User Guide

76
Troubleshooting
Error message Cause/Solution
No Media Cannot detect media.
Unformat
The media is formatted in an unsupported format. Format the media on DN-900R or
set the format to FAT16 or FAT32.
Media Full
The remaining space on the media is running low. Replace the media with a new one
or delete files that are no longer required.
Track Full
The number of files on the selected media exceeds 2000. Recording cannot be
performed if the number of files exceeds 2000. Replace the media with a new media
or delete unneeded files.
Write Inhibited The selected media is write-prohibited. Remove the write-protection from the media.
File Not Found Target file does not exist. Check the file.
Track Not Found The target track does not exist. Check the media.
Already Exists
A file with the same name already exists.
• Copy, Move, Divide: Check the folder.
• Rename: Change the file name before entering the name.
Err Media XX Not supported on this unit. Replace the media.
VBR
This error message appears when a VBR file search is performed. Search cannot be
performed on VBR files. When the selected track is VBR format, the estimated
remaining time is displayed.
Not Allowed
Not Available
This appears when an invalid operation is performed. The operation may be disabled
due to other setting items such as the preset menu, etc. Check the details of the
operation.
No Mark There are no marks for the mark jump. Set marks.
Some files are skipped
There is a file with the same name in the copy or move location.
Files with the same name cannot be copied or moved.
ALC
The Rec Level cannot be changed when the ALC settings are enabled. Turn the ALC
settings off to change the Rec Level.
Registered
The file that have been added to a program, hot start, or timer playback list. Files
registered to these lists cannot be edited.