press the SUBTITLE button. • The current subtitle language number is displayed. • If no subtitles are recorded on the disc, “– –” is displayed.
ENGLISH Switching the Angle (Multiple Angle Function) 2 With DVDs containing multiple angle signals, the angle can be switched during playback. MENU TOP MENU SUBTITLE 2 AUD ANG IO LE 1 ENTER RETURN ANG 1 LE 1 During playback, press the ANGLE button. • The current angle number is displayed. (Remote control unit) 2 2 Use the • and ª cursor buttons or the number buttons to select the desired angle. • The display turns off when the RETURN button is pressed.
ENGLISH Reproducing an Advanced Virtual Surround Sound effect 2 This player can reproduce a virtual surround sound effect which provides sound as if heard from the front speakers located at the horizontally further position or heard from nonexistent speakers even when only a 2-channel stereo system is connected [for playback of Dolby Digital DTS, MPEG, LPCM, 2-channel or over only]. 1 REMOTE CONTROL UNIT RC-548 Press the V.S.S. button during play.
ENGLISH 15 USING THE MENUS Using the Top Menu 2 For DVDs containing multiple titles, the desired title can be selected and played from the title menu. MENU TOP MENU SUBTITLE 1 2 AUD ANG IO 3 LE ENTER RETURN 2 1 2 4 5 6 7 8 9 0 10 3 CLEAR Example: TOP MENU 1 During playback, press the TOP MENU button. • The top menu appears. • If the TOP MENU button is pressed again, the disc returns to the point at which the title menu was called out and playback resumes from that point.
ENGLISH Using the DVD Menu 2 Some DVDs include special menus called DVD menus. For example, DVDs with complex contents may contain guide menus and DVDs with multiple languages may contain audio and subtitle language menus. These menus are called “DVD menus”. Here we describe the general procedure for using DVD menus. 1 MENU TOP MENU AUD SUBTITLE 2 ANG IO 3 LE ENTER RETURN 2 1 2 4 5 6 7 8 9 0 10 3 CLEAR Example: 1 During playback, press the MENU button. • The DVD menu appears.
ENGLISH 16 CHANGING THE DEFAULT SETTINGS 2 The default values preset upon shipment from the factory can be changed. The default settings are retained until they are again changed, even if the power is turned off. 2 AUD ANG IO LE ENTER RETURN 1 2 4 5 6 7 8 9 0 10 3 CLEAR 1 REMOTE CONTROL UNIT RC-548 1 In the stop mode, press the SET UP button. • The default setting screen appears. 1. Disc menu 2. Video menu 3. Audio menu 4. Display menu 5.
ENGLISH When “Disc Menu” is Selected TOP MENU AUD SUBTITLE 3,4 ANG IO 3,4 LE ENTER RETURN 4 1 2 4 5 6 7 8 9 0 10 3 CLEAR 1 See page 46. 2 3 4 Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. 1. Audio 2. Subtitle 3. Menus 4. Ratings Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. q When “Audio” is selected: 1. English (Factory default) Select this to play the sound in English. 2.
ENGLISH 4 e When “Menus” is selected: 1. English (Factory default) Select this to display the menus in English. 2. French Select this to display the menus in French. 3. Spanish Select this to display the menus in Spanish. 5. Other * * * * Select this to display the menus in a language other than the ones above. Use the number buttons to input the 4-digit language number shown on page 56.
ENGLISH When “Video Menu” is Selected MENU TOP MENU AUD 1,2,3,4 SUBTITLE 1,2,3,4 ANG IO LE ENTER RETURN Use the • and ª cursor buttons to select “TV Aspect”, then press the ENTER button. 1 2 3 q 4:3 Pan & Scan Select this when a conventional size TV is connected. • The video material formatted in the Pan & Scan style is played back in that style (the left and right edges are cut off). w 4:3 Letter Box Select this when a conventional size TV is connected.
ENGLISH 4 Use the cursor buttons (•, ª) to select the black level control and press the ENTER button. 1. Lighter (Factory default) [BLACK LEVEL: 7.5 IRE] The black level of the picture is selected to the lighter one. Select this setting normally when the player is connected to a TV set through the VIDEO OUT connector or S VIDEO OUT connector. (7.5 IRE is the standed for NTSC format in North America) 2. Darker [BLACK LEVEL: 0 IRE] The black level of the picture is selected to the darker one.
ENGLISH For your reference: • When the “On” is selected at the “Still Picture Display”, the following screen is displayed in the still picture mode; P: P-Picture (Predictive coded picture) This picture type is computed on the basis of a past I-Picture or P-Picture. Still(P) B: B-Picture (Bidirectionally-predictive coded picture) This picture type is computed by comparing the previous and subsequent I-Picture or P-Picture. It has the lowest volume of information.
ENGLISH 4 Use the cursor buttons (•, ª) to select the preferred setting and press the ENTER button. q When “Speaker Setting” is selected 1. Multi-channel Speaker presence and size ( a ) 1. Use the cursor buttons (•, ª, 0, 1) to select the item and press the ENTER button. 2. Use the cursor buttons (•, ª) to select the setting and press the ENTER button. Icon examples: Surround speaker (L) A Large: When the speaker supports low-frequency (under 100 Hz) reproduction.
ENGLISH 4 2. Yes During playback of the DVD recorded in Linear PCM of 48 kHz or 96kHz, digital audio converted to 48 kHz/16 bit is output. (Digital output of PCM audio is restricted to 48 kHz/16 bit or below for copyright protection. r When “Dolby Digital” is selected 1. Bitstream (Factory default) (NOTE 1 ) Dolby Digital bitstream (1 ch - 3/2.1 ch) is output during playback of the DVD recorded in the Dolby Digital. Select this setting when the player is connected to the Dolby Digital decoder. 2.
ENGLISH When “Display Menu” is Selected MENU TOP MENU AUD 3,4 SUBTITLE 3,4 ANG IO LE ENTER RETURN 1 See page 46. 2 ENTER 3 Use the • and ª cursor buttons to select the preferred item and press the ENTER button. 1. Menu Language 2. On-Screen Messages (Remote control unit) (Remote control unit) ACTION Display Menu Language On-Screen Messages English On SELECT ENTER RETURN Use the • and ª cursor buttons to select the preferred setting and press the ENTER button.
ENGLISH When “Others” is Selected MENU TOP MENU AUD 3 SUBTITLE 3 ANG IO LE ENTER RETURN 1 See page 46. 2 3 Use the cursor buttons (•, ª) to select the preferred setting and press the ENTER button. q When “Auto Power Off” is selected A demonstration of the unit’s on-screen displays starts when you select “On”. The demonstration stops when you press a button and the setting reverts to “Off”. w When “DVD-Video Mode” is selected 1.
ENGLISH Language code list Language Code Code Language Code Language Code Language 6565 Afar 7079 Faroese 7678 Lingala 8375 Slovak 6566 Abkhazian 7082 French 7679 Laothian 8376 Slovenian 6570 Afrikaans 7089 Frisian 7684 Lithuanian 8377 Samoan 6577 Ameharic 7165 Irish 7686 Latvian, Lettish 8378 Shona 6582 Arabic 7168 Scots Gaelic 7771 Malagasy 8379 Somali 6583 Assamese 7176 Galician 7773 Maori 8381 Albanian 6588 Aymara 7178 Guarani 7775 Macedonian
ENGLISH 17 TROUBLESHOOTING Check again before assuming the player is malfunctioning. 2 Are all the connections correct? 2 Are you following the instructions in the manual? 2 Are the amplifier and speakers operating properly? If the DVM-4800 does not seem to be functioning properly, check the table below. If this does not solve the problem, the DVM-4800 may be damaged. Turn off the power, unplug the power cord from the power outlet and contact your store of purchase or nearest DENON sales office.
ENGLISH 18 MAIN SPECIFICATIONS Signal system: Applicable discs: S-Video output: Video output: Component output: Audio output: Audio output properties: Digital audio output: Power supply: Power consumption: Maximum external dimensions: Mass: 2 Remote control unit: Type: Power supply: NTSC (1) DVD/video discs 1-layer 12 cm single-sided discs, 2-layer 12 cm single-sided discs, 2-layer 12 cm double-sided discs (1 layer per side) 1-layer 8 cm single-sided discs, 2-layer 8 cm single-sided discs, 2-layer 8 c
