User Guide

39
Recording
1. Press Rec. The unit switches to the recording paused state, and the Rec button flashes.
When “On” is selected in Preset Setting > One Touch Rec, recording starts immediately
when Rec is pressed.
2. Adjust the recording level and recording balance. Select “Variable” in System Setting >
Volume Input. The input level may only be adjusted when ALC is set to “Off” and Audio
Input is set to “Bal” or “UnBal” in Preset Setting.
3. Select Preset Setting > Rec Level Type.
• Master/Bal: The input level may be adjusted using the jog dial. Also, hold down Shift
and turn the jog dial to adjust the input level balance for the left and right channels.
• Separate L/R: The input level of the left channel may be adjusted using the jog dial.
Also, hold down Shift and turn the jog dial to adjust the input level balance for the right
channel.
4. Press Rec to start recording.
• Pre-recording: When the pre-recording time is set in Preset Setting > Pre Record,
when recording is started, the recording starts retroactively for the set amount of time.
• Press Pause to pause the recording. Press Rec again to resume recording on the
same file.
• When Auto Mark in the preset menu is set to On, a mark is added at the point where
the recording is resumed from the paused status.
• If the directory in which the recording is saved is the root directly, the total number of
folders and files is limited to 512 by the FAT16 file system.
5. Press Stop to stop recording. Press Play to playback the recorded file.
Dual recording: The selected media and backup media may be recorded simultaneously.
1. Select the media to record.
2. Select the backup media. Dual recording is given priority when both Dual Rec and Relay Rec
are selected in Preset Setting.
3.
Start recording using the same operation as detailed in the Recording section. Recording
starts simultaneously for the selected media and backup media.
• The Backup Media file is stored in the folder set in System Setting > Date Form.
• During recording, if the free space is fully used in the selected media first, recording to
both the selected media and backup media stops.
• During recording, if the free space is fully used in the backup media first, recording to
the backup media stops but continues to the selected media.
• When the selected media and backup media are the same media, dual recording is
canceled, and normal recording starts.
• When the record monitoring is on, normal recording starts only for the selected media.