DVD AUDIO-VIDEO/SUPER AUDIO CD PLAYER DVD-5910 OPERATING INSTRUCTIONS POWER OFF POWER ON HDMI/DVI SELECT OPEN/ CLOSE FORMAT NTSC/PAL SUPER AUDIO CD SETUP PROGRAM /DIRECT CLEAR SEARCH MODE CALL BACK LIGHT ANGLE OPEN/CLOSE PLAY SUBTITLE AUDIO TOP MENU DISPLAY MENU RETURN STOP STOP STILL/PAUSE SKIP PLAY SLOW/SEARCH STILL / PAUSE PAGE REPEAT ON / STANDBY HDMI / DVI SELECT FORMAT SUPER AUDIO CD SET UP PURE DIRECT SELECT A-B RANDOM MARKER ZOOM SETUP PICTURE ADJUST PICT ADJ.
IMPORTANT TO SAFETY WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. NOTE: This DVD audio-video/Super audio CD player uses the semiconductor laser. To allow you to enjoy music at a stable operation, it is recommended to use this in a room of 5 °C (41 °F) ~ 35 °C (95 °F). CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR REFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: 1.
ENGLISH FRONT PANEL !1 !2 !3 !4 !5 !6 !7 !8 !9 @0 @1 @2 OPEN/CLOSE PLAY STOP STILL / PAUSE ON / STANDBY VIDEO MODE HDMI / DVI SELECT FORMAT SUPER AUDIO CD SET UP PURE DIRECT SELECT PUSH ENTER DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER qw e r t u o y i !0 REAR PANEL @3 @9 3 @4 @5 @6 #0 #1 #2 #3 #4 #5 #6 DVD-5910 @7 @8 #7
SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Read Instructions – All the safety and operating instructions should be read before the product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All w arnings on the product and in the operating instructions should be adhered to. Follow Instructions – All operating and use instructions should be follow ed.
ENGLISH NOTE ON USE • Keep the set free from moisture, w ater, and dust. • Do not let foreign objects in the set. • Avoid high temperatures. Allow for sufficient heat dispersion w hen installed on a rack. • Unplug the pow er cord w hen not using the set for long periods of time. • Do not let insecticides, benzene, and thinner come in contact w ith the set. • Handle the pow er cord carefully. Hold the plug w hen unplugging the cord.
ENGLISH — TABLE OF CONTENTS — z Features...................................................................................7, 8 x Discs ............................................................................................9 c Cautions on Handling Discs.......................................................10 v Connections ......................................................................11 ~ 21 b Part Names and Functions ..................................................
ENGLISH 1 FEATURES 1. Newly developed high performance 10 bit I/P converter performing all processing with a precision of 10 bits A high precision film/video source detection function not only makes the DVD-5910 compatible w ith 30 frame film sources, but also achieves high quality images w ith smooth, natural pictures and little jaggy noise even w hen playing images that presented problems during editing.
ENGLISH 11. HDCD® (High Definition Compatible Digital®) decoder (NOTE 4) HDCD is an encoding/decoding technology that greatly reduces the distortion occurring at the time of digital recording w hile maintaining compatibility w ith the conventional CD format. HDCD allow s 20-bit data to be converted into the 16-bit data of current CDs w ith no loss in sound quality. 12.
ENGLISH ENGLISH 2 DISCS • The types of discs listed on the table below can be used on the DVD-5910. The marks are indicated on the disc labels or jackets.
ENGLISH ENGLISH 3 CAUTIONS ON HANDLING DISCS Discs Cautions on Handling Discs Only the discs including the marks show n on page 9 can be played on the DVD-5910. Note, how ever, that discs w ith special shapes (heart-shaped discs, hexagonal discs, etc.) cannot be played on the DVD-5910. Do not attempt to play such discs, as they may damage the player. Holding Discs Cautions on Storing Discs Avoid touching the surface of discs w hen loading and unloading them.
ENGLISH ENGLISH 4 CONNECTIONS NOTES: • Read the manuals of all the components w hen making • connections. • Keep the pow er supply cord unplugged until all connections • have been completed. • If the pow er is on w hen connections are made, noise may • be generated and damage the speakers. Be sure to connect the left and right channels properly, L (left) to L, R (right) to R. Plug the pow er supply cord securely into the pow er outlet. Incomplete connection may result in noise.
ENGLISH ENGLISH (2) Connecting to a TV or Monitor Equipped with Component video Input Connectors Component video output connectors (PR/CR, PB/CB and Y) The red (PR/CR), blue (PB/CB) and brightness (Y) signals are output independently, achieving more faithful reproduction of the video. • The component video input connectors may be marked differently on some TVs or monitors (PR, PB and Y/RY, B-Y and Y/CR, CB and Y, etc.). For details, refer to the TV’s operating instructions.
ENGLISH ENGLISH (3) Connecting to a AV amplifier with a built-in decoder When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD player’s digital audio output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound w ith the pow er and sense of presence of a movie theater or concert hall.
ENGLISH ENGLISH 2 Sound output from the DVD-5910’s digital audio output connectors [ In the case of bitstream output ] Settings DIGITAL OUTPUT Audio recording format NORM AL PCM Dolby Digital Dolby Digital bitstream 2 channels PCM (48 kHz / 16 bit) DTS DTS bitstream 2 channels PCM (48 kHz / 16 bit) DVD video [ In the case of PCM output ] Settings LPCM (44.
ENGLISH ENGLISH (4) Connecting a basic 5.1-channel surround system Analog 5.1-channel audio signals can be output from the DVD-5910. The multi-channel audio signals recorded in packed PCM and the multi-channel Super audio CDs can be played w hen an AV amplifier equipped w ith analog 5.1-channel audio inputs is connected. To pow er outlet SURROUND CENTER SUBWOOFER FRONT DVD-5910 CH SEL ENTER AV amplifier w ith 5.
ENGLISH ENGLISH (5) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.) ✽ Set the “ AUDIO SETUP” default setting as show n below. (See pages 40 ~ 44.) • “ DIGITAL OUTPUT” → “ PCM ” “ LPCM (44.1kHz/48kHz)” → “ ON” Playing DVDs w ith incorrect settings may result noise that could damage your ears or the speakers.
ENGLISH ENGLISH (7) DENON LINK connections High quality digital sound w ith reduced digital signal transfer loss can be enjoyed by connecting a separately sold DENON LINK compatible AV amplifier. To pow er outlet DVD-5910 2 DENON LINK S.E. (2nd) settings: • If you connect the DENON LINK, set to “ 2nd” . At “ DIGITAL INTERFACE SETUP” under “ SETUP” , set “ DENON LINK” to “ 2nd (AUTO)” ,” 2nd (1394) “ or “ 2nd (ANALOG)” . (See pages 33, 36.
ENGLISH ENGLISH (8) IEEE 1394 connections The simple connection of one IEEE 1394 cable permits high quality digital transfer of the follow ing betw een devices having IEEE 1394 connectors: the audio of DVD video, DVD audio that up until now could only be connected by 5-conductor audio cable in an analog connection, or Super Audio CD and other multi-channel audio.
ENGLISH ENGLISH NOTES: • Please use the included IEEE 1394 cable. When using a cable other than the included IEEE 1394 cable, please use a 4-pin IEEE 1394 cable w ith a length of 3.5 m or less for S400 or higher. • The “ IEEE 1394 audio signal (A&M protocol)” output from the DVD-5910’s IEEE 1394 connector not out video signals, please connecting to a TV or M onitor w ith “ component video output” or “ S-video output” or “ Video output” . (See pages 11, 12.
ENGLISH ENGLISH HDMI settings • When using HDM I connections, use the HDM I/DVI SELECT button on the main unit or the remote control unit to set “ HDM I Y Cb Cr” or “ HDM I R G B” . (See page 56. By default, this setting is set to “ HDM I/DVI OFF” .) Video settings • Set to “ 480P/576P” upon shipment from the factory. Can be set manually to change the resolution.
ENGLISH ENGLISH (10) DVI connections Connection w ith equipment that has a DVI (Digital Visual Interface)-D connector permits the transfer of digital images. ✽ When using display equipment that is not supported by the HDCP (content protection function), the image w ill not be output properly. ✽ M ake an audio connection also because an audio signal w ill not be output via the DVI-D connector. ✽ Commercially DVI cables are available in 24-pin and 29-pin types.
ENGLISH ENGLISH 5 PART NAMES AND FUNCTIONS (1) Front Panel See page 3. q w e r t y Power ON/STANDBY button • Press once to set to the standby mode. The indicator lights up in red. • Press again to turn the pow er on. The indicator lights up in green. Power indicator • This indicator lights w hen the pow er is on and w hen the pow er is in the standby mode. Light green : Pow er is on Light red : Pow er is in the standby mode • Press once to turn the pow er on.
ENGLISH ENGLISH (2) Rear Panel @3 #1 Audio output connectors (2ch AUDIO OUT) • Connect using the included audio cord. M ulti-channel sound is dow n-mixed and output. @4 • This is a terminal for future system expansion. #2 #3 S-Video output connector (S-VIDEO OUT) • Connect using an S-Video connection cord (available in stores). @6 Video output connector (VIDEO OUT) DVI-D-Video output connector (DVI-D OUT) • Connect using 24P DVI-D connection cord (available in stores).
ENGLISH ENGLISH 6 REMOTE CONTROL UNIT 2 The DVD-5910 can be controlled from a distance using the included remote control unit (RC-993). (1) Inserting Batteries q Remove the remote control unit’s rear cover. w Place three R6P/AA batteries in the battery compartment in the direction indicated by the marks. e Close the rear cover. Cautions On Batteries • Use R6P/AA batteries in this remote control unit.
ENGLISH ENGLISH (3) Names and Functions of Remote Control Unit Buttons 2 Button not explained here function in the same w ay as the corresponding buttons on the main unit.
ENGLISH ENGLISH 7 LOADING DISCS 2 Set discs in the disc tray w ith the labeled (printed) side facing up. Outer disc guide (12 cm disc) Inner disc guide (8 cm disc) Disc tray (2) Loading Discs • Pick up the disc carefully so as not to touch the signal surface and hold it w ith the labeled side facing up. • With the disc tray fully open, set the disc in the disc tray. • Set 12 cm discs in the outer disc guide (Figure 1), 8 cm discs in the inner disc guide (Figure 2). • Press the OPEN/CLOSE button.
ENGLISH ENGLISH 8 CHANGING THE DEFAULT SETTINGS POWER OFF POWER ON 1 2 M ake the initial settings to suit your usage conditions before starting playback. The initial settings are retained until they are next changed, even if the pow er is turned off.
ENGLISH ENGLISH Setup items for use Bold characters indicate factory defaults. LANGUAGE SETUP DIALOG SUBTITLE DISC M ENUS OSD LANGUAGE ENGLISH FRENCH SPANISH GERM AN JAPANESE OTHERS OFF ENGLISH FRENCH SPANISH GERM AN JAPANESE OTHERS The display depends on the connected device.
ENGLISH ENGLISH Bold characters indicate factory defaults.
ENGLISH ENGLISH When “LANGUAGE SETUP” is selected 1 See page 27. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. DIALOG Use this to set the language of the sound output from the speakers. 2 SUBTITLE Use this to set the language of the subtitles displayed on the TV. DISC MENUS Use this to set the language of the menus recorded on the disc (top menu, etc.).
ENGLISH ENGLISH w When “ SUBTITLE” is selected: OFF (Factory default) Select this if you do not w ant to display the subtitles. (For some discs it is not possible to turn off the subtitle display.) ENGLISH Select this w hen you w ant to play the DVD w ith the subtitles in English. FRENCH Select this w hen you w ant to play the DVD w ith the subtitles in French. SPANISH Select this w hen you w ant to play the DVD w ith the subtitles in Spanish.
ENGLISH ENGLISH Language code list Code 32 Language Code Language Code Language Code Language 6565 Afar 7079 Faroese 7678 Lingala 8375 Slovak 6566 Abkhazian 7082 French 7679 Laothian 8376 Slovenian 6570 Afrikaans 7089 Frisian 7684 Lithuanian 8377 Samoan 6577 Ameharic 7165 Irish 7686 Latvian, Lettish 8378 Shona 6582 Arabic 7168 Scots Gaelic 7771 M alagasy 8379 Somali 6583 Assamese 7176 Galician 7773 M aori 8381 Albanian 6588 Aymara 7178 Guarani 7
ENGLISH ENGLISH When “DIGITAL INTERFACE SETUP” is selected 1 See page 27. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. HDMI/DVI PICTURE ADJUST Sw itches the digital RGB video range (data range) via the HDM I and the DVI-D connectors. Remote control unit Remote control unit HDMI AUDIO SETUP 2 Use this to adjust for the audio signals via the HDM I connector.
ENGLISH ENGLISH B When “ M ULTI (LPCM )” is selected, use the • and ª cursor buttons to select the item to be set, then press the ENTER button. SPEAKER CONFIGURATION Use this to select the types of the different speakers. CHANNEL LEVEL Use this to adjust the output level of the different speakers. DELAY TIME Use this to set the distance from the different speakers to the listening position. ✽ To exit the HDM I SPEAKER SETUP mode.
ENGLISH ENGLISH B When “ DELAY TIM E” is selected: With 5.1-channel surround sound, ideally the distance betw een the listening position and all the speakers aside from the subw oofer should be the same. The delay time setting can be used to make the sound from the different speakers reach the listening position at the same time. Remote control unit Use the • and ª cursor buttons to select the setting item, then press the ENTER button.
ENGLISH ENGLISH e When “ HDM I AUTO FORM AT” is selected: PANEL RES. (Factory default) The HDM I output format is selected automatically according to the panel resolution of the connected HDM I device. MAX RES. The HDM I output format is selected automatically according to the maximum resolution of the connected HDM I device. When connected w ith a DVI device, the HDM I output format is fixed at 480P/576P.
ENGLISH ENGLISH B When “ AUTO PLAY” is selected: OFF (Factory default) Set this w hen you do not w ish to control the operation of this unit from another device. ON Set this w hen you w ish to control the operation of this unit from another device. Remote control unit Remote control unit I E E E 1 3 9 4 SE T UP 3 B When “ AUDIO FORM AT” is selected: FORMAT1 (Factory default) Set this w hen you conjunction w ith a DENON device. FORMAT2 This is a mode for future system expansion.
ENGLISH ENGLISH Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. q When “ TV ASPECT” is selected: 4:3 PS Select this to play w ide DVDs in the pan & scan mode (w ith the sides of the picture cut off). Discs for w hich pan & scan is not specified are played in the letter box mode. 4:3 LB Select this to play w ide DVDs in the letter box mode (w ith black strips at the top and bottom).
ENGLISH ENGLISH r When “ COM PONENT VIDEO OUT” is selected: (NOTE) PROGRESSIVE (Factory default) The signals output from the DVD-5910’s “ COM PONENT VIDEO OUT” connector are formatted in the progressive format. Select this w hen using the DVD-5910 connected to a progressive type TV. INTERLACED The signals output from the DVD-5910’s “ COM PONENT VIDEO OUT” connector are formatted in the interlaced format. Select this w hen using the DVD-5910 connected to an interlace type TV.
ENGLISH ENGLISH When “AUDIO SETUP” is selected 1 See page 27. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. AUDIO CHANNEL Use this to adjust for the connected speaker systems. DIGITAL OUTPUT Use this to select the digital output’s signal format. LPCM (44.1 kHz/48 kHz) Use this to set the digital audio output w hen playing DVDs recorded in linear PCM audio.
ENGLISH ENGLISH 2 The SRS TruSurround function (only for DVD-videos and Video CDs) The multi-channel sound normally achieved w ith five speakers is recreated using only the tw o front stereo speakers. This results in a sound w ith a nearly natural sense of movement that seems to surround the head, w ithout the strong directivity characteristic of multi-speaker systems. NOTES: • Note that for some discs the effect w ill be w eak or there w ill be no effect.
ENGLISH ENGLISH B When “ CHANNEL LEVEL” is selected, use the • and ª cursor buttons to select the speaker to be adjusted, then use the 0 and 1 cursor buttons to set the level. • TEST TONE Use the 0 and 1 cursor buttons to select auto or manual. Adjust so that the volume of the test tones output from the different speakers sounds the same. • The volume level output from the front speakers (left and right channels), center speaker, surround speakers (left and right channels) and subw oofer can be adjusted.
ENGLISH ENGLISH • When “ DEFAULT” is selected: When “ DEFAULT” is selected and the ENTER button is pressed, all the items are restored to their factory default settings. When digital connections are made w ith an AV amplifier, make the speaker settings on the AV amplifier. For DVD audio discs, the disc’s settings are given priority, so the sound may not be produced as set w ith the above speaker mode setting.
ENGLISH ENGLISH r When “ SOURCE DIRECT” is selected: OFF (Factory default) Please set to OFF w hen performing speaker settings or setting the delay time and playing back. ON Set to ON w hen playing back w ithout performing the processing of speaker settings. Performing this setting w ill result in the setting of the DTS recommended all-channel, full bandw idth playback. (Note that the volume of the sub w oofer w ill increase by 5 dB, and there w ill be an increase of 15 dB w ith a Super Audio CD.
ENGLISH ENGLISH When “RATINGS” is selected 1 See page 27. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. RAT I NGS 8(NO L IMI T) RAT I NG L EVE L PASSWORD 2 RATING LEVEL Use this to restrict playback of adult DVDs you do not w ant children to view. Note that even w ith adult DVDs, view ing cannot be restricted unless the restriction level is recorded on the disc. PASSWORD Use this to change the passw ord. The default passw ord is “ 0000” .
ENGLISH ENGLISH Remote control unit Remote control unit w When “ PASSWORD” is selected: Use the 1 cursor button to select the “ CHANGE” , then press the ENTER button. RAT I NGS RAT I NG L EVE L CHANGE PASSWORD Remote control unit E X I T SE TUP Remote control unit SE L ECT : DE C I S I ON : ENTER BUT TON Use the number buttons to input a old (current) 4digit passw ord. RAT I NGS The default passw ord is “ 0000” .
ENGLISH ENGLISH When “OTHER SETUP” is selected 1 See page 27. Use the • and ª cursor buttons to select the desired setting, then press the ENTER button. PLAYER MODE The DVD video play mode can be set to play the DVD video contents included on a DVD audio disc. CAPTIONS Use this to set w hether or not to display the closed captions recorded on DVDs. WALL PAPER Use this to select the image to be show n on the screen in the stop mode and CD play mode.
ENGLISH ENGLISH w When “ CAPTIONS” is selected: OFF (Factory default) Select this w hen you do not w ant to display the captions on the screen w hen playing DVDs containing English captions ON Select this to display the captions on the screen w hen playing DVDs containing English captions. NOTES: • An English caption decoder is required to display English captions. • DVDs w ith caption signals are indicated by the mark.
ENGLISH ENGLISH y When “ AUTO POWER M ODE” is selected: OFF (Factory default) The pow er does not automatically sw itch to the standby mode. ON The DVD-5910’s pow er turns off and the standby mode is set if the DVD-5910 remains in the stop mode for approximately 30 minutes.
ENGLISH ENGLISH 9 USING THE PURE DIRECT MODE SUPER AUDIO CD SETUP PROGRAM /DIRECT 2 In the pure direct mode, only analog audio signals (no video signals, etc.) are output, thereby achieving high quality sound.
ENGLISH 4 ENGLISH Press the PURE DIRECT SELECT button. The modes described below w ill appear on the display. NORM AL : All signals are output normally. M ODE 1 : The settings stored for M ODE 1 are used. The factory default settings are: “ DIGITAL OUTPUT” : “ ON” “ VIDEO OUT” : “ ON” “ DISPLAY” : “ ON” M ODE 2 : The settings stored for M ODE 2 are used.
ENGLISH ENGLISH 11 ADJUSTING THE PICTURE QUALITY CLEAR SEARCH MODE CALL BACK LIGHT ANGLE SUBTITLE AUDIO TOP MENU DISPLAY MENU RETURN 2,3,4,5,6,7 STOP STILL/PAUSE SKIP PLAY SLOW/SEARCH PAGE REPEAT A-B RANDOM MARKER ZOOM SETUP PICTURE ADJUST PICT ADJ. MEMORY DIMMER PURE DIRECT SELECT 1 1 Press the PICTURE ADJUST button. • The image quality adjustment screen w ill appear. STD Returns the settings to the factory default settings.
ENGLISH ENGLISH SHARPNESS (MID) (–6 to +6) (Factory default: 0) • This adjusts the sharpness of the image for the intermediate frequencies. SHARPNESS (HIGH) (–6 to +6) (Factory default: 0) 3 • This adjusts the sharpness of the image for the high frequencies. (Only effective for progressive images.) HUE (–6 to +6) (Factory default: 0) • This adjusts the balance betw een green and red. (This does not affect the component interlaced output.
ENGLISH ENGLISH When Gamma Correction is Selected and Adjusted: Tw o kinds of displays are prepared for adjustment of Gamma Correction. • When use the Numerical table of Gamma Correction. (Figure 1) :Pressing the cursor button (ª) • When use the Graph of Gamma Correction. (Figure 2) :Pressing the enter button 6 Remote control unit Select the adjust point w ith cursor buttons (0, 1), set the adjustment brightness level w ith cursor buttons (•, ª), and press the ENTER button.
ENGLISH ENGLISH P I CT URE MODE STD 7 When the Display Position is Selected and Adjusted: • Press the cursor button (ª ), then select the horizontal/vertical direction w ith the cursor buttons (0, 1), set the adjustment value w ith the (•, ª) cursor buttons, and press the ENTER button. SETUP LEVEL (0 IRE, 7.5 IRE) (Factory default: 7.5 IRE) • This corrects floating black. H. POSITION (–7 to +7) (Factory default: 0) • A position adjustment is permitted left and right. V.
ENGLISH ENGLISH 12 USING THE VIDEO SETUP 2 The video output setting of the HDM I and the DVI-D connectors can be changed. 2 The video output setting of the PICTURE M ODE, TV SYSTEM , SQUEEZE M ODE and AUDIO ADJUST also can be changed.
ENGLISH ENGLISH Turning the VIDEO M ODE knob. • The modes described below w ill appear on the display. Select the item you w ish to set and press the select knob to define it. PICTURE MODE It is possible to select betw een five modes at w hich picture quality settings are stored (M 1 to M 5) as w ell as the standard settings set upon shipment from the factory. (See pages 52 ~ 55.) TV SYSTEM Select the video output connected to the TV or monitor w hose image you w ant to view.
ENGLISH ENGLISH When “ PICTURE M ODE” is selected: • The modes described below w ill appear on the display. Select the item you w ish to set and press the VIDEO M ODE knob to define it. (See pages 52 ~ 55.) STD (STANDARD) Returns the settings to the factory default settings. M1 (MEMORY1) Picture quality adjustment items – M 1 (M EM ORY1) mode stored in the picture quality adjustment mode. M2 (MEMORY2) Picture quality adjustment items – M 2 (M EM ORY2) mode stored in the picture quality adjustment mode.
ENGLISH 4 ENGLISH When “ SQUEEZE M ODE” is selected: • The modes described below w ill appear on the display. Select the item you w ish to set and press the VIDEO M ODE knob to define it. OFF Select this to display as full size of a 16:9 TV, regardless of the image’s size. ON Select this to display the image w ith a ratio of 4:3 at the center of a 16:9 TV, regardless of the image’s size. AUTO Select this w hen playing back a 4:3 image display images w ith a 4:3 aspect ratio in the center of a 16:9 TV.
ENGLISH ENGLISH 13 PLAYBACK (1) Playback 3 2,4 POWER OFF 5 POWER ON HDMI/DVI SELECT FORMAT OPEN/ CLOSE NTSC/PAL SUPER AUDIO CD SETUP OPEN/CLOSE PLAY 1 2,4 STOP PROGRAM /DIRECT CLEAR SEARCH MODE CALL STILL / PAUSE BACK LIGHT ON / STANDBY ANGLE VIDEO MODE HDMI / DVI SELECT FORMAT SUPER AUDIO CD SET UP PURE DIRECT SELECT SUBTITLE AUDIO TOP MENU DISPLAY MENU RETURN PUSH ENTER DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-5910 6 STOP 1 1 SKIP (Green) 1 Turn on the pow er.
ENGLISH ENGLISH PLAY PLAY 5 Press the PLAY button. • For many interactive DVDs and video CDs w ith playback control, a menu screen appears. In this case use the procedure in step 6 to select the desired item. ✽ Interactive DVDs are DVDs including multiple angles, stories, etc. M ain unit Example: For DVDs w ith menu screens TOP MENU Apple Banana Remote control unit Example: For video CDs w ith playback control 1. Opening 2. 1st movement 3.
ENGLISH ENGLISH HDMI/DVI STOP button SELECT SKIP buttons FORMAT OPEN/ CLOSE NTSC/PAL SUPER AUDIO CD SETUP STILL/PAUSE button PROGRAM /DIRECT Number buttons CLEAR SEARCH MODE OPEN/CLOSE PLAY CALL STOP SEARCH M ODE button BACK LIGHT ANGLE SUBTITLE AUDIO TOP MENU DISPLAY MENU RETURN STILL / PAUSE ON / STANDBY ENTER button VIDEO MODE HDMI / DVI SELECT FORMAT SUPER AUDIO CD SET UP PURE DIRECT SELECT PUSH ENTER DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-5910 STOP STOP button ST
ENGLISH ENGLISH (5) Skipping to the Beginning of Chapters or Tracks Cueing using the SKIP buttons During playback, press one of the SKIP buttons on the main unit or the remote control unit. 8 : Reverse direction (PREVIOUS) 9 : Forw ard direction (NEXT) • A number of chapters or tracks equal to the number of times the button is pressed is skipped. • When the SKIP 8 button is pressed once, the pickup returns to the beginning of the currently playing chapter or track.
ENGLISH ENGLISH (8) Selecting the still image (only for DVD-audios) During playback, press the PAGE + or PAGE – button on the remote control unit. • For DVD audio discs w ith still images, the desired image can be selected. • On some discs the image cannot be selected due to the intentions of the discs’ producers.
ENGLISH ENGLISH 14 PLAYING REPEATEDLY 2 Use this function to play your favourite audio or video sections repeatedly. Playing Repeatedly (Repeat Playback) /DIRECT CLEAR SEARCH MODE CALL BACK LIGHT ANGLE AUDIO DISPLAY MENU RETURN STOP STILL/PAUSE SKIP 1 SUBTITLE TOP MENU PLAY SLOW/SEARCH PAGE REPEAT A-B RANDOM MARKER ZOOM SETUP PICTURE ADJUST PICT ADJ. MEMORY DIMMER PURE DIRECT SELECT In the play mode, press the REPEAT button.
ENGLISH ENGLISH Playing a Certain Section Repeatedly (A-B Repeat Playback) PROGRAM /DIRECT CLEAR SEARCH MODE CALL BACK LIGHT ANGLE SUBTITLE AUDIO TOP MENU DISPLAY MENU RETURN STOP STILL/PAUSE SKIP PLAY SLOW/SEARCH PAGE 1,2 REPEAT A-B RANDOM MARKER ZOOM SETUP PICTURE ADJUST PICT ADJ. MEMORY DIMMER PURE DIRECT SELECT A TO B SET A A TO B SET B A-B 1 During playback, press the A-B button. • This sets start point A. Remote control unit A-B 2 Press the A-B button again.
ENGLISH ENGLISH 15 PLAYING TRACKS IN THE DESIRED ORDER 2 Use this function w ith DVD-AUDIO discs, video CDs, Super audio CDs and music CDs to play the tracks in the desired order. 2 This function does not affect w ith DVD-VIDEO discs.
ENGLISH ENGLISH 16 PLAYING TRACKS IN THE RANDOM ORDER 2 Use this function w ith video CDs, Super audio CDs and music CDs to play the tracks in random order. With DVD-AUDIO discs, random playback is performed w ithin the selected group. 2 This function does not affect w ith DVD-VIDEO discs.
ENGLISH ENGLISH CLOSE 17 USING THE ON-SCREEN DISPLAY SELECT FORMAT NTSC/PAL SUPER AUDIO CD SETUP PROGRAM /DIRECT 2 Use this function to display and change information on the disc (titles, chapters, time, etc.) 3 CLEAR SEARCH MODE CALL BACK LIGHT ANGLE SUBTITLE AUDIO TOP MENU DISPLAY MENU RETURN 3 STOP STILL/PAUSE SKIP 1 2 2 PLAY SLOW/SEARCH PAGE In the play mode, press the DISPLAY button. • The On-Screen Display appears.
ENGLISH ENGLISH 18 USING THE MULTIPLE AUDIO, SUBTITLE AND ANGLE FUNCTIONS Switching the Audio Language (Multiple Audio Function) 2 With DVDs containing multiple audio language signals, the audio language can be sw itched during playback.
ENGLISH ENGLISH Switching the Subtitle Language (Multiple Subtitle Function) 2 With DVDs containing multiple subtitle language signals, the subtitle language can be sw itched during playback. CLOSE SELECT FORMAT NTSC/PAL SUPER AUDIO CD SETUP PROGRAM /DIRECT CLEAR SEARCH MODE CALL BACK LIGHT ANGLE SUBTITLE AUDIO TOP MENU DISPLAY MENU RETURN STOP STILL/PAUSE SKIP 1 2 PLAY SLOW/SEARCH PAGE REPEAT A-B RANDOM MARKER ZOOM SETUP PICTURE ADJUST PICT ADJ.
ENGLISH ENGLISH Switching the Angle (Multiple Angle Function) 2 With DVDs containing multiple angle signals, the angle can be sw itched during playback. HDMI/DVI SELECT FORMAT OPEN/ CLOSE NTSC/PAL SUPER AUDIO CD SETUP PROGRAM /DIRECT CLEAR SEARCH MODE CALL BACK LIGHT 1 ANGLE SUBTITLE AUDIO TOP MENU DISPLAY MENU RETURN STOP STILL/PAUSE SKIP 2 PLAY SLOW/SEARCH PAGE REPEAT A-B RANDOM MARKER ZOOM SETUP PICTURE ADJUST PICT ADJ.
ENGLISH ENGLISH 19 USING THE MENUS Using the Top Menu 2 For DVDs containing multiple titles, the desired title can be selected and played from the top menu. HDMI/DVI SELECT FORMAT OPEN/ CLOSE NTSC/PAL SUPER AUDIO CD SETUP PROGRAM /DIRECT 2 CLEAR SEARCH MODE CALL BACK LIGHT ANGLE 1 2 SUBTITLE AUDIO TOP MENU DISPLAY MENU RETURN STOP STILL/PAUSE SKIP 3 PLAY SLOW/SEARCH PAGE REPEAT A-B RANDOM MARKER ZOOM SETUP PICTURE ADJUST PICT ADJ.
ENGLISH ENGLISH Using the DVD Menu 2 Some DVDs include special menus called DVD menus. For example, DVDs w ith complex contents may contain guide menus, and DVDs w ith multiple languages may contain audio and subtitle language menus. These menus are called “ DVD menus” . Here w e describe the general procedure for using DVD menus.
ENGLISH ENGLISH 20 MARKING SCENES YOU WANT TO SEE AGAIN 2 Set marks at scenes you w ant to see again so that you can start playback from the marked position w henever you w ant. Setting Marks (for DVD-audios and DVD-videos only) CLEAR SEARCH MODE CALL BACK LIGHT ANGLE SUBTITLE AUDIO TOP MENU DISPLAY MENU RETURN 3 STOP STILL/PAUSE SKIP 2,3 PLAY SLOW/SEARCH PAGE 1 1 2 During playback, press the M ARKER button. • The marker screen appears.
ENGLISH ENGLISH 21 PLAYING IN THE ZOOM MODE HDMI/DVI SELECT FORMAT OPEN/ CLOSE NTSC/PAL SUPER AUDIO CD SETUP PROGRAM /DIRECT CLEAR SEARCH MODE CALL BACK LIGHT ANGLE 2 SUBTITLE AUDIO TOP MENU DISPLAY MENU RETURN STOP STILL/PAUSE SKIP PLAY SLOW/SEARCH PAGE REPEAT 1 2 A-B RANDOM MARKER ZOOM SETUP PICTURE ADJUST PICT ADJ. MEMORY DIMMER PURE DIRECT SELECT 1 In the play or pause mode, press the ZOOM button. • The zoom rate increases each time the ZOOM button is pressed.
ENGLISH ENGLISH 22 PLAYING MP3 Listening to MP3 CD, CD-Rs and CD-RWs 2 There are many music distribution sites on the internet from w hich music files in M P3 format can be dow nloaded. M usic dow nloaded as instructed on the site and w ritten onto a CD-R/RW disc can be played on the DVD-5910.
ENGLISH ENGLISH Use the • and ª cursor buttons to select the M P3 file you w ant to play, then press the PLAY button or ENTER button. • Playback starts. ✽ The display can be sw itched betw een the single elapsed time and the single remaining time and the track name by pressing the DISPLAY button. ✽ Programmed playback is not possible w ith M P3 discs. 3 ✽ To change the MP3 file Press the STOP button, then use the • and ª cursor buttons to reselect the desired M P3 file.
ENGLISH ENGLISH 23 PLAYING WMA 2 Listening to WM A (Window s M edia Audio) CD-R/CD-RW • This unit can play CD-R/RW music files that have been recorded in the WM A (Window s M edia™ Audio)* audio compression format. Window s M edia and the Window s logo are trademarks, or registered trademarks of M icrosoft Corporation in the United States and/or other countries. ✽ WM A (Window s M edia Audio): Audio coding of M icrosoft Corporation.
ENGLISH ENGLISH 24 PLAYING STILL PICTURE FILES (JPEG FORMAT) 2 JPEG files stored on Kodak picture CDs, Fujicolor CDs, CD-Rs and CD-RWs can be played as a slide show and enjoyed on the DVD-5910. Playing still picture 2 Kodak picture CDs and Fujifilm Fujicolor CDs can be played on the DVD-5910. When a CD (recording still picture) is played, the photographs on the CD can be displayed on a TV.
ENGLISH ENGLISH Use the • and ª cursor buttons to select the folder containing the file(s) you w ant to play, then press the ENTER button. 2 D I SC I NF ORMATION ✽ To change the folder Use the cursor button to select “ ROOT” , then press the ENTER button. The screen in step 1 reappears. Select the desired folder.
ENGLISH ENGLISH Special play modes for WMA and MP3 and JPEG files Use the 0 and 1 cursor buttons to select the play mode, the • and ª cursor buttons to select the special play mode.
ENGLISH ENGLISH 25 TROUBLESHOOTING Check again before assuming the player is malfunctioning 2 Are all the connections correct ? 2 Are you following the instructions in the manual ? 2 Are the amplifier and speakers operating properly ? If the DVD-5910 does not seem to be functioning properly, check the table below. If this does not solve the problem, the DVD-5910 may be damaged.
ENGLISH ENGLISH Symptom An image is not projected w ith an HDM I/DVI connection. Picture and sound are interrupted w ith HDM I/DVI connections Remote control unit does not operate. 84 Check Page • Check the HDM I/DVI connection.(Check the status of the HDM I/DVI indicators.) • Check w hether the connected monitor equipment or other equipment supports HDCP. (The DVD-5910 w ill not output a video signal unless the connected equipment supports HDCP.) • Check the settings of “ HDM I/DVI SELECT” .
ENGLISH ENGLISH 26 MAIN SPECIFICATIONS Signal system: Applicable discs: S-Video output: Video output: Component output: HDMI output: DVI output: Audio output: Audio output properties: Digital audio output: Power supply: Power consumption: Maximum external dimensions: Mass: 2 Remote control unit: Type: Power supply: NTSC/PAL (1) DVD-Audio/DVD-Video discs 1-layer 12 cm single-sided discs, 2-layer 12 cm single-sided discs, 2-layer 12 cm double-sided discs (1 layer per side) 1-layer 8 cm single-sided di
TOKYO, JAPAN w w w.denon.
