DVD AUDIO-VIDEO PLAYER DVD-3800 OPERATING INSTRUCTIONS MODE D’EMPLOI INSTRUCCIONES DE OPERACION - 000~ oood o(TJoQ - - .
NOTE: IMPORTANT TO SAFETY This DVD video player WARNING: uses the semiconductor enjoy music at a stable operation, laser. To allow you to it is recommended to use this in a room of 5 “C (41 “F) - 35 “C 195 “F). TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR REFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: 1.
FRONT PANEL PANNEAU AVANT PANEL FRONTAL -I REAR PANEL PANNEAU ARRIERE PANEL TRASERO 3 I
SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. Read Instructions - All the safety and operating instructions should be read before the product is operated. Retain lnstructrons - The safety and operatrng rnstructrons should be retained for future reference. Heed Warnings - All warnings on the product and In the operating instructions should be adhered to. Follow lnstructrons - All operating and use instructrons should be followed. Cleaning - Unplug this product from the wall outlet before cleaning.
NOTE ON USE / OBSERVATIONS RELATIVES A CUTILISATION / NOTAS SOBRE EL US0 l l l l Avoid hrgh temperatures Allow for suffrcrent heat drspersron when l Installed on a rack. l Evrter des temperatures Proteger I’apparerl l’eau et lapoussrere. contre water, l I’humrdite, l Do not let foreign objects in the set. Ne pas larsser des objets &rangers I’appareil. No deje objetos extrarios dans dentro del benzene, and equip0 Mantenga el equrpo lrbre de humedad, agua y polvo.
- TABLE OF CONTENTS - q Features.. ................................................................................ .6, 7 q Discs.. ................................................................................. ...... .8 q Cautions on Handling Discs.. ...................................................... .9 .I 0 - 15 q connections .................................................................... q Part Names and Functions ................................................. .
3. HDCD@ (High Definition Compatible Digital) 8. Multiple decoder (NOTE 1) HDCD is an encoding/decoding reduces technology converted CD format. HDCD the high resolution playing technology data to be makes it possible to achreve HDCD-compatible optimrzes HDCD-compatible the high sound quality normal CDs are automatically digital signal processing Dolby Digital (ACJ)/DTS /DTS decoder, allowing movie theater characteristic be played.
02 l DISCS The types of discs listed on the table below can be used on the DVD-3800. The marks are Indicated on the disc labels or jackets W Disc terminology l Groups and tracks DVD-audios (DVD-audio4 are divided into several large sections “groups” and smaller sections Numbers are allotted to these sections. called “group numbers” called called “tracks”. These numbers are and “track numbers”.
03 CAUTIONS ON HANDLING DISCS Only the discs including the marks shown on page 8 can be played on the DVD-3800. Note, however, that discs with special shapes l Do not get fingerprints, l Be especially grease or dirt on discs. careful not to scratch discs when removing (heart-shaped discs, hexagonal discs, etc.) cannot be played on the DVD-3800. l Do not bend discs. Do not attempt to play such discs, l Do not heat discs. l Do not enlarge the center hole.
04 CONNECTIONS NOTES: I l l Read the manuals connections. Keep the power of all the components when making l cord unplugged until all connections have l l Plug the Incomplete If the power is on when connections be generated the left and rrght channels properly, L (left) to L, R (rrght) to R. been completed. l Be sure to connect are made, noise may l and damage the speakers.
I Color component output connectors (PFVCR, PB/CB and Y) The red (PR/CR), blue (PBKB) and brightness (Y) signals are output reproduction The color component l input connectors Y, B-Y and Y/CR, CB and Y, etc.). Connect l independently, achieving more faithful of the colors. may be marked differently in this way if your TV is compatible -Fw on some TVs or monitors For details, refer to the TV’s operating with Progressive (PR, PB and Y/R- instructions. Scan.
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream audio output connectors. If a Dolby Digital or DTS decoder of a movie theater or concert is connected, signals are output from the DVD player’s digital you can achieve sound with the power and sense of presence hall.
n Sound output from the DVD-3800’s digital audio output connectors In the case of bit stream output Settings DIGITAL OUT Audio recording format NORMAL PCM Dolby Digital Dolby Drgrtal bitstream 2 channels PCM (48 kHz / 16 bit) I DVD vrdeo I DTS brtstream DTS / I 2 channels PCM (48 kHz / 16 bit) In the case of PCM output Settings LPCM SELECT Audro recordrng format Copy protectron ON Lrnear PCM DVD vrdeo Video CD MUSICCD ON I48kHz/16-24bitPCM I I I96kHz/l6-24bitPCM 48 kHz / 16 bit PCM
Analog 5.1.channel audio signals can be output from the DVD-3800. The multichannel audio signals recorded in packed PCM can be played when an AV amplifier equipped with analog 5.1~channel audio inputs is connected. To power outlet El DVD-3800 Center speaker Front speaker (left) Front speaker (right) Subwoofer Surround speaker (left) 1 IIIJ II I ISurround ~ speaker (right) - AV amplifier wrth 5.1.
* Set the “AUDIO “DIGITAL l “LPCM SETUP” default setting as shown below. (See page 33.) OUT” + “PCM” (44.1 kHz/48kHz)” Playing DVDs with incorrect i “ON” settings may result noise that could damage your ears or the speakers DVD-3800 Input connector DVD-3800 /m Stereo component NOTES: l When connectrng CHANNEL” to a Z-channel audio stereo (see page 301.
05 PART NAMES AND FUNCTIONS See page 3. 0 Power Skip button button l l Press once to turn the power on. l Press again to set to the “OFF” positron and turn the l power off. l Set the power to the standby mode by pressing the POWER OFF button on the remote control unit while the power is on. l indicator This indicator Remote Thus indicator lights when the audio signals of a DVD, etc.
@ Video l @ output Connect connectors (VIDEO OUT) @ using the Included audio video cord. l Component video output connectors (COMPONENT VIDEO OUT) l @ Connect S-Video l @ connector (S-VIDEO l Audio @ cord (avarlable In l @ Connect Digital l connectors audio output Connect @ (AUDIO connector using an audro cord. OUT) (ROOM TO ROOM/IN) DENON for wired remote control.
06 n REMOTE CONTROL UNIT The DVD-3800 can be controlled from a distance using the included remote control unit (K-553). @ Remove the remote control unit’s rear cover. Cautions On Batteries l Use “AA” l Replace the batteries (R6P) batteries in this remote control unit. with new ones approximately a year, though this depends on the frequency once with which the remote control unit is used.
n Button not explained corresponding here function buttons POWER ON/POWER in the same way as the Use this to switch the set’s video output format (NTSC/PAL) OFF buttons d Press thus to switch the power between on and standby. Number NTSCIPAL button r on the maln unit. OPEN/CLOSE button I buttons Press this to switch between the normal Use these to Input numbers. Use the +I0 button to Input numbers of 10 or over. Example.
07 n LOADING DISCS Set discs in the disc tray with the labeled (printed) srde facing up. l Pick up the disc carefully so as not to touch the signal surface and hold it wrth the labeled side facing up. l l With the disc tray fully open, set the disc in the disc tray. Set 12 cm discs In the outer tray guide (Figure I), 8 cm discs In the inner tray guide (Frgure 2). 8 cm drsc guide l Press the OPEN/CLOSE button. The disc is automatically loaded.
08 n CHANGING THE DEFAULT SETTINGS Make the initial settrngs to suit your usage conditrons before starting playback. The initial settrngs are retained untrl they are next changed, even if the power is turned off. Turn on the power e Press the power button, the power indicator lights and the power \ Marn unrt Remote contr 01 unit In the stop mode, press the SETUP button. settings) screen appears. nus, the rnrtral values can be changed during playback. language to be used when playrng the disc.
Bold characters indicate factory defaults l”‘SCCS’D:AUL’oG 7 - SUBTITLE L ???!TING ENGLISH FRENCH SPANISH GERMAN JAPANESE OTHERS t 0 (LOCK ALL) 1 2 3 4 5 6 7 8 (NO LIMIT) OFF ENGLISH FRENCH SPANISH GERMAN JAPANESE OTHERS DISC MENUS LEVEL 7 i OLD PASSWORD NEW PASSWORD COMFIRM PASSWORD PASSWORD -CHANGE PLAYER MODE ENGLISH FRENCH SPANISH GERMAN JAPANESE OTHERS CAPTIONS L ;I / COMPRESSION IOSD SETUP1 c OSD LANGUAGE I t WALL PAPER ENGLISH FRANGAlS ESPAtiOL AUTO POWER MODE SLIDE SHOW ____
I,&3 Use the A and 7 cursor buttons to select the desired setting, then press the ENTER button. Remote control unit Remote control unit Remote control unrt Remote control unit Use this to set the language of the sound output from the speakers. Use this to set the language of the subtitles displayed on the TV. DISC MENUS Use this to set the language of the menus recorded on the disc (top Use the A and v cursor buttons to select the desired settrng, then press the ENTER button.
@ When “SUBTITLE” is selected: OFF (Factory default) Select this if you do not want to display the subtrtles. discs it is not possible to turn off the subtitle display.) (For some ENGLISH Select this when you want to play the DVD with the subtitles in English. FRENCH Select this when you want to play the DVD with the subtitles in French. SPANISH Select this when you want to play the DVD with the subtitles in Spanish. GERMAN Select this when you want to play the DVD with the subtitles in German.
I,%3 Use the A and 7 cursor buttons to select the desired setting, then press Remote control unrt Remote control unrt Remote control unrt Remote control unrt the ENTER button. OSD LANGUAGE Use this to set the messages displayed language for the default on the TV screen (“PLAY”, setting screen and etc.) WALL PAPER Use this to select the image to be shown on the screen In the stop mode and CD play mode.
@ When “WALL PAPER” IS selected: BLUE (Factory default) Select this to display a blue background on the TV display. Select this to display a gray background on the TV drsplay. Select this to display a black background Select this to display the wallpaper on the TV display. on the TV display. * To exit the setup mode Use the 7 cursor butten to select “EXIT SETUP”, then press the ENTER button. It IS also possible to quit by pressing the SETUP button on the remote control unit.
Use the A and v cursor buttons to select the desired settrng, then press the ENTER button. @I When “TV ASPECT” 4:3 is selected: j\ PS Select this to play wide DVDs in the pan & scan mode (wrth the sides of the picture cut off). Discs for which pan & scan IS not specified are played in the letter box mode. 4~3 LB Select this to play wide DVDs in the letter box mode (with black strips at the top and bottom). WIDE (16:9) (Factory default) Select this to play wide DVDs in the full-screen mode.
@ When “BLACK LEVEL” IS selected: DARKER Reduces the standard level of the video output srgnal’s black level. Set this If the image on the TV IS far too bright. LIGHTER (Factory default) Sets the vrdeo output srgnal’s black level to the standard level. 3 !& When “SQUEEZE MODE” IS selected: “SQUEEZE MODE” only effectrve for progressive output. OFF (Factory default) Set this to display 4:3 video signals over the entire screen of a 16:9 TV.
See page 21. Use the A and v cursor buttons to select the desired settrng, then press the ENTER button. AUDIO CHANNEL Use this to adjust for the connected Remote control unit Remote control unit Remote control unit Remote control unit speaker systems. DIGITAL OUT Use this to select the drgital output’s signal format. LPCM (44.1 kHz/48 kHz) Use this to set the drgital audio output when playing DVDs recorded linear PCM audio.
@When “MULTI CHANNEL” is selected, use the A and 7 cursor buttons to select the item to be set, then press the ENTER button. ENTER SPEAKER CONFIGURATION Use thus to select the types of the different speakers. b CHANNEL LEVEL Use this to adfust the output level of the different speakers. Remote control unit DELAY TIME Use this to set the distance listenrng positton. from the different Ji: To exit the SPEAKER SETUP mode Use the 7 cursor button to select “AUDIO ENTER button.
ENTER e: 0 When “DELAY TIME” is selected With 5.1-channel surround sound, ideally the distance between the listening posrtion and all the speakers aside from the subwoofer should be the same. The delay time settrng can be used to make the sound from the different speakers reach the listening position at the same time. Use the A and 7 cursor buttons press the ENTER button.
@ When “DIGITAL OUT” IS selected: NORMAL (Factory default) When playing DVDs recorded in Dolby Drgital or DTS, bitstream signals are output from the drgrtal audio output terminals. When playtng DVDs recorded In linear PCM or packed PCM, linear PCM signals are output. Select “NORMAL” when makrng digital connections to an AV amplifier with built-in Dolby Drgrtal and DTS decoder.
See page 21. A Use the A and 7 cursor buttons to select the desired setting, then press the ENTER button. % RATING LEVEL CJ Use this to restrict playback of adult DVDs you do not want children to view. Note that even wrth adult DVDs, viewrng cannot be restricted unless the restriction level is recorded on the disc. It is however possible to disable playback of all DVDs. v g ‘TTY pt4 : \\ ‘L ix ‘\ Remote control unit j ENTER PASSWORD Use this to change the password.
Use the number buttons to input a 4-digit password, then press the ENTER button. * The set’s password is set to “0000” by default. * Do not forget the password. * The setting cannot be changed without Inputting the correct password. Remote colntrol unit Remote control unit @? When “PASSWORD” IS selected: Use the number buttons to input a 4-dlgit password, then press the ENTER button. $ Do not forget the password. *The setting cannot be changed wlthout Inputting the correct password.
See page 21. Use the A and 7 cursor buttons to select the desired setting, then press the ENTER button. PLAYER MODE The DVD video play mode can be set to play the DVD vrdeo contents included on a DVD audio disc. Remote control unit Remote control unit Remote control unit Remote control unit CAPTIONS Use this to set whether on DVDs. or not to drsplay the closed captions recorded COMPRESSION Use this to set the dynamic range output when playrng drscs.
(3 When “CAPTIONS” IS selected: OFF (Factory default) Select this when you do not want to display the captions on the screen when playrng DVDs contarning English captions ON Select this to display the captrons on the screen when playrng DVDs containtng English captions. ‘j:~ When “COMPRESSION” IS selected: OFF (Factory default) Select thus for the standard range. ON Select this to achieve powerful sound even when tile volume IS low.
9 PLAYBACK El 3 5 I \II I- 2, 4 ~$6V Light Turn on the power. l Press the power button, the power indicator lights and 1 the power turns on. l When standby mode, press the POWER ON button of remote control unit. crjf~ ?gY Remote control unit oPEN2LoSE s 2 Press the OPEN/CLOSE ops button to open the disc tray. Main unit 3 Remote control unit Set the disc in the disc tray. q Press the OPEN/CLOSE l 4 For many interactive playback control, use the procedure $ Interactive button.
Press the PLAY button. Maln unit l For some discs there is a second press the )H menu screen. Remote control unit If so, button to display the next menu screen. (See the disc’s jacket.) 31:The cursor buttons (A, v, 4 and b) do not work for video CDs. Use the number buttons to select the Remote control unit desired Item. Press the ENTER button. l The desired item is selected l You can return to the menu screen by pressing the TOP MENU/MENU and playback starts.
STILL/PAUSE button SKIP buttons Number buttons SLOW/SEARCH uring playback, press the STOP button V S S. button STOP button STILL/PAUSE SKIP buttons SLOW/SEARCH on the main unit or the remote STOP the STOP button is pressed, that posrtron is flashes on the drsplay. When the At this time, “b” PLAY button is pressed after pressing the STOP button, playback resumes % from Maln unit function at which is cancelled it was stopped.
Cueing using the SKIP button During playback, press one of the skip buttons on the main unit or the remote control unit. 144 ))I l : Reverse drrection (PREVIOUS) : Forward direction A number of chapters (NEXT) or tracks equal to the number of times the button is pressed is skipped. l Marn unrt When the skip back button IS pressed once, the pickup beginning of the currently playing chapter or track.
n Using the V.S.S. (Virtual Surround even when only front speakers expansion, Sound) function gives the sound a sense of expansion (left and right) are used. For discs with surround and allows you to achieve surround effects signals, the V.S.S. functron not only gives the sound it also makes it seem as if sound is coming from the srdes, even though there are no speakers there. During playback, press the V.S.S. button on the remote control unit.
010 n USING THE PURE DIRECT MODE In the pure direct mode, only analog audio signals (no video signals, etc.) are output, thereby Press the P.D.MEMORY l The output status achieving high quality sound button on the remote control unit. of the video signals, etc., can be stored at MODE1 and MODE2 as desired. Remote control unit Use the A and 7 cursor buttons to select the mode, then press the ENTER button. DIGITAL OUTPUT ON: Digital audio signals are output.
011 ADJUSTING THE PICTURE QUALITY 2,3,4, Press the PIC.ADJ button durrng playback. picture memory, l then press the ENTER button. The display switches as follows: STD (STANDARD) tf Ml (MEMORY I) t3 M2 t3 M3ttM4ttM5 STD (Factory default) When this is selected, both the prcture quality and function are reset to factory settrng. lrty settings you have adjusted Select the item to change using 4 and can Remote control unrt buttons.
5 Use the A and adjustrnent 7 cursor buttons to set the value. Remote control unit 6 ENTER b Press the ENTER button. l All the adjustments are stored in the memory. Remote control unit 7 Use the 4 and ) cursor buttons to select the pornt to be set. Use the A and 7 cursor buttons to adjust brightness level of the selected point. (See “Reference” l The level when the increases on page 48.
REFERENCE: (I) On the gamma correction display, the horizontal axis indicates the brightness level of the Image as recorded on the disc, while the vertical axis indicates the brightness level of the image when output from the set.
012 USING THE ON-SCREEN DISPLAY H Use this fl 1 to display and change iliformation l The On-Screen l The picture on the TV screen switches l The Items displayed Example: on the disc (titles, c:hapters, time, etc.) Display appears. Remote control unit each time the button is pressed. differ from disc to disc. For DVD audio discs Example: For DVD video discs Example: For video and mu! Normal playback screen l Normal playback screen l Normal playback screen +I-,---.
13 PLAYING El n Use this function l REPEATEDLY to play your favorite audio or vrdeo sections repeatedly The display on the TV screen switches each time the button is pressed, and the corresponding repeat play or stop mode is set.
During playback, press the A-B button. * Thus sets start point A. Remote control unit Press the A-B button again. This sets end point B, and repeat playback l of the A-B sectron Remote control unrt * To return to normal playback: Press the A-B button until “A TO B CANCELLED” appears on the TV screen. NOTES: l l l Repeat playback may not work for some DVDs. The repeat playback and A-B repeat playback functions shown on the display during playback.
014 PLAYING TRACKS IN THE DESIRED ORDER H Use this function with video CD and music CDs to play the tracks in the desired order In the stop mode, press the PROG/DIR button once. l The program selection screen appears. Remote control unrt Use the number buttons to select the track number you want to program. EX: To program track 5 and track 12: Remote control unit Press the PLAY button.
015 PLAYING TRACKS IN THE RANDOM ORDER W Use this function This function 1 with video and music CDs to play the tracks in random order. does not affect with DVD In the stop mode, press the RANDOM The random play screen appears. button. l % Remote control unit 2 \ Press the PLAY button. l The tracks start playing In random order. 5 k Main unit l Remote control unit Random playback IS not possible for some discs.
16 Ll n MP3 PLAYBACK There are many music distribution as instructed If music recorded on commercially software), sites on the internet from which music files in MP3 format can be downloaded. on the site and written Music downloaded onto a CD-R/RW disc can be played on the DVD-3800. available music CDs IS converted on a computer into MP3 files using an MP3 encoder (conversion the data on a 12 cm CD is reduced into about l/IO the amount of the orrginai data.
Use the A and cursor buttons to select the MP3 file you want to play, then press the PLAY button or ENTER button. l Playback starts. * The display can be switched elapsed time and the single between the srngle remaining pressing the DISPLAY button. * Programmed playback is not possible time with by MP3 * To change the MP3 file Press the STOP button, then use the A and 7 cursor buttons to reselect the desrred MP3 file. * To set the random play mode In the stop mode, press the RANDOM button.
017 PLAYING STILL PICTURE FILES (JPEG FORMAT) n JPEG files stored on Kodak picture CDs, CD-Rs and CD-RWs can be played as a slide show and enjoyed on the DVD-3800. n Kodak picture CDs can be played on the DVD-3800. When a picture CD is played, the photographs on the prcture CD can be displayed on a TV. (“Picture CD” is a service by which photographs taken on conventional silver film cameras are converted on CDs. For details on Picture CD, contact a store that offers Kodak development services.
Use the A and 7 cursor buttons to select the folder contarnrng the file(s) you want to play, then press the ENTER button. 2 * To change the folder Use the A cursor button to select “ROOT” at the upper right of the screen, then press the ENTER button. The screen in step 1 reappears. Select the desired folder.
Special play modes for MP3 and JPEG files Use the 4 and ) cursor buttons to select the play mode, the A and 7 cursor buttons to select the special play mode.
018 n USING THE MULTIPLE AUDIO, SUBTITLE AND ANGLE FUNCTIONS With DVDs containing multlple audio language signals, the audio language can be switched during playback 2 2 1 AUDIO “:-- ? AUOIX$Ig3:DOLBY03/2.1 1 During playback, press the AUDIO button. l The current audio language number is displayed ENGLISH Remote control unit AUDlO&3:DOK3Y 03/2.1 FRENCH 2 Use the A and v cursor buttons to select the desired language l The display turns off when the AUDIO button is pressed.
n With DVDs containing multiple subtitle language signals, the subtitle language can be switched during playback ' 1 SIJBTITW OfiD : ENGLISH During playback, press the SUBTITLE button. l The current subtitle language number is displayed. Remote control unit 2 Use the A and v cursor buttons to select the desired language l The display turns off when the SUBTITLE button IS pressed.
n With DVDs contarnrng multrple angle srgnals, the angle can be switched during playback. During playback, press the ANGLE button l The current angle number IS displayed. Remote control unit Use the A and v cursor buttons to select the desired angle. l The display turns off when the ANGLE button IS pressed. Remote control unrt NOTES: l The multiple l “ANGLE” angle function only works with discs on which multiple l At scenes where multrple angles are recorded, angles are recorded.
q19 USING THE MENUS H For DVDs containing multiple titles, the desired title can be selected and played from the top menu. Example: 1 During playback, press the TOP MENU button. l The top menu appears. Remote control unit A 0 4 Use the cursor or number buttons to select the desrred title. 2 l If you select the title number using the number buttons, 3 below. b 7 a& Remote control unit skip step <1>@a (4)@@ O@ g @ 6 Remote control unit ENTER Press the ENTER button.
n Some DVDs include special menus called DVD menus. For example, DVDs with complex contents may contain subtitle guide menus, and DVDs with multiple languages may contain audio and language menus. These menus are called “DVD menus”. Here we describe the general procedure for using DVD menus. During playback, press the MENU button. l The DVD menu appears. Remote control unit Use the cursor or number buttons to select the desired item.
020 n MARKING SCENES YOU WANT TO SEE AGAIN Set marks at scenes you want to see again so that you can start playback from the marked positron whenever lr3 2,3 1 MARKER During playback, press the MARKER button. l 1 Use the 4 and ) you want cursor buttons to select the “*” marks. l l The marker screen appears. “*” is displayed if the mark is not set. Press the ENTER button % Remote control unrt at the scene you want to mark. l 2 l A number IS displayed. Up to five marks can be set.
021 PLAYING IN THE ZOOM MODE In the play or pause mode, press the ZOOM button. l The zoom rate Increases each time the ZOOM button is pressed For DVD video drscs and vrdeo CDs: OFF + xl .5 + x2 --f x4 + OFF ZOOM For DVD audro drscs: OFF --f x2 + x4 + OFF % * When “PLAYER “AUDIO”, * When 2 zooming “PLAYER “VIDEO”, MODE” Use the cursor buttons SETTING” in “SETUP” is set to Remote control unit is not possible at the top menu or with still pictures.
22 TROUBLESHOOTING III n n n Are all the connections Are you following Are the amplifier If the DVD-3800 be damaged. sales correct 7 the instructions and speakers does not seem in the manual operating to be functioning Turn off the power, unplug ? properly 7 properly, the power cord check from the table the power If this does not solve and contact your the problem, store of purchase the DVD-3800 or nearest may Denon office 3yrriprurr1 L”WK l Power does not turn on.
q23 MAIN SPECIFICATIONS Signal NTSCJPAL system: Applicable (I) DVD-Audio/DVD-Vrdeo discs 1-layer 12 cm single-sided discs, Z-layer 12 cm single-sided discs: (I layer per side) l-layer 8 cm single-sided discs, 2-layer 8 cm single-sided discs, Z-layer 12 cm double-sided discs, 2-layer 8 cm double-sided discs discs (I layer per side) (2) Compact discs (CD-DA, Video CD) 12 cm discs, 8 cm drscs S-Video Output connectors: Video Output output: Component S connectors, 2 sets level: 1 Vp-p (75
DENON,Ltd.
