User's Guide

SIGNAL
GND
1 2
SYSTEM
CONNECTOR
L
R
SPEAKER SYSTEM
SPEAKER IMPEDANCE
4 16
CD
DVD/AUX
TUNER PHONO TAPE MD
AUX-2 TAPE MD
PB
REC
INPUTS
L
R
L
R
1
ENGLISH
7
3
CONNECTIONS
Before beginning
• Turn off components.
• Connect the power cord last.
• Connect everything securely. Loose connections can lead to
distortion.
• To prevent damage to cords, connect and disconnect by holding
the plug, not the cord.
• Make sure that you connect the white PIN-plug to the left (L-
white) jack and the red PIN-plug to the right (R-red) jack.
Power cord and plug
Left (White) and Right (Red)
out PIN-plugs
reifilpmAF92-PD
Connections
1
Connect the Left and Right PIN-plugs of the
turntable’s output cord to your amplifier’s PHONO
jacks etc.
2
After all connections have been made.
• Connect the turntable’s power cord to the AC OUTLET
of your stereo amplifier, optional audio timer or directly
to a household AC outlet.
NOTE:
• If the platter starts rotating when the power cord is
connected, press the STOP button once.
2
E2E3出力.indd 1 2012/04/10 16:39:08