User Guide

7
Audio Connections
Analog Connection (Balanced Connection)
Connect line-level analog inputs/outputs to the analog
(balanced) input/output terminals for playback or
recording.
Connecting the Power Cord
Insert the power cord when all other connections are
completed. Be sure to connect the ground wire also.
Notes:
• Be sure to insert the power plug firmly into the
AC outlet. If the plug is not properly inserted, it
could cause a malfunction or noise.
• Do not unplug the power cord while the unit is
operating.
• Do not use a power cord other than the cord
supplied with this unit.
Inserting an SD Card
1. Open the SD card door in the direction indicated by the arrow. The
screen will display SD# DOOR OPEN (where # is the selected SD card
slot number).
2. The SD card can only be inserted one way – label up and connector
first. Insert the SD card fully into the SD card slot until a "click" sound
is heard.
3. Close the SD card door.
If the SD card door does not close with a "click," check that the SD
card is fully inserted into the slot.
MIC/LINE
SETTING VIA MENU
UNBAL. COAXIAL
AES/EBU
UN
B
BAL.
AUDIO
RL
OUT
AUDIO
RL
IN
1:GND
2:Hot
3:Cold
CDR/CD
Amp
Mixer
Preamp
SD card door
SD card
LAN DANTE 2X2
RS-232C
AC IN
NETWORK SD/USB RECORDER DN-900R
COAXI AL
AES/EBU
To AC outlet
European, UK and Asia/Pacific models
To AC outlet
U.S.A. and Canada models
Power cord
(supplied)