User Guide

2
DVD-2800II
SPECIFICATIONS
Signal System: NTSC/PAL
Applicable Discs: (1) DVD/Video discs
1-layer 12 cm single-sided discs, 2-layer 12 cm single-sided discs,
2-layer 12 cm double-sided discs (1 layer per side)
1-layer 8 cm single-sided discs, 2-layer 8 cm single-sided discs,
2-layer 8 cm double-sided discs (1 layer per side)
(2) Compact discs (CD-DA, Video CD)
12 cm discs, 8 cm discs
S-Video Output: Y output level: 1 Vp-p (75 Ω/ohms)
C output level: 0.286 Vp-p (For U.S.A. & Canada model)
0.3 Vp-p (For Europe model)
Output connectors: S connectors, 1 set
AV 1 connector, 1 set (For Europe model)
Video Output: Output level: 1 Vp-p (75 Ω/ohms)
Output connector: Pin-plug jacks, 1 set
AV 1 connector, 1 set (For Europe model)
Component Output: Y output level: 1 Vp-p (75 Ω/ohms)
C
B output level: 0.648 Vp-p (75 Ω/ohms) (For U.S.A. & Canada model)
0.7 Vp-p (75 Ω/ohms) (For Europe model)
C
R output level: 0.648 Vp-p (75 Ω/ohms) (For U.S.A. & Canada model)
0.7 Vp-p (75 Ω/ohms) (For Europe model)
Output connector: Pin jack, 1 set
RGB Output: Output level: 0.7 Vp-p (75 Ω/ohms) (For Europe model)
Output connector: AV 1 connector, 1 set (For Europe model)
Audio Output: Output level: 2 Vrms, 1 set
Audio Output Properties: (1) Frequency response
1
DVDs (linear PCM) : 2 Hz to 22 kHz (48 kHz sampling)
: 2 Hz to 44 kHz (96 kHz sampling)
2
CDs : 2 Hz to 20 kHz
(2) S/N ratio
1
DVDs : 115 dB
2
CDs : 115 dB
(3) Total harmonic distortion
1
DVDs : 0.0025 % (For Europe model)
: 0.0020 % (For U.S.A. & Canada model)
2
CDs : 0.0025 % (For Europe model)
: 0.0020 % (For U.S.A. & Canada model)
(4) Dynamic range
1
DVDs : 108 dB
2
CDs : 100 dB
Digital Audio Output: Optical digital output : Optical connector, 1 set
Coaxial digital output : Pin jack, 1 set
Power Supply: AC 120 V, 60 Hz (For U.S.A. & Canada model)
AC 230 V, 50 Hz (For Europe model)
Power Consumption: 22 W (For U.S.A. & Canada model)
18 W (For Europe model)
Maximum External Dimensions: 434 (W) × 132 (H) × 339 (D) mm (including protruding parts)
Mass: 6.5 kg
 Remote Control Unit: RC-546
Type: Infrared pulse
Power Supply: DC 3 V, 2 "AAA" /R03 batteries
∗ Design and specifications are subject to change without notice in the course of product improvement.
SAFETY PRECAUTIONS
The following check should be performed for the continued protection of the customer and service technician.
LEAKAGE CURRENT CHECK
Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the unit is defective.